97.120 家用自动控制装置 标准查询与下载

IEC 60730-2-19:2007 家用和类似用途自动电气控制装置.第2-19部分:电动油阀(包括机械要求)的特殊要求

1.1 This part 2 of IEC 60730 applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use electricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc. This part 2 also applies to electrically operated oil valves using NTC or PTC thermistors, requirements for which are contained in annex J. 1.1.1 This standard applies to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of electrically operated oil valves used in, or in association with, household or similar equipment, but also extended to industrial purposes where no dedicated product standard exists, such as that for central heating, air conditioning, process heating, etc. This part 2 is also applicable to controls for appliances within the scope of IEC 60335-1. Throughout this part 2 the word "equipment" means "appliance and equipment". This part 2 does not apply to electrically operated oil valves designed exclusively for industrial applications. Electrically operated oil valves for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this part 2. This part 2 identifies a number of mechanical features as "under consideration". Until these mechanical requirements are incorporated in this part 2, each country using this part 2 will have to quantify these requirements. Compliance of an electrically operated oil valve with this part 2 does not imply that the valve is acceptable without further tests for these mechanical features. 1.1.2 This part 2 applies to manual controls when such are electrically and/or mechanically integral with electrically operated oil valves. Requirements for manual switches not forming part of an electrically operated oil valve are contained in IEC 61058-1. This part 2 does not apply to electrically operated oil valves of nominal connection size above DN 150. Hereinafter, the term "valve" is used to denote an electrically operated oil valve (including prime mover and valve body). 1.1.3 An electric actuator that is submitted to the testing laboratory in combination with an oil valve will be evaluated under this part 2. A separate electric actuator is evaluated under IEC 60730-2-14, which provides particular requirements for electric actuators. 1.1.4 This part 2 also applies to valves utilized as part of a system, or valves mechanically integral with multifunctional controls.

Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements

IEC 60730-2-17:2007 家用和类似用途电自动控制器.第2-17部分:电动煤气阀门(包括机械要求)的特殊要求

This clause of part I is replaced as follows: Replacement: 1.1 This part 2 of IEC 60730 applies to electrically operated gas valves for use in, on or in association with, equipment for household and similar use that use electricity, in combination with fuel in the gaseous state such as manufactured gas, natural gas or liquefied petroleum gas intended to be used for gas burning equipment. Additional considerations may be necessary for gas with corrosive properties. This part 2 also applies to electrically operated gas valves using NTC or PTC thermistors, requirements for which are contained in annex J. 1.1.1 This standard applies to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of electrically operated gas valves used in, or in association with, household or similar equipment, but also extended to industrial purposes when no dedicated product standard exists, such as that for central heating, air conditioning, process heating, etc. This part 2 is also applicable to controls for appliances within the scope of IEC 60335-1. Throughout this part 2 the word "equipment" means "appliance and equipment". This part 2 does not apply to electrically operated gas valves designed exclusively for industrial applications. Electrically operated gas valves for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this part 2. This part 2 identifies a number of mechanical features as "under consideration". Until these mechanical requirements are incorporated in this part 2, each country using this part 2 will have to quantify these requirements. Compliance of an electrically operated gas valve with this part 2 does not imply that the valve is acceptable without further tests for these mechanical features. 1.1.2 This part 2 applies to manual controls when such are electrically and/or mechanically integral with electrically operated gas valves. Requirements for manual switches not forming part of an electrically operated gas valve are contained in IEC 61058-1. This part 2 does not apply to electrically operated gas valves of nominal connection size above DN 150. This part 2 applies to electrically operated gas valves for maximum working pressures up to 400 kPa (4 bar). Hereinafter, the term "valve" is used to denote an electrically operated gas valve (incluclJng prime mover and valve body). 1.1.3 An electric actuator that is submitted to the testing laboratory in combination with a gas valve will be evaluated under this part 2. A separate electric actuator is evaluated under lEO 60730-2-14, which provides particular requirements for electric actuators. 1.1.4 This part 2 also applies to valves utilJzecl as part of a system, or valves mechanically integral with multifunctional controls. 1.1.5 This part 2 does not apply to valves energized by thermoelectric energy generated in a thermocouple or thermopile inserted Jn a gas flame. 1.3 Is not applicable.

Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements

DIN EN 50090-2-2:2007 住宅和建筑物电子系统(HBES).第2-2部分:系统概述.一般技术要求

Home and Building Electronic Systems (HBES) - Part 2-2: System overview - General technical requirements; German version EN 50090-2-2:1996 + Corrigendum:1997 + A1:2002 + A2:2007

DIN EN 60730-1 Berichtigung 1:2007 家用和类似用途电气自动控制器.第1部分:一般要求.技术勘误DIN EN 60730-1(VDE 0631-1)-2005

Automatic electrical controls for household and similar use - Part 1: General requirements (IEC 60730-1:1999, modified + A1:2003, modified); German version EN 60730-1:2000 + A1:2004 + A12:2003 + A13:2004 + A14:2005, Corrigenda to DIN EN 60730-1 (VDE 0631-

DS/ISO/IEC 14543-3-5:2007 信息技术 家用电子系统（HES）架构 第 3-5 部分：媒体和媒体相关层 基于网络控制 HES 1 类的电力线

This International Standard defines the mandatory and optional requirements for the medium specific Physical and Data Link Layer of Power Line Class 1 in its two variations PL110 and PL132.NOTE Data Link Layer interface and general definitions, which are medium independent, are given inISO/IEC 14543-3-1.

