97.120 家用自动控制装置 标准查询与下载

SANS 60730-2-9:2008 家用及类似用途的自动电气控制.第2.9部分:对温度敏感控制器的特殊要求

Applies to automatic electrical temperature sensing controls for use in, on or in association with equipment for household and similar use, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electr

Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls

NF P52-704:2008 加热、通风和空气调节设备的控制.电子单个区域控制设备

Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment.

DS/EN 15500:2008 供暖、通风和空调应用的控制 电子独立区域控制设备

The purpose of this standard is to specify the applications, functionality set and application performance for electronic individual zone control equipment. The applications are for cooling and hot water or electrical heating as described in Annex B.This standard applies specifically to individual zone control equipment for maintaining temperature, humidity and air flow as a function of occupancy and demand operated with auxiliary electrical energy.Information required for the operation of the equipment may be processed using either analogue or digital techniques or a combination of both. Safety requirements remain unaffected by this standard.This standard

Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment

GSO IEC 60730-1:2008 家用和类似用途自动电气控制装置 第1部分：一般要求

لا يوجـد

Automatic electrical controls for household and similar use-Part 1:General requirements

DIN EN 60730-2-13:2008 家用和类似用途的自动电控制器.第2-13部分:湿敏控制器的特殊要求(修改的IEC 60730-2-13-2006)

Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:2006, modified); German version EN 60730-2-13:2008

DIN EN 60730-2-11:2008 家用和类似用途的自动电控制器.第2-11部分:能量调节器的特殊要求

Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators (IEC 60730-2-11:2006); German version EN 60730-2-11:2008

EN 50090-5-3:2006 家用和建筑用电子系统(HBES).第5-3部分:介质和介质独立层.射频

This European Standard defines the mandatory and optional requirements for the medium specific Physical and Data Link Layer of Radio Frequency for HBES products and systems, a multi-application bus system where the functions are decentralised, distributed and linked through a common communication process. This European Standard is used as a product family standard. It is not intended to be used as a stand-alone standard. Data Link Layer interface and general definitions, which are medium independent, are given in EN 50090-4-1.

Home and Building Electronic Systems (HBES) — Part 5-3: Media and media dependent layers — Radio frequency

BS EN 50090-5-3:2006 家用和建筑用电子系统(HBES).介质和介质依赖层.无线电频率

This European Standard defines the mandatory and optional requirements for the medium specific Physical and Data Link Layer of Radio Frequency for HBES products and systems, a multi-application bus system where the functions are decentralised, distributed and linked through a common communication process. This European Standard is used as a product family standard. It is not intended to be used as a stand-alone standard. Data Link Layer interface and general definitions, which are medium independent, are given in EN 50090-4-1.

Home and building electronic systems (HBES) - Part 5-3: Media and media dependent layers - Radio frequency

DS/CLC/TR 50455:2008 EN 60730系列《家用和类似用途的自动电气控制装置》解释清单

This Technical Report contains a list of interpretations related to the EN 60730 series. Interpretations have grouped according to different standards. The Technical Report will be updated annually, if necessary. Once an interpretation is superseded by inclusion of suitable wording in the relevant standard in the EN 60730 series, the interpretation will be withdrawn from this document.

List of interpretations on the EN 60730 series ""Automatic electrical controls for household and similar use""

DS/ISO/IEC 14543-4-1:2008 信息技术 家用电子系统（HES）架构 第 4-1 部分：通信层 HES 1 类网络增强控制设备的应用层

This part of the ISO/IEC 14543 specifies the services and protocol of the application layer for usage in Home Electronic System. It provides the services and the interface to the user process. This procedure is based on the services and the protocol is provided by the Transport Layer, Network Layer and Data Link Layer as specified in ISO/IEC 14543-4-2.

Information technology - Home electronic system (HES) architecture - Part 4-1: Communication layers - Application layer for network enhanced control devices of HES Class 1

DS/ISO/IEC 14543-4-2:2008 信息技术 家用电子系统（HES）架构 第 4-2 部分：通信层 HES 1 类网络增强控制设备的传输、网络和数据链路层的一般部分

This part of ISO/IEC 14543 specifies the services and protocol in a manner independent of thephysical layer for the data link layer and for the network layer and the transport layer for usage inHome Electronic Systems.ISO/IEC 14543-4 is designed to enable the use of power line and wireless protocols as transmissionmedia. Slow transmission speeds discourage large data transfers and it is desirable to reduce themounting load on simple devices. In light of this situation, this part of ISO/IEC 14543-4 specifies theframe format for the Communications Middleware Block to minimize message size while fulfilling therequirements of the communications layer structure.

Information technology - Home electronic system (HES) architecture - Part 4-2: Communication layers - Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1

SANS 60730-2-14:2008 家用及类似用途自动电气控制.第2-14部分:对电力传动装置的特殊要求

Applies to electric actuators for use in, on, or in association with equipment for household and similar use for heating, air-conditioning and ventilation. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combinat

Automatic electrical controls for household and similar use Part 2-14: Particular requirements for electric actuators

DS/EN 60730-2-12/A11:2008 家用和类似用途的自动电气控制 第 2-12 部分：电动门锁的特殊要求

In general, this part of EN 60730 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use.

Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks

SANS 60730-2-17:2008 家用及类似用途的自动电气控制.第2-17部分:对电动气阀的特殊要求，包括机械规定

Applies to electrically operated gas valves for use in, on or in association with, equipment for household and similar use that use electricity, in combination with fuel in the gaseous state such as manufactured gas, natural gas or liquefied petroleum ga

Automatic electrical controls for household and similar use Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements

SANS 60730-2-19:2008 家用及类似用途的自动电气控制.第2-19部分:对电动油阀的特殊要求，包括机械规定

Applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use electricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc.

Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements

DIN EN 60730-2-4:2008 家用和类似用途自动电控制器.第2-4部分:密封和半密封型电动压缩机用热电动机保护装置的特殊要求(修正的IEC 60730-2-4-2006)

Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type (IEC 60730-2-4:2006, modified); German version EN 60730-2-4:2007

BS EN 15500:2008 加热、通风和空调装置的控制.电子单个区域控制设备

The purpose of this standard is to specify the applications, functionality set and application performance for electronic individual zone control equipment. The applications are for cooling and hot water or electrical heating as described in Annex B. This standard applies specifically to individual zone control equipment for maintaining temperature, humidity and air flow as a function of occupancy and demand operated with auxiliary electrical energy. Information required for the operation of the equipment may be processed using either analogue or digital techniques or a combination of both. Safety requirements remain unaffected by this standard. This standard refers to the input and output requirements of the controller and not of the input and output devices as e. g. sensors and actuators. This standard covers fixed-function, configurable and programmable controllers. The control equipment may or may not be connected to a data-network however communications aspects are not covered by this standard. These devices could be applied for any kind of building, intermittent or non-intermittent occupation, residential or non residential (see Annex B).

Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment

EN 15500:2008 加热、通风和空气调节设施用控制 电子单个区域控制设备

The purpose of this standard is to specify the applications, functionality set and application performance for electronic individual zone control equipment. The applications are for cooling and hot water or electrical heating as described in Annex B. This standard applies specifically to individual zone control equipment for maintaining temperature, humidity and air flow as a function of occupancy and demand operated with auxiliary electrical energy. Information required for the operation of the equipment may be processed using either analogue or digital techniques or a combination of both. Safety requirements remain unaffected by this standard. This standard refers to the input and output requirements of the controller and not of the input and output devices as e. g. sensors and actuators. This standard covers fixed-function, configurable and programmable controllers. The control equipment may or may not be connected to a data-network however communications aspects are not covered by this standard. These devices could be applied for any kind of building, intermittent or non-intermittent occupation, residential or non residential (see Annex B).

Control for heating, ventilating and air-conditioning appl cations ?Electronic individual zone control equipment

IEC 60730-2-9:2008 家用和类似用途自动电控制器.第2-9部分:温度敏感控制器的特殊要求

This clause of part 1 is applicable except as follows:Replacement:This part of IEC 60730 applies to automatic electrical temperature sensing controls for use in@ on or in association with equipment for household and similar use@ including electrical controls for heating@ air-conditioning and similar applications. The equipment may use electricity@ gas@ oil@ solid fuel@ solar thermal energy@ etc.@ or a combination thereof.This part 2-9 applies to automatic electric controls using NTC or PTC thermistors@ additional requirements for which are contained in annex J.This part 2-9 applies to inherent safety and to operating values@ operating times and operating sequences where such are associated with equipment safety. It applies also to the testing of automatic electrical control devices used in@ or in association with@ household or similar appliances.Examples of such controls include boiler thermostats@ fan controls@ temperature limiters and thermal cut-outs.This part 2-9 does not apply to automatic electrical controls designed exclusively for industrial applications. This part 2-9 is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs.Automatic electrical controls for equipment not intended for normal household use@ but which nevertheless may be used by the public@ such as equipment intended to be used by laymen in shops@ in light industry and on farms@ are within the scope of this standard. This part 2-9 also applies to the electrical safety of temperature sensing controls with non-electrical outputs such as refrigerant flow and gas controls.This part 2-9 is also applicable to controls for appliances within the scope of IEC 60335. Throughout this part 2-9 the word "equipment" includes "appliance" and "control system". This part 2-9 applies to manual controls when these are electrically and/or mechanically integral with automatic controls.Requirements for manual switches not forming part of an automatic control are contained in IEC 61058-1.This part 2-9 applies to single operation devices as defined in this standard.Replacement:?This part 2-9 applies to controls with a rated voltage not exceeding 690 V and with a rated current not exceeding 63 A.Replacement:This part 2-9 does not take into account the response value of an automatic action of a control@ if such a response value is dependent upon the method of mounting the control in the equipment. Where a response value is of significant purpose for the protection of the user@ or surroundings@ the value defined in the appropriate household equipment standard or as determined by the manufacturer shall apply.Replacement:This part 2-9 applies also to controls incorporating electronic devices@ requirements for which are contained in annex H.

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

LST EN 60730-2-13-2008 家用和类似用途的自动电气控制 第 2-13 部分：湿度传感控制的特殊要求（IEC 60730-2-13:2006，已修改）

Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:2006, modified)