97.120 家用自动控制装置 标准查询与下载

BS EN IEC 60730-2-9:2019+A1:2019 自动电气控制 - 温度传感控制的特殊要求

What is BS EN IEC 60730-2-9 about? BS EN IEC 60730-2-9 discusses on Automatic electrical controls. BS EN IEC 60730-2-9 is the part two of the multi edition standard on requirements for temperature sensing controls of automatic electrical controls which is applicable to the functional safety of low complexity safety-related temperature sensing controls and systems. BS EN IEC 60730-2-9 applies to automatic electrical temperature sensing controls for use in association with equipment including electrical controls for heating, air-conditioning and similar applications. Note: BS EN IEC 60730-2-9 does not apply to automatic electrical temperature sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. Who is BS EN IEC 60730-2-9 for? BS EN IEC 60730-2-9 is on requirements for temperature sensing controls of automatic electrical controls applies to: Electrical appliances manufacturers Temperature sensing control devices manufacturers Why should you use BS EN IEC 60730-2-9 ? Temperature sensors are used in diverse applications such as food processing, HVAC environmental control, medical devices, chemical handling and automotive under the hood monitoring. Temperature sensors tend to measure heat to ensure that a process is either, staying within a certain range, providing safe use of that application, or meeting a mandatory condition when dealing with extreme heat, hazards, or inaccessible measuring points. BS EN IEC 60730-2-9 provides requirements for temperature sensor...

Automatic electrical controls - Particular requirements for temperature sensing controls

IEC 60730-2-14:2017+AMD1:2019 CSV 电气自动控制.第2-14部分:电动执行机构的特殊要求

Automatic electrical controls - Part 2-14: Particular requirements for electric actuators

IEC 60730-2-14:2017/AMD1:2019 电气自动控制.第2-14部分:电动执行机构的特殊要求

Automatic electrical controls - Part 2-14: Particular requirements for electric actuators

T/ZZB 0960-2019 时控开关

本标准规定了时控开关的术语和定义、基本要求、分类、特性、产品的有关数据和资料、正常的使用、安装和运输条件、结构和性能要求、试验、包装和质量承诺。 本标准适用于频率50 Hz或60 Hz，额定控制电源电压不超过交流440 V的时控开关。 本标准规定的时控开关用来作为自动控制电路中设备的的定时接通和断开控制之用。

Time switch

T/ZZB 0982-2019 全封闭电动机-压缩机用外置式 圆形热保护器

本标准规定了全封闭电动机－压缩机用外置式圆形热保护器的型号与基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存及质量承诺。 本标准适用于安装在家用和类似用途的全封闭电动机－压缩机外壳表面的电流－温度型自动复位式圆形热保护器（以下简称“保护器”）。

External circular thermal overload protectors for hermetic motor compressors

T/ZZB 0954-2019 螺纹夹紧型接线端子架

本标准规定了螺纹夹紧型接线端子架的术语和定义、基本要求、产品分类、技术要求、试验方法、标志、包装、运输及贮存和质量承诺。 本标准适用于内宽为4 mm～6 mm、内高为4.5 mm～8 mm，以及壁厚为0.8 mm和1 mm的螺纹夹紧型接线端子架（以下简称接线端子架）。 本标准适用于接线端子内电气固定连接用的接线端子架。

Thread clamping terminal

EN IEC 60730-2-9:2019 自动电气控制 第 2-9 部分：温度传感控制的特殊要求

IEC 60730-2-9:2015(E) is available as IEC 60730-2-9:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60730-2-9:2015(E) applies to automatic electrical temperature sensing controls for use in, on or in association with equipment, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to automatic electrical temperature sensing controls forming part of a building automation control system within the scope of ISO 16484. This standard also applies to automatic electrical temperature sensing controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to automatic electrical temperature sensing controls intended exclusively for industrial process applications, unless explicitly mentioned in the relevant equipment standard. This standard applies to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical temperature sensing control devices used in, or in association with, equipment. This standard is also applicable to the functional safety of low complexity safety-related temperature sensing controls and systems. This fourth edition cancels and replaces the third edition published in 2008, and its Amendment 1:2011. This edition constitutes a technical revision. This edition includes alignment with the text of 60730-1 fifth edition and the following significant technical changes with respect to the previous edition: - modification of heating-freezing tests in Clause 12; - alignment of the EMC requirements in H.26 to those in other part 2 standards and - addition of requirements in Clause H.27 to cover class B and C control functions of temperature sensing controls. Key words: Controls, Temperature Sensing

Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control.