Information technology - Home electronic system (HES) architecture - Part 3-5: Media and media dependent layers - Powerline for network based control of HES Class 1

LST EN 50090-2-2+AC-2000/A2-2007 家庭和建筑电子系统（HBES） 第 2-2 部分：系统概述 一般技术要求

Home and Building Electronic Systems (HBES) - Part 2-2: System overview - General technical requirements

DS/EN 60730-1/A16:2007 家用和类似用途的自动电气控制器 第1部分：一般要求

Applies to automatic electrical controls for household and similar use. Part 1 gives the general requirements. Parts 2 to be used in conjunction with Part 1 will give particular requirements for specific types of controls.

Automatic electrical controls for household and similar use - Part 1: General requirements

DS/CLC/TR 50412-1:2007 频率范围为 1.6 MHz 至 30 MHz 的低压装置中使用的电力线通信设备和系统 第1部分：总则

This Technical Report applies to electrical equipment using signals in the frequency range 1,6 MHz to30 MHz to transmit information on low voltage electrical systems, either on the public supply system orwithin installations in consumers’ premises.It is a Technical Report covering the different standards for HF Power Line produced by SC205A.It points to related documents about:• Frequency bands, coexistence and filters.• Limits for the terminal output levels in the operating band.• Limits for conducted and radiated disturbance (product & installation EMC).• Measurement methods.It does not specify the signal modulation methods nor the coding methods nor func

Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 1: General

SANS 60730-1:2007 家用和类似用途的自动电控制器．第1部分：一般要求

Applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications.

Automatic electrical controls for household and similar use Part 1: General requirements

DS/EN 60730-1/A15:2007 家用和类似用途的自动电气控制器 第1部分：一般要求

1.1 In general, this standard applies to automatic electrical controls for use in, on, or inassociation with equipment for household and similar use, including controls for heating,air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel,solar thermal energy, etc., or a combination thereof.1.1.1 This standard applies to the inherent safety; to the operating values, operating times,and operating sequences where such are associated with equipment safety; and to the testingof automatic electrical control devices used in, or in association with, household or similarequipment.This standard is also applicable to controls

Automatic electrical controls for household and similar use - Part 1: General requirements

LST EN 50090-5-3-2007 家庭和建筑电子系统（HBES） 第 5-3 部分：媒体和媒体相关层 射频

Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio frequency

IEC 60730-2-19:1997/AMD2:2007 修改件2.家用和类似用途的自动电气控制装置.第2-19部分:电动油阀的特殊要求 包括机械要求

Amendment 2 - Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements

DS/EN 14908-4:2007 楼宇自动化、控制和楼宇管理中的开放式数据通信 控制网络协议 第4部分：IP 通信

This European Standard specifies the transporting of Control Network Protocol (CNP) packets over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within the IP packets. It applies to both CNP nodes and CNP routers.The purpose of this European Standard is to insure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP protocol.The main body of this European Standard is independent of the CNP protocol being transported over the IP network. The reader is directed to Annex A and Annex B for the normative and informative, respectively, aspects of this specificat

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication

DS/EN 14908-3:2007 楼宇自动化、控制和楼宇管理中的开放式数据通信 控制网络协议 第3部分：电力线通道规范

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium.This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.Certain aspects of the standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this European Standard will prevail.

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification

DS/EN 14908-2:2007 楼宇自动化、控制和楼宇管理中的开放式数据通信 控制网络协议 第2部分：双绞线通信

This European Standard specifies the control network protocol (CNP) free-topology twisted-pair channel and serves as a companion European Standard to prEN14908-1. The channel supports communication at 78.125 kbps between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply, and application electronics. This European Standard covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sub-layer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication

SANS 60730-2-11:2007 家用和类似用途的自动电气控制装置．第2．11部分：能量调节器的特殊要求

Applies to energy regulators for use in, on, or in association with equipment for household and similar use, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, sol

Automatic electrical controls for household and similar use Part 2-11: Particular requirements for energy regulators

SANS 60730-2-13:2007 家用和类似用途的自动电气控制装置．第2．13部分：湿敏控制器的特殊要求

Applies to automatic electrical humidity sensing controls for use in, on or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar application. The equipment may use electricity, gas, oil

Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing controls

SANS 60730-2-3:2007 家用和类似用途的自动电气控制装置．第2．3部分：管式荧光灯用镇流器热保护器的特殊要求

Applies to the evaluation of thermal protectors for ballasts for tubular fluorescent lamps. Also applies to thermal protectors using negative temperature coefficient (NTC) or positive temperature coefficient (PTC) thermistors.

Automatic electrical controls for household and similar use Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

SANS 60730-2-12:2007 家用和类似用途的自动电气控制装置．第2．12部分：电动门锁的特殊要求

Applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use. Applies to door locks with electrical circuits and control circuits such as locks operated by bimetals, magnet coils, memory

Automatic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door locks

SANS 60730-2-16:2007 家用和类似用途的自动电气控制装置．第2．16部分：家用和类似用途的浮子式水位自动电控设备的特殊要求

Applies to automatic electrical water level operating controls of float type for use in, on or in association with equipment for general household and similar use.

Automatic electrical controls for household and similar use Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications