97.120 家用自动控制装置 标准查询与下载

KS C IEC 60730-2-15:2020 自动电气控制.第2-15部分:自动电气空气流量、水流和水位传感控制的特殊要求

Automatic electrical controls —Part 2-15: Particular requirements for automatic electrical air flow,water flow and water level sensing controls

T/CAS 417-2020 电热水器智能交互等级评价规范

本标准规定了家用和类似用途储水式电热水器的智能交互等级评价方式和检测试验方法。

Specification for intelligent interaction grade evaluation of electrical water heater

BS EN IEC 60730-2-11:2020 自动电气控制 能量调节器的特殊要求

What is BS EN IEC 60730-2-11 about? BS EN IEC 60730-2-11 specifies essential safety, operational and safety requirements for energy regulators for use in, on, or in association with equipment, such as heating, air conditioning, and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. Note 1: BS EN IEC 60730-2-11 applies to the inherent safety, to the operating values, operating times, and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipmen t. Note 2: BS EN IEC 60730-2-11 applicable to energy regulators for appliances. Note 3: BS EN IEC 60730-2-11 applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms, and commercial and industrial applications. Note 4: BS EN IEC 60730-2-11 does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard. Note 5: BS EN IEC 60730-2-11 does not apply to equipment that is specifically within the scope of building automation equipment. Note 6: BS EN IEC 60730-2-11 is applicable to individual energy regulators utilized as a part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs. Note 7: BS EN IEC 60730-2-11 applies to controls using thermistors. Note 8...

Automatic electrical controls - Particular requirements for energy regulators

BS EN 60730-2-6:2016+A1:2020 自动电气控制 自动电气压力传感控制的特殊要求 包括机械要求

1   Scope and normative references This clause of Part 1 is applicable except as follows: 1.1   Scope Replacement: This part of IEC 60730 applies to automatic electrical pressure sensing controls for use in, on or in association with, equipment. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. NOTE Throughout this standard, the word “equipment” includes “appliances” and “control system”. This standard is also applicable to individual pressure sensing controls utilized as part of a control system or pressure sensing controls which are mechanically integral with multi-functional controls having non-electrical outputs. Automatic electrical pressure sensing controls for equipment used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to pressure sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. 1.1.1    Replacement : This standard applies to inherent safety, operating values, operating sequences where such ...

Automatic electrical controls - Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

EN IEC 60730-2-11:2020 自动电气控制 第 2-11 部分：能量调节器的特殊要求

IEC 60730-2-11:2019 is available as IEC 60730-2-11:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60730-2-11:2019 applies to energy regulators for use in, on, or in association with equipment, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard applies to the inherent safety, to the operating values, operating times and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipment. This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1. Throughout this standard the word “equipment” means “appliance and equipment”. This standard also applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard. This standard does not apply to equipment that are specifically within the scope of building automation equipment. This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs. This standard applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision to the title to remove “for household and similar use”; b) changes to the scope and related modifications; c) changes to definitions in Annex H. This Part 2-11 is intended to be used in conjunction with IEC 60730 1. It was established on the basis of the fifth edition of that standard (2013) including Amendment 1 (2015). Consideration may be given to future editions of, or amendments to, IEC 60730-1. Keywords: Automatic Controls, Energy Regulators, Control Systems

Automatic electrical controls - Part 2-11: Particular requirements for energy regulators

EN IEC 60730-2-8:2020 家用和类似用途的自动电气控制 第 2-8 部分：电动水阀的特殊要求，包括机械要求

NEW! IEC 60730-2-8:2018 is available as IEC 60730-2-8:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60730-2-8:2018 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use, including heating, air-conditioning and similar applications. The equipment can use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This document is applicable to electrically operated water valves for building automation within the scope of ISO 16484. This document also applies to automatic electrically operated water valves for equipment that can be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This document does not apply to electrically operated water valves intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This document applies to electrically operated water valves powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V. This document does not cover the prevention of contamination of drinking water as a result of contact with materials. This document applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical control devices used in, on or in association with, household and similar equipment. This document contains requirements for electrical features of water valves and requirements for mechanical features of valves that affect their intended operation. This document is also applicable to electrically operated water valves for appliances within the scope of the IEC 60335 series of standards. This document does not apply to: - electrically operated water valves of nominal connection size above DN 50; - electrically operated water valves for admissible nominal pressure rating above 1,6 MPa; - food dispensers; - detergent dispensers; - steam valves; - electrically operated water valves designed exclusively for industrial applications. This document applies to electrically operated water valves, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof. This document also applies to actuators and to valve bodies which are designed to be fitted to each other. This document applies to individual valves, valves utilized as part of a system and valves mechanically integral with multi-functional controls having non-electrical outputs. This document applies to AC or DC powered electrically operated water valves with a rated voltage not exceeding 690 V AC or 600 V DC. This document does not take into account the response value of an automatic action of a valve, if such a response value is dependent upon the method of mounting the valve in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply. This document applies also to electrically operated water valves incorporating electronic devices, requirements for which are contained in

Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

EN IEC 60730-2-7:2020 自动电气控制 第 2-7 部分：定时器和时间开关的特殊要求

IEC 60730-2-7:2015(E) applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or timers which are mechanically integral with multifunctional controls having non-electrical outputs. This standard does not apply to time-delay switches (TDS) within the scope of IEC 60669-2-3. This standard applies to the inherent safety, to the operating characteristics where such are associated with equipment protection and to the testing of timers used in appliances and other apparatus, electrical and non-electrical, for household and similar purposes, but also extended to industrial purposes when no dedicated product standards exist, such as that for central heating, air conditioning, process heating, etc. Timers for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This third edition cancels and replaces the second edition published in 2008. This third edition constitutes a technical revision. This new edition revises the compliance criteria of type 1.S and 2.S action, revises the requirements for filament lamp loads, adds requirements for abnormal operation in Annex H, removes some special requirements for single countries as well as updates the standard to IEC 60730-1:2010, fourth edition. Key words: Timers, Time Switches

Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches

BS EN 50491-11:2015+A1:2020 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 智能计量的一般要求 应用规范 简单的外部消费显示器

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart Metering. Application Specifications. Simple External Consumer Display

IEC 60730-2-9:2015/AMD2:2020 电气自动控制.第2-9部分:温度传感控制的特殊要求

Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control

IEC 60730-2-9:2015+AMD1:2018+AMD2:2020 CSV 电气自动控制.第2-9部分:温度传感控制的特殊要求

Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control

IEC 60730-1:2013/AMD2:2020 电气自动控制.第1部分:一般要求

Automatic electrical controls - Part 1: General requirements

IEC 60730-1:2013+AMD1:2015+AMD2:2020 CSV 电气自动控制.第1部分:一般要求

Automatic electrical controls - Part 1: General requirements

T/CAS 354.4-2020 基于大数据的智慧家庭服务平台 评价技术规范 第4部分：智慧卧室

本部分规定了基于大数据实现智慧家庭服务平台中智慧卧室场景的结构模型、评价指标体系、功能要求、评价方法、评价规则及等级。 本部分适用于基于大数据实现智慧家庭服务平台中智慧卧室场景的评价。

Evaluation technical specification for smart home service platform based on big data Part 4: Smart bedroom

T/CAS 393-2020 智能售货机智能水平评价技术规范

本标准规定了智能售货机（以下简称器具）智能化的评价指标体系及功能要求、评价方法、评价规则和等级。

Technical specification for evaluation of intelligent level of smart vending machine

BS EN IEC 60730-2-22:2020 自动电气控制 热电机保护器的特殊要求

What is BS EN IEC 60730-2-22 about? BS EN IEC 60730-2-22 discusses thermal motor protectors. BS EN IEC 60730-2-2 specifies requirements for thermal motor protector which is used in households and similar appliances like heating, air conditioning. Note 1: BS EN IEC 60730-2-22 applies to the partial evaluation of thermal motor protectors for household and similar use, including heating, air conditioning, and similar applications as well as for sealed (hermetic and semi-hermetic type) motor compressors. Note 2: A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. This dependency is illustrated by: The ability of the thermal motor protector to accurately and reliably sense the heat of the motor windings thus addressing the over-temperature protection due to motor overload conditions The ability of the thermal motor protector to sense accurately and reliably the current due to motor locked rotor conditions; thus, reducing the response time and not being adversely affected by heat-sink at the assembly spot in the application The influence of the motor’s electromagnetic field on the switch behaviour of the thermal motor protector particularly, affects the arc direction between the contacts resulting in uneven wear of the contact material and eventually leading to failure of the operation. Note 3: BS EN IEC 60730-2-22 applies to thermal motor protectors using NTC or PTC thermistors. Note 4: BS EN IEC 60730-2-22 applies to the inherent safety, to the operating values, operating times, and operating sequences, where such are associated with e...

Automatic electrical controls - Particular requirements for thermal motor protectors

T/CAS 392-2020 智能家居设备无线连接水平评价技术规范

本标准规定了智能家居设备（以下简称设备）无线连接性能相关的评价指标体系、基本要求及评价指标、测试方法和等级评定。

Technical specification for evaluation of wireless connection level of smart home devices

EN IEC 60730-2-22:2020 自动电气控制 第 2-22 部分：热电机保护器的特殊要求

IEC 60730-2-22:2014 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. This dependency is illustrated by: - the ability of the thermal motor protector to accurately and reliably sense the heat of the motor windings; - thus, addressing the over-temperature protection due to motor overload conditions; - the ability of the thermal motor protector to accurately and reliably sense the current due to motor locked-rotor conditions; - thus, reducing the response time and not being adversely affected by heat-sink at the assembly spot in the application and the influence of the motor's electromagnetic field on the switch behaviour of the thermal motor protector; - particularly, affecting the arc direction between the contacts resulting in uneven wear of the contact material and eventually leading to failure of operation. Requirements concerning the testing of the combination of sealed (hermetic and semi-hermetic type) motor-compressors and thermal motor protectors are given in IEC 60335-2-34. This standard applies to thermal motor protectors using NTC or PTC thermistors, additional requirements for which are contained in Annex J. Key words: Thermal, Motor protectors, Integrated control

Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors

T/ZZB 1518-2020 液体膨胀压力式温度计

本标准规定了液体膨胀压力式温度计的术语和定义、分类和命名、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于正常工作环境温度为-20℃～65℃，相对湿度为5 %～95 %，最小分度值≤2 ℃的液体膨胀压力式温度计（以下简称温度计）。

Liquid expansion pressure thermometer

IEC 60730-2-9:2020 家用和类似用途的电气自动控制器.第2-9部分:感温控制器的特殊要求

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

IEC 60730-1:2020 电气自动控制器.第1部分:一般要求

Automatic electrical controls - Part 1: General requirements