93.080.20 道路建筑材料 标准查询与下载

JT/T 537-2018 钢筋混凝土阻锈剂

Reinforced concrete rust inhibitor

JT/T 536-2018 路桥用塑性体改性沥青防水卷材

Plastic body modified asphalt waterproofing membrane for roads and bridges

DB61/T 1159-2018 建筑垃圾再生材料挤密桩施工技术规范

本标准规定了建筑垃圾再生材料挤密 桩处理黄土地区不良土质地基的材料 、 施工工艺 、 质量管理与 验收标准 。 本标准适用于各等级公路采用建筑垃圾再生材料挤密桩处理黄土地区不良土质地基处理 。 地基土的含水率大于 24% 、 饱和度大于 65% 时 ， 应通过试验确定其适用性 。

Construction technical specification for construction waste recycled material compaction pile

DB61/T 1160-2018 道路用建筑垃圾再生材料加工技术规范

本标准规定了道路用建筑垃圾再生材料加工场地设计 、 原材料 、 加工设备选型 、 加工技术及质量控 制 、 环境保护要求的内容 。 本标准适用于各等级新建及改建公路工程所用建筑垃圾再生材料的加工 。

Technical specifications for the processing of construction waste recycled materials for road use

DB37/T 5125-2018 城镇透水路面养护技术规程

本规程适用于山东省行政区域内市政道路竣工验收后交付使用的透水路面的养护。

Technical specification for urban permeable pavement maintenance

ASTM D7063/D7063M-18 压实沥青混合料样品有效孔隙率和有效空隙率的标准试验方法

1.1 This test method covers the determination of effective porosity or effective air voids of compacted mixtures by the use of a vacuum sealing method. 1.2 This method can be used for compacted field and laboratory asphalt mixture samples, as well as other compacted samples with well-defined geometrical shapes, such as concrete cylinders, cored rocks, and metal samples. 1.3 The results of this test method can be used to determine the degree of interconnectivity of air voids within a sample and can be correlated to permeability of compacted asphalt mixture samples. 1.4 A multi-laboratory precision and bias statement for this standard has not been developed at this time. Therefore, this standard should not be used for acceptance or rejection of a material for purchasing purposes. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.6 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples

DB21/T 2999-2018 辽宁省温拌沥青混合料设计与施工技术规范

Liaoning province warm mix asphalt mixture design and construction technical specification

DB51/T 2512-2018 ACMP温拌改性沥青应用技术

本标准涉及到ACMP沥青温拌改性剂、ACMP温拌改性沥青及其混合料的设计、生产、施工和质量检查与验收的技术要求。 本标准适用于四川省范围内ACMP温拌改性沥青及其沥青混合料的生产、使用和检验。

Application Technology of ACMP Warm Mix Modified Asphalt

DB51/T 2514-2018 公路硅藻土改性沥青混合料应用技术指南

本标准规定了公路硅藻土改性沥青混合料施工技术的术语和定义、原材料、混合料设计、施工工艺、施工质量管理和检验验收等要求。 本标准适用于四川省内的公路硅藻土改性沥青混合料施工。

Technical Guidelines for Application of Diatomite Modified Asphalt Mixture for Highway

BS EN 12274-5:2018 浆料铺面 测试方法 最低粘结剂含量和耐磨性的测定

Slurry surfacing. Test method. Determination of the minimum binder content and wearing resistance

BS EN 13285:2018 未结合的混合物 规格

Unbound mixtures. Specifications

DB37/T 5122-2018 探地雷达测定道路结构层厚度技术规程

本规程适用于山东省行政区域内，应用探地雷达在旧路调查及工程验收阶段的道路结构层厚度测定。

Technical specification for measuring the thickness of road structure layer by ground penetrating radar

ASTM D8159-18 从沥青混合物中自动提取沥青粘合剂的标准试验方法

Standard Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures

ASTM D4280-18 延长寿命型、不可流动、凸起的反光路面标记的标准规范

1.1 This specification covers nonplowable, retroreflective raised pavement markers for nighttime lane marking and delineation. 1.2 The values stated in inch-pound units are to be regarded as the standard, except where noted in the document. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

BS EN 13880-13:2018 热涂接缝密封剂 测定不连续延伸的试验方法（粘附试验）

Hot applied joint sealants. Test method for the determination of the discontinuous extension (adherence test)

BS EN 13880-10:2018 热涂接缝密封剂 连续拉伸和压缩后粘附力和内聚力测定的试验方法

Hot applied joint sealants. Test method for the determination of adhesion and cohesion following continuous extension and compression

DB3302/T 1097-2018 公路沥青混凝土路面快速封层施工技术规范

Technical specification for rapid sealing of highway asphalt concrete pavement

DB15/T 1417-2018 胶粉改性沥青及混合料设计与施工规范

Code for design and construction of rubber powder modified asphalt and mixture

DB33/T 2118-2018 超薄易密实沥青混凝土（ECA）技术应用规范

Technical application specification for ultra-thin easy-compacting asphalt concrete (ECA)

ASTM D7741/D7741M-18 使用旋转手持式粘度计测量沥青橡胶或其他沥青粘合剂的表观粘度的标准测试方法

1.1 The use of high-viscosity asphalt binders like asphaltrubber is becoming more common in the United States and worldwide. Specifications such as Specification D6114 note the need for field control of the apparent viscosity and require the use of a field production rotational viscometer. The testing of asphalt-rubber binder for use in asphalt-rubber hot mix and for asphalt-rubber membrane is necessary to ensure consistent mix properties that will ensure good performance of these materials. Logistics of field applications limits the use of conventional laboratory controls and testing equipment. This test, using a handheld rotational viscometer, can be conducted in either the field or laboratory to determine the apparent viscosity of asphalt-rubber and other high-viscosity binders for field production control and to assess the uniformity of the binder produced, or for other related purposes. 1.2 Asphalt-rubber binder consists of a blend of paving grade asphalt cement and crumb rubber as described in Specification D6114. Other high-viscosity asphalt binders may consist of asphalts modified with polymer or fiber, or both. Testing is performed following the specified reaction time, if any, within the production process. Control of the raw materials is separate from the test. 1.3 The values stated in SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; each system shall be used independently of the other. Combining values from the two systems may result in noncompliance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer