97.120 家用自动控制装置 标准查询与下载

NF C47-735/A2:2010 家用及类似用途电器用自动电控制设备.第2-5部分:自动电燃烧器控制设备的详细要求

Automatic electrical controls for household and similar use - Part 2-5 : particular requirements for automatic electrical burner control systems.

BS EN 50491-2:2010+A1:2015 家庭和楼宇电子系统 (HBES) 以及楼宇自动化和控制系统 (BACS) 的一般要求 环境条件

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Environmental conditions

BS EN 50491-2:2010 家用及建筑电子系统(HBES)和建筑自动化控制系统(BACS)一般要求.环境条件

This European Standard provides the environmental conditions for all devices connected to HBES/BACS. This European Standard is applicable (but not limited) to - operator stations and other human system interface devices, - devices for management functions, - control devices, automation stations and application specific controllers, - field devices and their interfaces, - cabling and interconnection of devices, - dedicated devices for engineering and commissioning tools for HBES/BACS. The standard defines the general requirements for devices operating in weather protected and nonweather protected locations, ship environments, portable use and also for storage and transport.

General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) - Environmental conditions

BS CWA 50560:2010 家庭服务(IFRS)用互操作性框架要求规范

Interoperability framework requirements specification for service to the home (IFRS)

BS EN 60730-2-15:2010 家用和类似用途的电气自动控制器.自动电子气流,水流和水位传感器的详细要求

1.1 This part of IEC 60730 applies to automatic electrical air flow, water flow and water level sensing controls for use in, or in association with, boilers with a maximum pressure rating of 2 000 kPA (20 bar) and equipment for general household and similar use including controls for heating, air- conditioning and similar applications. Examples are water flow and water level sensing controls of the float or electrode-sensor type used in boiler applications and air flow, water flow and water level sensing controls for swimming pool pumps, water tank pumps, cooling towers, dishwashers, washing machines, air conditioning chillers and ventilation applications. 1.1.1 This standard applies to the inherent safety, to the operating values, operating sequences where such are associated with equipment protection, and to the testing of automatic electrical air flow, water flow and water level sensing controls used in, or in association with, household and similar equipment. This standard is also applicable to controls for appliances within the scope of IEC 60335-1 and IEC 60364-7-702. Automatic electrical air flow, water flow and water level sensing controls for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs. This standard is not applicable to pressure-operated air flow, water flow and water level sensing controls, requirements for which are contained in IEC 60730-2-61). This standard does not apply to air flow, water flow and water level sensing controls designed exclusively for industrial applications. Throughout this standard, the word "equipment" means "appliance and equipment". 1.1.2 This standard applies to automatic electrical controls, mechanically or electrically operated, responsive to or controlling air flow, water flow and water level. 1.1.3 This standard contains requirements for electrical features of air flow, water flow and water level sensing controls and requirements for mechanical features that may affect their intended operation and electrical safety. 1.1.4 This standard applies to manual controls when such are electrically and/or mechanically integral with air flow, water flow and water level sensing controls. Requirements for manual switches not forming part of an automatic control are contained in IEC 60669 and IEC 61058-1. 1.1.5 In general, these air flow, water flow and water level sensing controls are integrated or incorporated with the equipment or are intended to be integrated or incorporated in or on the equipment. This standard also covers controls when they are independently mounted or of inline cord construction. 1.2 This standard applies to controls with a rated voltage not exceeding 690 V and a rated current not exceeding 63 A. 1.3 This standard takes into account the response value of an automatic action of a control where such a response value is dependent upon the method of mounting the control. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate household equipment standard or as determined by the manufacturer shall apply. 1.4 This standard applies also to controls incorporating electronic devices, requirements for which are contained in Annex H. This standard applies also to controls using NTC and PTC thermistors, requirements for which are contained in Annex J.

Automatic electrical controls for household and similar use - Particular requirements for automatic electrical air flow, water flow and water level sensing controls

DIN EN 50523-2:2010 家用电器互连接.第2部分:数据结构

This European Standard specifies the message Date structures used for communication between devices that comply with the Household Appliances Interworking standard. It is a companion document to EN 50523-1, Functional specification.

Household appliances interworking - Part 2: Data structures; German version EN 50523-2:2009

DIN EN 50523-1:2010 家用电器互连接.第1部分:功能规范

This European Standard focuses on Interworking of houshold appliances and describes the necessary control and monitoring. It defines a set of functions of household and similar electrical appliances which are connected together and to other devices by a network in the home.

Household appliances interworking - Part 1: Functional specification; German version EN 50523-1:2009

BS EN 60730-2-4:2010 家用和类似用途自动电气控制装置 密封和半密封型电动压缩机组的电动机热保护器的特殊要求

Automatic electrical controls for household and similar use. Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

BS EN 60730-2-4:2007 家用和类似用途自动电气控制装置.密封和半密封型电动压缩机组的电动机热保护器的特殊要求

This part of IEC 60730 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is an integrated control which is dependent on its correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. Requirements concerning the testing of the combination of motor and thermal motor protectors are given in IEC 60335-2-34. This standard applies to thermal motor protectors for motor compressors using NTC or PTC thermistors, additional requirements for which are contained in Annex J. This standard applies to the inherent safety, to the operating values, operating times, and operating sequences, where such are associated with equipment safety, and to the testing of thermal motor protectors used in or on sealed (hermetic and semi-hermetic type) motor-compressors. This standard applies to thermal motor protectors for motor-compressors within the scope of IEC 60335-2-34. Throughout this standard the word "equipment" means "appliance and equipment". Thermal motor protectors for motor compressors not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to thermal motor protectors designed exclusively for industrial applications.

Automatic electrical controls for household and similar use - Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

JIS C 9730-2-6:2010 家用和类似用途的自动电气控制装置.第2-6部分:包括机械要求的自动电压力感应控制器的特殊要求

Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

JIS C 9730-2-2:2010 家用和类似用途的电气自动控制器.第2-2部分:电动机热保护器的特殊要求

Automatic electrical controls for household and similar use -- Part 2-2: Particular requirements for thermal motor protectors

JIS C 9730-2-15:2010 家用和类似用途的自动电气控制器.第2-15部分:自动电气气流、水流和水位感应控制器的特殊要求

Automatic electrical controls for household and similar use -- Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls

JIS C 9730-2-13:2010 家用和类似用途的电器自动控制器.第2-13部分:湿度敏感控制器的特殊要求

Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls

JIS C 9730-2-12:2010 家用和类似用途的电气自动控制器.第2-12部分:电动门锁的特殊要求

Automatic electrical controls for household and similar use -- Part 2-12: Particular requirements for electrically operated door locks

JIS C 9730-2-11:2010 家用和类似用途的电气自动控制器.第2-11部分:能量调制器的特殊要求

Automatic electrical controls for household and similar use -- Part 2-11: Particular requirements for energy regulators

JIS C 9730-2-10:2010 家用和类似用途的电气自动控制器.第2-10部分:电动机启动继电器的特殊要求

Automatic electrical controls for household and similar use -- Part 2-10: Particular requirements for motor-starting relays

IEC 60730-1:2010 家用和类似用途的电自动控制器.第1部分:一般要求

In general, this International Standard applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof.

Automatic electrical controls for household and similar use - Part 1: General requirements

DIN EN 50491-3:2010 家庭和建筑电子系统(HBES)和建筑自动化和控制系统(BACS)用一般要求.第3部分:电气安全性要求.德文版本EN 50491-3-2009

This European Standard provides the electrical safety requirements for all devices connected to HBES/BACS and shall be used in conjunction with relevant product safety standards. It is applicable to operator stations and other human system interface devices, devices for management functions, control devices, automation stations and application specific controllers, field devices and cabling and interconnection of devices. This European Standard covers requirements and compliance criteria for protection from hazards in the device, protection from overvoltages on the network, protection from touch current, protection from hazards caused by different type of circuits and protection of the communication wiring from overheating caused by excessive current.

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements; German version EN 50491-3:2009

ISO/IEC 14543-5-22:2010 信息技术.家电设备(HES)体系结构.第5-22部分:HES 2级和3级用智能分组和资源分配.应用轮廓.文件轮廓

This part of ISO/IEC 14543 specifies the file data streaming application profile, device interaction flow model, the request and response messages in the device interaction process, and the service description format of the devices based on Intelligent Grouping and Resource Sharing (IGRS), ISO/IEC 14543-5-1. This standard is applicable to resource sharing and service collaboration of file data stream among computers, consumer electronics, and communication devices in a Local Area Network (LAN) or Personal Area Network (PAN) environment, especially in a wireless dynamic network.

Information technology - Home electronic system (HES) architecture - Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - Application profile - File profile

BS EN 50090-3-3:2010 家用和建筑物电子系统（HBES） 应用方面 HBES互连模型和通用HBES数据类型

Home and building electronic systems (HBES). Aspects of application. HBES Interworking model and common HBES data types