共找到 648 条与 铁路建筑 相关的标准,共 44 页
Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions; German version EN 13146-6:2012
为统一铁路工程特殊岩土勘察的技术要求,保障勘察质量,制定本规程。本规程适用于新建,改建铁路勘察设计,施工和运营阶段的特殊岩土勘察工作。
Code for Special Soil and Rock Investigation of Railway Engineering
Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance; German version EN 13146-2:2012
Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads; German version EN 13146-3:2012
Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance; German version EN 13146-5:2012
Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force; German version EN 13146-7:2012
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint; German version EN 13146-1:2012
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2012
BS EN 16432-1. Railway applications. Ballastless track systems. General requirements
This European Standard is applicable to fastening systems, in categories A-E as specified in EN 13481-1:2012, 3.1, for use on concrete sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1. The requirements apply to: fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; fastening systems for the rail sections in EN 13674-1 (excluding 49 E4) and EN 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only.
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
This European Standard is applicable to fastening systems, in categories A-C and E as specified in EN 13481-1:2012, 3.1, for use on wood sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1. The requirements apply to: fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; fastening systems for the rail sections in EN 13674-1 (excluding 49E4) and EN 13674-4.This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints.This standard is for type approval of a complete fastening assembly only.
Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers
This European Standard specifies performance requirements for special fastening systems, in categories A-E as specified in EN 13481-1:2012, 3.1, for switches and crossings and check rails secured within the overall fastening system (not independently fixed to the bearers) on wood, concrete and steel bearers, in ballasted track and on slab track and which have maximum axle loads and minimum curve radii in divergent track in accordance with Table 1. The requirements apply to fastening systems which incorporate a resilient element and act on the foot and/or web of the rail and which are intended for use with stock rail sections in EN 13674-1 (excluding 49E4) and EN 13674-4+A1.This standard is not applicable to rigid fastening systems.This standard is for type approval of a complete fastening assembly only. Requirements for quality control are included in the standards applicable to individual components.
Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails
This European Standard is applicable to fastening systems, in categories A-C and E as specified in EN 13481-1:2012, 3.1, for use on rectilinear steel sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1. The requirements apply to: fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; fastening systems for the rail sections in EN 13674-1 (excluding 49E4) and EN 13674-4+A1. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only.
Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers
This European Standard is applicable to fastening systems, in categories A-D as specified in EN 13481-1:2012, 3.1, for attaching rails to the uppermost surface of concrete or asphalt slabs and for embedded rails in non-ballasted tracks, with maximum axle loads and minimum curve radii in accordance with Table 1. The requirements apply to: a) fastening systems which act on the foot and/or web of the rail including direct and indirect systems; b) fastening systems which incorporate concrete elements and which each have not more than one supporting element per rail, including booted concrete blocks and sleepers complete with boots; c) adhesive and mechanical fastening systems for embedded rail but excluding rail cast into road pavements. In the case of (b), the concrete element is considered to be part of the fastening system. If the system includes concrete elements which each have more than one supporting location per rail, those concrete elements are considered to be part of the slab and not part of the fastening system. This standard is only applicable to fastening systems for rail sections in EN 13674-1 (except 49E4) and EN 13674-4+A1; it is not applicable to special fastening systems for use at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only.
Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel
Railway applications. Track. Test methods for fastening systems. Determination of attenuation of impact loads
Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
Railway applications. Track. Test methods for fastening systems. Effect of repeated loading
Railway applications. Track. Test methods for fastening systems. Determination of longitudinal rail restraint
Railway applications. Track. Test methods for fastening systems. Determination of torsional resistance
Railway applications. Track. Test methods for fastening systems. Determination of electrical resistance
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号