97.060 洗衣设备 标准查询与下载

QB/T 4274-2011 洗衣机进水阀技术条件

本标准规定了洗衣机进水阀（以下简称"进水阀"）的术语和定义、产品分类、要求和试验方法。 本标准适用于在家用和类似用途电动洗衣机上使用，单相额定电压不大于250V,单位通道输入功率小于20W的进水阀。本标准也适用于洗碗机。

Technical conditions for inlet valve of washing machine

LST EN 60456-2011/AC-2011 家用洗衣机 性能测量方法（IEC 60456:2010，已修改）

Clothes washing machines for household use - Methods for measuring the performance (IEC 60456:2010, modified)

LST EN 60456-2011 家用洗衣机 性能测量方法（IEC 60456:2010，已修改）

Clothes washing machines for household use - Methods for measuring the performance (IEC 60456:2010, modified)

BS EN 1458-2:2011 家用B22D和B23D型号的直接燃气滚筒式烘干机,额定热输入不超过6 kW.能源的合理使用

Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW. Rational use of energy

DS/ISO 8232:2011 闭路干洗机 机器特性的定义和检查

Provides suitable methods of checking the solvent consumption, the efficiency of solvent recovery during drying, and the solvent concentrations in the atmosphere surrounding the cited machines. Safety requirements concerning the industrial use of these machines are not included.

Closed-circuit dry-cleaning machines - Defining and checking of machine characteristics

GSO ISO 10472-2:2011 工业洗衣机安全要求 第2部分：洗衣机和脱水机

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washing machines and washer-extractors of all configurations having a net usable cage volume > 60 l. This part of ISO 10472 does not cover particular hazards for drawer-type washer-extractors. This part of ISO 10472 does not cover the hazards caused by processing work which may create an explosive or flammable atmosphere inside the machine. This part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level. This part of ISO 10472 does not apply to ancillary equipment, e.g. chemical supply pumps, steam valves and supply pipe work, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors

GSO ISO 10472-3:2011 工业洗衣机的安全要求 第3部分：包括组件机器的洗涤隧道生产线

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washing tunnel lines including component machines such as: * — continuous tunnel washing machines; * — squeeze presses or centrifugal extraction machines; * — transfer conveyor systems; * — automatic transfer tumblers; * — loading or unloading system interfaces; * — access platform and ladders. This part of ISO 10472 does not cover particular hazards for continuous stand-alone washing lines for endless towels. This part of ISO 10472 does not cover the hazards caused by processing work which may create an explosive or flammable atmosphere inside the machine. This part of ISO 10472 complements the basic requirements laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level. This part of ISO 10472 does not apply to ancillary equipment, e. g. chemical store and supply pumps, steam valves and supply pipework, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines

GSO ISO 10472-1:2011 工业洗衣机安全要求 第1部分：通用要求

The individual parts of ISO 10472 identify all significant hazards associated with laundry machinery designed for use in industrial laundry premises, which includes hotels, hospitals, nursing homes, prisons and similar premises, as well as machines designed for use in self-service establishments subject to the minimum capacities stated in the separate parts of ISO 10472. Dry-cleaning presses and garment presses are also included. Certain specialized finishing machines used for shaped items are excluded. Household and similar electrical appliances (see IEC 335) are not covered by ISO 10472. The individual parts of ISO 10472 complement the basic requirements laid down in ISO/TR 12100-1 and ISO/TR 12100-2. They give guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures to attain the required safety level. "Use of machinery" comprises both intended use and reasonably foreseeable misuse. The individual parts of ISO 10472 do not give specific technical advice about: * — the phases of life of the machine other than use; * — noise; * — laser; * — maintenance operations and elimination of process faults; * — ergonomics; * — explosions; * — isolation of energy sources; * — pressure vessels; * — hot surfaces necessarily exposed for production purposes [but see ISO 10472-6 (press head surface)]. The individual parts of ISO 10472 do not cover electromagnetic compatibility. Hazards due to the use of gas within a machine which is not included in the range described in 5.5.2 of this part of ISO 10472 are not covered by the individual parts of ISO 10472. Examples of layouts of a large- and a medium-size plant which show the machines of parts 2 to 6 of ISO 10472 are given in annex B. The individual parts of ISO 10472 apply to machines which are manufactured after the date of issue of the relevant parts. NOTE — For significant hazards concerned with construction, transport, commissioning, decommissioning, dismantling and disposal of the machine, see ISO/TR 12100-1:1992, 3.11, 3.12 and ISO/TR 12100-2:1992, 5.5. The guidance contained in the individual parts of ISO 10472 is based on the assumption that the designer has completed a risk analysis of the machine under consideration. This will enable him to identify and fulfil the significant requirements for the machine as stipulated by the individual parts of ISO 10472.

Safety requirements for industrial laundry machinery - Part 1: Common requirements

GSO IEC 60311:2011 家用和类似用途电熨斗性能测量方法

IEC 60311:2002+A1:2005+A2:2009(E) States and defines the principal performance characteristics of electric dry irons, steam irons, spray irons,and steam irons with seperate water reservoir or boiler/generator not exceeding 5L in capacity, for household or similar use. This consolidated version consists of the fourth edition (2002), its amendment 1 (2005) and its amendment 2 (2009). Therefore, no need to order amendments in addition to this publication. Technical Committee dition (2002) and its amendment 1 (2005). Therefore, no need to order amendment in addition to this publication.

Electric irons for household or similar use - Methods for measuring performance

GSO ISO 10472-5:2011 工业洗衣机安全要求 第5部分：熨烫机、送料机和折叠机

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with flatwork ironers, feeders and folders, such as: * — cylinder and bed ironers for flatwork finishing having a contact area (for bed ironers under pressure) > 0,25 m2; * — flatwork feeding machines for the automatic feeding of flatwork into bed or cylinder ironers, or directly to folders; * — flatwork folding machines for the automatic folding of flatwork in association with cylinder and bed ironers; * — folding machines for the automatic folding of small pieces (excluding endless towels); * — multi-function machines. This part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level. This part of ISO 10472 does not apply to ancillary equipment, e. g chemical supply pumps, steam valves and supply pipe work, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders

GSO ISO 10472-4:2011 工业洗衣机械安全要求 第4部分：空气干燥机

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with air dryers, and in particular with tumble dryers having a net usable cage volume > 160 l and tunnel finishers including associated conveyors and cabinet dryers. This part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level. This part of ISO 10472 does not apply to ancillary equipment.

Safety requirements for industrial laundry machinery - Part 4: Air dryers

DS/EN 60456/AC:2011 家用洗衣机 性能测量方法

IEC 60456:2010(E) specifies methods for measuring the performance of clothes washing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washer-dryers) with respect to their washing related functions. This International Standard also covers washing machines which specify the use of no detergent for normal use. This edition includes the following significant changes from the previous edition. Modified test load mass requirement for cases where: - rated c

Clothes washing machines for household use - Methods for measuring the performance

BS EN 60456:2011 家庭用洗衣机.性能测量方法

Clothes washing machines for household use. Methods for measuring the performance

DS/EN 60335-2-7:2011 家用和类似用途电器 安全 第 2-7 部分：洗衣机的特殊要求

This Standard deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase washing machines and 480 V for other washing machines, in this standard generally referred to as appliances.This standard also deals with the safety of electric washing machines for household and similar use employing an electrolyte instead of detergent. Additional requirements for these appliances are given in Annex CC.Appliances not designed for normal household use but which nevertheless may be a source of danger to the public, such as appliances

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

IEC 60456:2010/COR1:2011 家用洗衣机性能测量方法

Clothes washing machines for household use - Methods for measuring the performance

DS/EN 60456:2011 家用洗衣机 性能测量方法

This International Standard specifies methods for measuring the performance of clotheswashing machines for household use, with or without heating devices utilising cold and/or hot water supply. It also deals with appliances for water extraction by centrifugal force (spin extractors) and is applicable to appliances for both washing and drying textiles (washerdryers) with respect to their washing related functions. This International Standard also covers washing machines which specify the use of no detergent for normal use.NOTE 1 Tumble dryer performance is assessed to IEC 61121.The object is to state and define the principal performance characteristics of el

Clothes washing machines for household use - Methods for measuring the performance

IEC 60335-2-44:2002/AMD2:2011 修改件2.家用和类似用途电器.安全.第2-44部分:熨斗的特殊要求

Amendment 2 - Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers

DIN EN 60335-2-3:2011 家用和类似用途的电器.安全.第2-3部分:熨斗的特殊要求(IEC 60335-2-3-2002 + Cor.-2002 + A1-2004 + A2-2008);德文版本EN 60335-2-3-2002 + A1-2005 + A2-2008 + A11-2010

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons (IEC 60335-2-3:2002 + Cor. :2002 + A1:2004 + A2:2008); German version EN 60335-2-3:2002 + A1:2005 + A2:2008 + A11:2010

DIN EN 60335-2-11:2011 家用和类似用途电器.安全性.第2-11部分:滚筒式烘干机的详细要求(IEC 60335-2-11-2008,修改).德文版本EN 60335-2-11-2010

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2008, modified); German version EN 60335-2-11:2010

UL 141-2011 衣服熨烫设备

UL Standard for Safety Garment Finishing Appliances (Ninth Edition; Reprint with revisions through and including September 27, 2011)