T/ZZB 0926-2019 家用燃气快速热水器

本标准规定了家用燃气快速热水器(以下简称热水器)的术语和定义、分类及型号、基本要求、技术要求、试验方法、检验规则、标志、安装、包装、运输、贮存和质量承诺。 本标准适用于额定热负荷不大于70 kW，具有自动恒温功能的强制排气式、强制给排气式、室外型的热水器。 本标准所指燃气是 GB/T 13611—2006 中的燃气，使用 GB/T 13611—2006 规定以外的燃气时，试验用燃气按产品设计提供的燃气进行，压力范围参照 GB/T 13611—2006 的有关规定。 本标准不适用于燃气容积式热水器。 本标准不适用于供暖、两用热水器。 本标准不适用于冷凝式热水器。

Domestic gas instantaneous water heater

T/CNHA 1014-2018 绿色设计产品评价技术规范 家用燃气快速热水器

 本标准规定了家用燃气快速热水器（以下简称燃气热水器）绿色设计产品的评价要求、生命周期评价报告编制方法和评价方法。      本标准适用于家用燃气快速热水器绿色设计产品评价。

Technical specification for green-design product assesment Domestic gas intantaneous water heater

DIN EN 50631-1:2018 家用电器网络和电网连接 第1部分：一般要求、通用数据建模和中性消息；德文版 EN 50631-1:2017

This document defines data models for Interoperable Connected Household Appliances. The data model is derived from a logical decomposition of use cases into functional blocks that themselves are realized by abstract actions on the data model itself.

Household appliances network and grid connectivity - Part 1: General Requirements, Generic Data Modelling and Neutral Messages; German version EN 50631-1:2017

NB/T 10094-2018 能量调节器

energy regulator

NB/T 10095-2018 液体膨胀压力式温度计

Liquid expansion pressure thermometer

NB/T 10093-2018 压力式温控器及温度计用毛细管

Capillary tubes for pressure thermostats and thermometers

T/ZZB 0620-2018 小型全封闭制冷电动机——压缩机用外置式扁形热保护器

本标准规定了小型全封闭制冷电动机-压缩机用外置式扁型热保护器（以下简称扁型热保护器）的术语和定义、基本要求、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本标准适用于安装在家用和类似用途的制冷器具用小型全封闭制冷电动机-压缩机外壳表面的扁型热保护器。

External flat overload protectors for minitype hermetic refrigeration motor-compressors

DB13/T 2824-2018 脚踏活塞式节水型坐便器通用技术要求

General technical requirements for pedal piston water-saving toilet

IEC 60730-2-8:2018 RLV 电气自动控制.第2-8部分:电动水阀的特殊要求 包括机械要求

Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

BS EN 50491-12-1:2018 家用和建筑电子系统（HBES）以及建筑自动化和控制系统（BACS）的一般要求 智能电网 应用规范 面向客户的接口和框架 CEM与住宅/建筑资源管理器之间的接口

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). Smart grid. Application specification. Interface and framework for customer. Interface between the CEM and Home/Building Resource mana

IEC 60730-2-8:2018 自动电气控制 第 2-8 部分：电动水阀的特殊要求，包括机械要求

Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

EN 50491-12-1:2018 家庭和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS）的一般要求 智能电网 应用规范 客户接口和框架 第 12-1 部分：CEM 和家庭/建筑物之间的接口

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customer - Part 12-1: Interface between the CEM and Home/Buildin

BS EN IEC 60730-2-13:2018 自动电气控制 湿度传感控制的特殊要求

What is BS EN IEC 60730-2-13 - Requirements for humidity sensing controls about?    BS EN IEC 60730-2-13 applies to automatic electrical humidity sensing controls for use in, on   or in association with equipment, including controls for heating, air-conditioning and similar   applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc.   or a combination thereof.   BS EN IEC 60730-2-13 International Standard is applicable to automatic electrical humidity sensing controls forming part of a building automation control system within the scope of ISO 16484

Automatic electrical controls. Particular requirements for humidity sensing controls