97.120 家用自动控制装置 标准查询与下载

LST EN 60730-2-5-2015 电自动控制器. 第2-5部分: 电自动燃烧器控制器系统的特殊要求(IEC 60730-2-5-2013, 修改件)

Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems (IEC 60730-2-5:2013, modified)

EN 50491-11:2015 家庭和楼宇电子系统（HBES）和楼宇自动化和控制系统（BACS）的一般要求 第11部分：智能计量 应用规范 简单的外部消费显示器

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 11: Smart Metering - Application Specifications - Simple External Consumer Display

IEC 60730-2-9:2015 自动电气控制.第2-9部分:温度敏感控制器的详细要求

"This part of IEC 60730 applies to automatic electrical temperature sensing controls for use in@ on or in association with equipment@ including electrical controls for heating@ air-conditioning and similar applications. The equipment may use electricity@ gas@ oil@ solid fuel@ solar thermal energy@ etc.@ or a combination thereof. NOTE Throughout this standard@ the word ""equipment"" includes ""appliance"" and ""control system"". This standard is applicable to automatic electrical temperature sensing controls forming part of a building automation control system within the scope of ISO 16484. This standard also applies to automatic electrical temperature sensing controls for equipment that may be used by the public@ such as equipment intended to be used in shops@ offices@ hospitals@ farms and commercial and industrial applications. This standard does not apply to automatic electrical temperature sensing controls intended exclusively for industrial process applications@ unless explicitly mentioned in the relevant equipment standard. This standard applies to the inherent safety@ to the operating values@ operating times@ and operating sequences where such are associated with equipment safety@ and to the testing of automatic electrical temperature sensing control devices used in@ or in association with@ equipment. NOTE Examples of such controls include boiler thermostats@ fan controls@ temperature limiters and thermal cut-outs. This standard is also applicable to the functional safety of low complexity safety-related temperature sensing controls and systems. This standard also applies to the electrical safety of temperature sensing controls with nonelectrical outputs such as refrigerant flow and gas controls. This standard applies to manual controls when such are electrically and/or mechanically integral with automatic temperature sensing controls. NOTE Requirements for manual switches not forming part of an automatic control are contained in IEC 61058-1. This standard applies to a.c. or d.c. powered temperature sensing controls with a rated voltage not exceeding 690 V a.c. or 600 V d.c. This standard does not take into account the response value of an automatic action of a temperature sensing control@ if such a response value is dependent upon the method of mounting it in the equipment. Where a response value is of significant purpose for the protection of the user@ or surroundings@ the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply. This standard applies also to temperature sensing controls incorporating electronic devices@ requirements for which are contained in Annex H and to temperature sensing controls using NTC thermistors or PTC thermistors@ requirements for which are contained in Annex J. This standard applies to single operation devices as defined in this standard."

Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls

BS EN 60730-2-5:2015 自动电气控制装置.自动电器燃烧器控制系统的详细要求

Automatic electrical controls. Particular requirements for automatic electrical burner control systems

DB44/T 1590-2015 悬挂式电动晾衣机（架）

本标准规定了悬挂式电动晾衣机（架）的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于家用和类似用途的额定电压不超过250V的通过电动机驱动的悬挂式晾衣机（架）产品。 本标准不适用于安装在户外或使用时伸到户外的电动晾衣机（架）。

Hanging Electric Clothes Dryer (Rack)

GSO IEC 60730-1:2015 自动电气控制装置 第1部分：一般要求

IEC 60730-1:2013 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to controls for building automation within the scope of ISO 16484. This standard also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non electrical outputs. This standard is also applicable to relays when used as controls for IEC 60335 appliances. Additional requirements for the safety and operating values of relays when used as controls for IEC 60335 appliances are contained in Annex U. This standard does not apply to automatic electrical controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. This fifth edition cancels and replaces the fourth edition published in 2010. It constitutes a technical revision. The major changes with respect to the previous edition are as follows: - modification of the title and scope; - revisions to Clause H.26 based on changes in technology, applications, and to improve consistency and layout; - modification to Table H.12 to align with CISPR 22; - revisions to Annex J to correlate the fault modes of thermistors and to exempt thermistors used in conjunction with type 1 controls in SELV low power circuits from the tests specified in Annex J; - new requirements covering battery-powered controls, and the use of batteries in controls; - revision addressing the exclusion of relay faults; - new/updated requirements in Clause 24, for switch mode power supplies; - revisions covering the allowance of screwless-type clamping units complying with IEC 60999-1; - new requirements addressing remotely actuated control functions; - addition of a new/updated leakage current diagram to align the Annex E diagram with the diagram in IEC 60990 and updated requirements for temperature sensing controls. Key words: controls, electrical controls, automatic The contents of the corrigendum of September 2014 have been included in this copy.

Automatic electrical controls - Part 1: General requirements

GSO IEC 60730-2-19:2015 家用和类似用途自动电气控制装置 第2-19部分：电动油阀的特殊要求 包括机械要求

This part 2 of IEC 60730 applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use electricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc. This part 2 also applies to electrically operated oil valves using NTC or PTC thermistors, requirements for which are contained in annex J. This consolidated version consists of the first edition (1997), its amendment 1 (2000) and its amendment 2 (2007). Therefore, no need to order amendments in addition to this publication.

Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves including mechanical requirements

GSO IEC 60730-2-9:2015 家用和类似用途自动电气控制装置 第2部分 9：热传感控制装置的具体要求

IEC 60730-2-9:2008+A1:2011 applies to automatic electrical temperature sensing controls for use in, on or in association with equipment for household and similar use, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This third edition cancels and replaces the second edition published in 2000, its Amendment 1 (2002) and Amendment 2 (2004) and constitutes a technical revision. This edition of IEC 60730-2-9 contains a new Annex EE, which is an informative guide to the application of temperature sensing controls. Additionally, a new requirement to 17.3.1 (there is an error in the FDIS document - 17.7.3 should be 17.3.1) was added to address the endurance requirement for temperature sensing devices where the whole control is declared as the sensing element for ambient temperatures below 0 °C. This document contains also some editorial changes due to new editions of referenced standards. This publication is to be read in conjunction with IEC 60730-1:2010. Consideration may be given to future editions of, or amendments to, IEC 60730-1. This consolidated version consists of the third edition (2008) and its amendment 1 (2011). Therefore, no need to order amendment in addition to this publication.

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

GSO IEC 60730-2-5:2015 自动电气控制 第2-5部分：自动电气燃烧器控制系统的特殊要求

IEC 60730-2-5:2013 applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles for household and similar use including heating, air conditioning and similar use. This part 2-5 is applicable to a complete burner control system and to a separate programming unit. This part 2-5 is also applicable to a separate electronic high-voltage ignition source and to a separate flame detector. Separate ignition devices (electrodes, pilot burners, etc.) are not covered by this part 2-5 unless they are submitted as part of a burner control system. Requirements for separate ignition transformers are contained in IEC 60989. Systems utilizing thermoelectric flame supervision are not covered by this part 2-5. This part 2-5 applies to the inherent safety, to the manufacturer's declared operating values, operating times and operating sequences where such are associated with burner safety and to the testing of automatic electrical burner control systems used in, on, or in association with, burners. It was established on the basis of the fourth edition (2010) of that publication. Consideration may be given to future editions of, or amendments to, IEC 60730-1. The title of IEC 60730-2-5 Ed4.0 has been updated to the title of IEC 60730-1 Ed5.0. However, IEC 60730-2-5 Ed4.0 has not been updated in accordance with the technical requirements in IEC 60730-1 Ed5.0. This part 2-5 supplements or modifies the corresponding clauses in IEC 60730-1 so as to convert that publication into the IEC standard: Safety requirements for automatic electrical burner control systems. Key words: Automatic control, Burner control This publication is to be read in conjunction with IEC 60730-1:2013.

Automatic electrical controls – Part 2-5: Particular requirements for automatic electrical burner control systems

GSO IEC 60730-2-12:2015 家用和类似用途自动电气控制装置 第2部分 12：电动门锁的特殊要求

IEC 60730-2-12:2015(E) applies to electrically operated door locks for use in, on or in association with equipment, including equipment for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard also applies to electrically operated door locks for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to electrically operated door locks intended exclusively for industrial process applications unless explicitly mentioned in the equipment standard. This standard does not apply to electrically operated door locks intended for security access applications. It was established on the basis of the fifth edition (2013) of that publication. Consideration may be given to future editions of, or amendments to, IEC 60730-1. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - aligns the text with IEC 60730-1, Edition 5; - modifies requirements for Class B control function (H.27.1.2.2); - modifies requirements for Class C control function (H.27.1.2.3) and - modifies requirements for faults during safety shut-down. Key words: Locks, Door Locks, Control Systems This publication is to be read in conjunction with IEC 60730-1:2013.

Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks

GSO IEC 60730-2-13:2015 家用和类似用途自动电气控制装置 第2-13部分：湿度的特殊要求

This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.

Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity

GSO IEC 60730-2-10:2015 家用和类似用途自动电气控制装置 第2部分 10：电动机启动继电器的特殊要求

This part of IEC 60730 applies to controls for automatically controlling the starting windings of single phase motors associated with equipment for household and similar use. This standard applies to motor-starting relays using NTC or PTC thermistors, additional requirements for which are contained in Annex J.

Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays

GSO IEC 60730-2-7:2015 自动电气控制装置 第2-7部分：定时器和定时开关的特殊要求

IEC 60730-2-7:2015(E) applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or timers which are mechanically integral with multifunctional controls having non-electrical outputs. This standard does not apply to time-delay switches (TDS) within the scope of IEC 60669-2-3. This standard applies to the inherent safety, to the operating characteristics where such are associated with equipment protection and to the testing of timers used in appliances and other apparatus, electrical and non-electrical, for household and similar purposes, but also extended to industrial purposes when no dedicated product standards exist, such as that for central heating, air conditioning, process heating, etc. Timers for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This third edition cancels and replaces the second edition published in 2008. This third edition constitutes a technical revision. This new edition revises the compliance criteria of type 1.S and 2.S action, revises the requirements for filament lamp loads, adds requirements for abnormal operation in Annex H, removes some special requirements for single countries as well as updates the standard to IEC 60730-1:2010, fourth edition. Key words: Timers, Time Switches

Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches

GSO IEC 60730-2-8:2015 家用和类似用途自动电气控制装置 第2-8部分：电动水阀的具体要求 包括机械要求

Applies to electrically operated water valves for use in, or in association with, equipment for household and similar use (for applications such as heating, air conditioning and similar). Specifies requirements for electrical features of water valves and for mechanical features that affect their intended operation. Applies to the inherent safety, to the operating valves and to the testing of these automatic electrical controls. This consolidated version consists of the second edition (2000) and its amendment 1 (2002). Therefore, no need to order amendment in addition to this publication.

Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves including mechanical requirements

GSO IEC 60730-2-11:2015 家用和类似用途自动电气控制装置 第2-11部分：能源调节器的特殊要求

In general, this part of IEC 60730 applies to energy regulators for use in, on, or in association with equipment for household and similar use, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.

Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators

GSO IEC 60730-2-17:2015 家用和类似用途自动电气控制装置 第2部分 17：电动燃气阀的特殊要求 包括机械要求

This part 2 of IEC 60730 applies to electrically operated gas valves for use in, on or in association with, equipment for household and similar use that use electricity, in combination with fuel in the gaseous state such as manufactured gas, natural gas or liquefied petroleum gas intended to be used for gas burning equipment. This consolidated version consists of the first edition (1997), its amendment 1 (2000) and its amendment 2 (2007). Therefore, no need to order amendments in addition to this publication.

Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves including mechanical requirements

GSO IEC 60730-2-4:2015 家用和类似用途自动电气控制装置 第2-4部分：封闭式和半封闭式电动机 压缩机组合用热保护装置的特殊要求

This part of IEC 60730 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is an integrated control which is dependent on its correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. Requirements concerning the testing of the combination of motor and thermal motor protectors are given in IEC 60335-2-34. This standard applies to thermal motor protectors for motor compressors using NTC or PTC thermistors, additional requirements for which are contained in Annex J.

Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

GSO IEC 60730-2-6:2015 家用和类似用途的自动电气控制装置 第2-6部分：压敏自动电气控制装置的要求 包括机械要求

IEC 60730-2-6:2015(E) applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard is also applicable to individual pressure sensing controls utilized as part of a control system or pressure sensing controls which are mechanically integral with multi-functional controls having non-electrical outputs. Automatic electrical pressure sensing controls for equipment used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to pressure sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This standard applies to inherent safety, operating values, operating sequences where such are associated with equipment protection, and to the testing of automatic electrical pressure sensing controls used in, on or in association with equipment. This standard is also applicable to the functional safety of low complexity safety related pressure sensing controls and systems. This standard is also applicable to pressure sensing controls for appliances within the scope of IEC 60335-1. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - aligns the text with IEC 60730-1, Edition 5; - modifies requirements for Class B control function (H.27.1.2.2); - modifies requirements for Class C control function (H.27.1.2.3) and - modifies requirements for faults during lock-out or safety- shut-down. Key words: sensing controls, control systems, pressure sensing

Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

GSO IEC 60730-2-15:2015 家用和类似用途自动电气控制装置 第2-15部分：自动电气气流、水流和水位传感控制装置的特殊要求

This part of IEC 60730 applies to automatic electrical air flow, water flow and water level sensing controls for use in, or in association with, boilers with a maximum pressure rating of 2 000 kPA (20 bar) and equipment for general household and similar use including controls for heating, air- conditioning and similar applications. This second edition cancels and replaces the first edition published in 1994 and its Amendment 1 (1997), the first edition of IEC 60730-2-16 published in 1995 and its Amendments 1 (1997) and 2 (2001) and the first edition of IEC 60730-2-18 published in 1997. This second edition constitutes a technical revision. This second edition is a consolidation of three standards IEC 60725-2-15, IEC 60730-2-16 and IEC 60730-2-18. The title and scope were revised to reflect the additional topics covered by the standard.

Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls

IEC 60730-2-6:2015 自动电气控制器.第2-6部分:包括机械要求的自动电气压力敏感控制器的特殊要求

"This part of IEC 60730 applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of ?C60 kPa and a maximum gauge pressure rating of 4@2 MPa@ for use in@ on or in association with@ equipment. The equipment may use electricity@ gas@ oil@ solid fuel@ solar thermal energy@ etc. or a combination thereof. NOTE Throughout this standard@ the word ""equipment"" includes ""appliances"" and ""control system"". This standard is also applicable to individual pressure sensing controls utilized as part of a control system or pressure sensing controls which are mechanically integral with multifunctional controls having non-electrical outputs. Automatic electrical pressure sensing controls for equipment used by the public@ such as equipment intended to be used by laymen in shops@ in light industry and on farms@ are within the scope of this standard. This standard does not apply to pressure sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This standard applies to inherent safety@ operating values@ operating sequences where such are associated with equipment protection@ and to the testing of automatic electrical pressure sensing controls used in@ on or in association with equipment. This standard is also applicable to the functional safety of low complexity safety related pressure sensing controls and systems. This standard is also applicable to pressure sensing controls for appliances within the scope of IEC 60335-1. This standard applies to automatic electrical controls@ mechanically or electrically operated@ responsive to or controlling a pressure or vacuum. This standard applies to manual controls when such are electrically and/or mechanically integral with pressure sensing controls. NOTE Requirements for manual switches not forming part of an automatic control are contained in IEC 61058-1. This standard applies to a.c. or d.c. powered pressure sensing controls with a rated voltage not exceeding 690 V a.c. or 600 V d.c. This standard does not take into account the response value of an automatic action of a pressure sensing control@ if such a response value is dependent upon the method of mounting it in the equipment. Where a response value is of significant purpose for the protection of the user@ or surroundings@ the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply. This standard applies also to pressure sensing controls incorporating electronic devices@ requirements for which are contained in Annex H. This standard applies also to pressure sensing controls using NTC or PTC thermistors@ requirements for which are contained in Annex J. This standard contains requirements for electrical features of pressure sensing controls and requirements for mechanical features that affect their intended operation. NOTE Subclause 18.101@ as it pertains to gas and/or oil controls@ is under consideration pending review or revision of ISO 22967@ ISO 22968 and ISO 23550 series@ if applicable. In general@ these pressure sensing controls are integrated or incorporated with the equipment or are intended to be integrated in@ or on the equipment. This standard also covers these controls when they are independently mounted. In-line cord controls are not covered by this standard."

Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements