93.080.20 道路建筑材料 标准查询与下载

BS EN 12697-45:2020 沥青混合物 测试方法 饱和老化拉伸刚度（SATS）调节测试

Bituminous mixtures. Test methods. Saturation Ageing Tensile Stiffness (SATS) conditioning test

BS EN 12697-46:2020 沥青混合物 测试方法 单轴拉伸试验的低温开裂和性能

Bituminous mixtures. Test methods. Low temperature cracking and properties by uniaxial tension tests

BS EN 12697-40:2020 沥青混合物 测试方法 原位排水性

Bituminous mixtures. Test methods. In situ drainability

BS EN 12697-21:2020 沥青混合物 测试方法 使用板样品进行压痕

Bituminous mixtures. Test methods. Indentation using plate specimens

BS EN 12697-34:2020 沥青混合物 测试方法 马歇尔试验

Bituminous mixtures. Test methods. Marshall test

BS EN 12697-39:2020 沥青混合物 测试方法 燃烧的粘合剂含量

Bituminous mixtures. Test methods. Binder content by ignition

BS EN 12697-1:2020 沥青混合物 测试方法 可溶性结合剂含量

Bituminous mixtures. Test methods. Soluble binder content

BS EN 12697-6:2020 沥青混合物 测试方法 沥青试样体积密度的测定

Bituminous mixtures. Test methods. Determination of bulk density of bituminous specimens

BS EN 12697-20:2020 沥青混合物 测试方法 使用立方体或马歇尔标本压痕

Bituminous mixtures. Test methods. Indentation using cube or Marshall specimens

BS EN 12697-19:2020 沥青混合物 测试方法 试样的渗透性

Bituminous mixtures. Test methods. Permeability of specimen

BS EN 12697-11:2020 沥青混合物 测试方法 骨料与沥青之间亲和力的测定

Bituminous mixtures. Test methods. Determination of the affinity between aggregate and bitumen

DS/EN 1824:2020 道路标线材料 道路试验

Road marking materials – Road trials

BS EN 1824:2020 道路标记材料. 道路试用

Road marking materials. Road trials

DS/EN 1871:2020 道路标线材料 油漆、热塑性塑料和冷塑材料 物理性能

Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties

PN-EN 1343-2013-05 D 外部铺路用天然石材路缘石 要求和试验方法

Kerbs of natural stone for external paving - Requirements and test methods

PN-EN 1341-2013-05 D 外部铺路用天然石板 要求和试验方法

Slabs of natural stone for external paving - Requirements and test methods

ASTM D7228-06a(2020) 沥青路面层温度预测标准试验方法

1.1 This test method covers a means of predicting temperatures within the asphalt-bound layer(s) of a flexible pavement section. 1.2 Deflection testing commonly involves the measurement of pavement surface temperatures. This standard is based on temperature relationships developed as part of the Federal Highway Administration (FHWA) Long Term Pavement Performance (LTPP) Seasonal Monitoring Program. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

ASTM D243/D243M-20 残留指定穿透的标准试验方法

Standard Test Method for Residue of Specified Penetration

ASTM D7369-20 用间接拉伸试验测定沥青混合料弹性模量的标准试验方法

1.1 This test method covers procedures for preparing and testing laboratory-fabricated or field-recovered cores of asphalt mixtures to determine resilient modulus values using a repeated-load indirect tension test. 1.2 The values stated in SI units are regarded as the standard. Values in parentheses are for informational use. 1.3 A precision and bias statement for this standard has not been developed at this time. Therefore, this standard should not be used for acceptance or rejection of a material for purchasing purposes. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test

ASTM D4695-03(2020) 一般路面偏差测量标准指南

1.1 This guide provides procedural information for measuring pavement surface deflections, directly under, or at locations radially outward (offset) from a known static, steady-state, or impulse load. Deflections are measured with sensors that monitor the vertical movement of a pavement surface due to the load. This guide describes procedures for the deflection measurement using various deflection testing devices and provides the general information that should be obtained regardless of the type of testing device used. 1.2 This guide is applicable for deflection measurements performed on flexible asphalt concrete (AC), rigid portland cement concrete (PCC), or composite (AC/PCC) pavements. Rigid pavements may be plain, jointed, jointed reinforced, or continuously reinforced concrete. 1.3 The values stated in SI units are to be regarded as standard. Inch-pound units given in parentheses are for information purposes only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for General Pavement Deflection Measurements