93.120 飞机场建筑 标准查询与下载

DS/EN 61823:2003 机场照明和信标用电气装置 AGL 系列变压器

This standard specifies the characteristics of aeronautical ground lighting series transformers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under con

Electrical installations for lighting and beaconing of aerodromes - AGL series transformers

DIN EN 61823:2003 机场照明和航路信用电气设备.AGL系列变压器

Electrical installations for lighting and beaconing of aerodromes - AGL series transformers (IEC 61823:2002, modified); German version EN 61823:2003

BS EN 61822:2003 机场照明和信标导航用电气装置.恒流调节器

This International Standard specifies the requirements for a Constant Current Regulator (CCR) having a nominal output of 6,6 A for use in an aeronautical ground lighting constant current series circuit. However CCRs may be manufactured which have a different power rating (kVA) and current steps than those specified in this standard Text deleted. This standard shall be applied where appropriate for these CCRs.

Electrical installations for lighting and beaconing of aerodromes - Constant current regulators

BS EN 61823:2003 机场照明和信标导航用电气设备.AGL系列变压器

This standard specifies the characteristics of aeronautical ground lighting series transformers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of up to 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under conditions defined in this standard. An AGL series transformer is be able to withstand a permanent short or open-circuit secondary series circuit. Specifications for similar series transformers intended for any primary or secondary currents other than 6,6 A, or to supply alternative voltages, constant power, reactive loads, etc., are not included in this standard.

Electrical installations for lighting and beaconing of aerodromes - AGL series transformers

DS/EN 61821:2003 机场照明和信标用电气装置 航空地面照明恒流串联电路的维护

This International Standard applies to the maintenance of AGL constant current series circuits. This International Standard - covers constant current series circuits for AGL installed at aerodromes and heliports; - concentrates on provideing the safety requirements for the maintenance of an AGL constant current series circuit. IT is recognised that AGL constant current series circuits of different design characteristics and parameters are in existence; - is mainly concerned with safety to persons by specifying the rules and fundamental principles for the maintenance of AGL constant current series circuits; - is not intended to apply to AGL primaery series c

Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits

DS/IEC/TS 62143:2003 机场照明和信标的电气装置 航空地面照明系统 安全生命周期方法开发指南

This Technical Specification - outlines a methodology to address safety at all lifecycle phases of an AGL system, including the evaluation, design, procurement, manufacture, installation, commissioning, operational use, maintenance, modification and decommisioning of the AGL system; Note 1 This document contains guidelines of a high-level, objective-based, and non-prescriptive nature. This is intended to permit a flexible approach to meeting the requirements.

Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology

BS DD IEC TS 62143:2003 飞机场的照明和标志灯的电气装置.航空地面照明系统.安全生命活期法的开发指南

Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology

IEC TS 62143:2002 机场照明和信标用电气装置.航空地面照明系统.安全生命周期方法制定指南

This technical specification: - outlines a methodology to address the safety at all lifecycle phases of an AGL system, including the evaluation, design, procurement, manufacture, installation, commissioning, operational use, maintenance, modification, an

Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology

IEC 61821:2002 机场照明和航路信标用电气装置.航空地面照明恒流串联电路的维修

This International Standard applies to the maintenance of AGL constant current series circuits. This International Standard · covers constant current series circuits for AGL installed at aerodromes and heliports; · concentrates on providing the safety requirements for the maintenance of an AGL constant current series circuit. It is recognised that AGL constant current series circuits of different design characteristics and parameters are in existence; · is mainly concerned with safety to persons by specifying the rules and fundamental principles for the maintenance of AGL constant current series circuits; · is not intended to apply to AGL primary series circuits supplied directly from a mains constant voltage source; · is not intended to be used for public street lighting, roadway lighting or any other installation requiring the use of constant current series circuits.

Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits

LST L ENV 50234-2001 航空地面照明电气安装 闪光灯：设备规格和测试

Aeronautical ground lighting electrical installation. Flashing lights: Equipment specifications and tests

LST L ENV 50230-2001 航空地面照明电气安装 控制和监测系统：一般要求

Aeronautical ground lighting electrical installation. Control and monitoring systems: General requirements

LST L ENV 50235-2001 航空地面照明电气安装 标志：设备规格和测试

Aeronautical ground lighting electrical installation. Signs: Equipment specifications and tests

ICAO 9184-2-2002 机场规划手册 第2部分：土地使用和环境控制

Airport Planning Manual - Part 2: Land Use and Environmental Control

MH 5014-2002 民用机场飞行区土(石)方与道面基础施工技术规范

Technical specifications for construction of Earhwork (rockwork) and pavement Foundation for Airfield Area of Civil Airports

MH 5006-2002 民用机场飞行区水泥混凝土道面面层施工技术规范

Technical specifications for construction of cement concrete pavement for airfield area of civil airports

MH 5005-2002 民用机场飞行区排水工程施工技术规范

Technical specifications for construction of drainage engineering for airfield area of civil airports

MH 5062-2000 民用机场旅客航站区无障碍设施设备配置标准

Technical Standards for Airport Passenger Terminal Facilities with Accessibility by Individuals with Disabilities

MH 5002-1999 民用机场总体规划规范

Code for master planning of civil airport

MH 5010-1999 民用机场沥青混凝土道面设计规范

Specifications for asphalt concrete pavement design of civil airports

MH 5011-1999 民用机场沥青混凝土道面施工技术规范

Specifications of asphalt concrete pavcment construction of civil airports