97.120 家用自动控制装置 标准查询与下载

IEC 60730-1:2013+AMD1:2015+AMD2:2020 CSV 电气自动控制.第1部分:一般要求

Automatic electrical controls - Part 1: General requirements

T/CAS 393-2020 智能售货机智能水平评价技术规范

本标准规定了智能售货机（以下简称器具）智能化的评价指标体系及功能要求、评价方法、评价规则和等级。

Technical specification for evaluation of intelligent level of smart vending machine

T/CAS 354.4-2020 基于大数据的智慧家庭服务平台 评价技术规范 第4部分：智慧卧室

本部分规定了基于大数据实现智慧家庭服务平台中智慧卧室场景的结构模型、评价指标体系、功能要求、评价方法、评价规则及等级。 本部分适用于基于大数据实现智慧家庭服务平台中智慧卧室场景的评价。

Evaluation technical specification for smart home service platform based on big data Part 4: Smart bedroom

BS EN IEC 60730-2-22:2020 自动电气控制 热电机保护器的特殊要求

What is BS EN IEC 60730-2-22 about? BS EN IEC 60730-2-22 discusses thermal motor protectors. BS EN IEC 60730-2-2 specifies requirements for thermal motor protector which is used in households and similar appliances like heating, air conditioning. Note 1: BS EN IEC 60730-2-22 applies to the partial evaluation of thermal motor protectors for household and similar use, including heating, air conditioning, and similar applications as well as for sealed (hermetic and semi-hermetic type) motor compressors. Note 2: A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. This dependency is illustrated by: The ability of the thermal motor protector to accurately and reliably sense the heat of the motor windings thus addressing the over-temperature protection due to motor overload conditions The ability of the thermal motor protector to sense accurately and reliably the current due to motor locked rotor conditions; thus, reducing the response time and not being adversely affected by heat-sink at the assembly spot in the application The influence of the motor’s electromagnetic field on the switch behaviour of the thermal motor protector particularly, affects the arc direction between the contacts resulting in uneven wear of the contact material and eventually leading to failure of the operation. Note 3: BS EN IEC 60730-2-22 applies to thermal motor protectors using NTC or PTC thermistors. Note 4: BS EN IEC 60730-2-22 applies to the inherent safety, to the operating values, operating times, and operating sequences, where such are associated with e...

Automatic electrical controls - Particular requirements for thermal motor protectors

T/CAS 392-2020 智能家居设备无线连接水平评价技术规范

本标准规定了智能家居设备（以下简称设备）无线连接性能相关的评价指标体系、基本要求及评价指标、测试方法和等级评定。

Technical specification for evaluation of wireless connection level of smart home devices

EN IEC 60730-2-22:2020 自动电气控制 第 2-22 部分：热电机保护器的特殊要求

IEC 60730-2-22:2014 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. This dependency is illustrated by: - the ability of the thermal motor protector to accurately and reliably sense the heat of the motor windings; - thus, addressing the over-temperature protection due to motor overload conditions; - the ability of the thermal motor protector to accurately and reliably sense the current due to motor locked-rotor conditions; - thus, reducing the response time and not being adversely affected by heat-sink at the assembly spot in the application and the influence of the motor's electromagnetic field on the switch behaviour of the thermal motor protector; - particularly, affecting the arc direction between the contacts resulting in uneven wear of the contact material and eventually leading to failure of operation. Requirements concerning the testing of the combination of sealed (hermetic and semi-hermetic type) motor-compressors and thermal motor protectors are given in IEC 60335-2-34. This standard applies to thermal motor protectors using NTC or PTC thermistors, additional requirements for which are contained in Annex J. Key words: Thermal, Motor protectors, Integrated control

Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors

T/ZZB 1518-2020 液体膨胀压力式温度计

本标准规定了液体膨胀压力式温度计的术语和定义、分类和命名、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于正常工作环境温度为-20℃～65℃，相对湿度为5 %～95 %，最小分度值≤2 ℃的液体膨胀压力式温度计（以下简称温度计）。

Liquid expansion pressure thermometer

IEC 60730-1:2020 电气自动控制器.第1部分:一般要求

Automatic electrical controls - Part 1: General requirements

IEC 60730-2-9:2020 家用和类似用途的电气自动控制器.第2-9部分:感温控制器的特殊要求

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

KS C IEC 60730-2-13-2019 自动电气控制 - 第2-13部分:湿度感应控制的特殊要求

Automatic electrical controls — Part 2-13: Particular requirements for humidity sensing controls

KS C IEC 60730-2-13:2019 自动电气控制 - 第2-13部分:湿度感应控制的特殊要求

Automatic electrical controls — Part 2-13: Particular requirements for humidity sensing controls

KS C IEC 60730-2-4-2019 家用和类似用途自动电气控制装置第2 4部分：密闭式和半密闭式电动机压缩机用热保护器的特殊要求

Automatic electrical controls for household and similar use－Part 2－4：Particular requirements for thermal motor protectors for motor－compressors of hermetic and semi-hermetic type

IEC 60730-2-6:2015+AMD1:2019 CSV 电气自动控制第2-6部分:包括机械要求在内的电气压力自动传感控制的特殊要求

Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

IEC 60730-2-6:2015/AMD1:2019 修改件1.自动电气控制装置.第2-6部分:自动电气压力传感控制装置的特殊要求 包括机械要求

Amendment 1 - Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

T/CAS 354.3-2019 基于大数据的智慧家庭服务平台 评价技术规范 第3部分：室内空气环境

本部分规定了基于大数据平台实现智慧家庭中室内空气环境场景的室内空气环境服务平台结构模型、功能评价指标体系及评价规则和评价方法。

Technology specification of evaluation for intelligent family service platform based on big data - part3: Indoor air environment

T/CAS 354.2-2019 基于大数据的智慧家庭服务平台 评价技术规范 第2部分：智慧浴室

本部分规定了基于大数据实现智慧家庭服务平台中智慧浴室场景的结构模型、评价指标体系、评价规则和评价方法。

Technology specification of evaluation for intelligent family service platform based on big data - part2: Smart bathroom

IEC 60730-2-11:2019 电气自动控制.第2-11部分:能量调节器的特殊要求

Automatic electrical controls - Part 2-11: Particular requirements for energy regulators

IEC 60730-2-11:2019 RLV 电气自动控制.第2-11部分:能量调节器的特殊要求

Automatic electrical controls - Part 2-11: Particular requirements for energy regulators

BS EN IEC 60730-2-15:2019 自动电气控制 自动电动气流、水流和水位传感控制的特殊要求

What is IEC 60730-2-1 - Requirements for automatic air control 5 about?   IEC 60730-2-15 applies to automatic electrical air flow, water flow, and water level   sensing controls for use in, or in association with, boilers with a maximum pressure rating of   2 000 kPA (20 bar) and equipment for general household and similar use including controls   for heating, air-conditioning, and similar applications.   Note 1:  IEC 60730-2-15 is not applicable to pressure sensing controls, requirements.  Note 2: Examples are water flow and water level sensing controls of the float or electrode-sensor type used in boile...

Automatic electrical controls. Particular requirements for automatic electrical air flow, water flow and water level sensing controls

BS EN IEC 60730-2-12:2019 自动电气控制 电动门锁的特殊要求

What is BS EN IEC 60730-2-12- E lectrically operated door locks about?   BS EN IEC 60730-2-12 applies to the inherent safety, to the operating values, operating sequences where such are associated with equipment protection, and to the testing of door locks used in association with equipment.   BS EN IEC 60730-2-12 applies to electrically operated door locks for use in, on or in association with equipment, including equipment for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. BS EN IEC 60730-2-12 also applies to electrically operated door locks for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications.   Note 1: BS EN IEC 60730-2-12 does not apply to electrically operated door locks intended exclusively for industrial process applications unless explicitly mentioned in the equipment standard.  Note 2: ...

Automatic electrical controls. Particular requirements for electrically operated door locks