97.120 家用自动控制装置 标准查询与下载

IEC 60730-2-11:2006 家用和类似用途的电气自动控制器.第2-11部分:能量调制器的特殊要求

In general, this part of IEC 60730 applies to energy regulators for use in, on, or in association with equipment for household and similar use, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard applies to the inherent safety, to the operating values, operating times and operating sequence where such are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, household or similar equipment. This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1. Throughout this standard the word “equipment” means “appliance and equipment”. This standard does not apply to automatic electrical energy regulators designed exclusively for industrial applications. This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs. Energy regulators for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. See also Annex J. 1.1.4 Replacement: This standard applies to manual energy regulators when such are electrically and/or mechanically integral with automatic controls. Requirements for manual switches not forming part of an automatic energy regulator are contained in IEC 61058-1. 1.2 Replacement: This standard applies to energy regulators with a rated voltage not exceeding 690 V and with a rated current not exceeding 63A. 1.3 Not applicable. 1.4 Replacement: This standard applies also to energy regulators incorporating electronic devices, requirements for which are contained in Annex H. This standard applies also to energy regulators using NTC or PTC thermistors, additional requirements for which are contained in Annex J.

Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators

DS/CEN/TS 15231:2006 楼宇自动化、控制和楼宇管理中的开放式数据通信 Lonworks 和 BACnet 之间的映射

The LONWORKS communication system is widely used in building automation systems for field-level and application-level functions for residential and non-residential controls in lighting, sun protection, HVAC, energy management and security applications. The BACnet communication system is also used in building automation systems for management-level and application-level functions. This technical specification defines the methods for combining BACnet networks with LONWORKS networks, and standardizes the interface between BACnet and LONWORKS systems.

Open data communication in building automation, controls and building management - Mapping between Lonworks and BACnet

DIN EN 60730-2-12:2006 家用和类似用途的电气自动控制器. 第2-12部分: 电动门锁的详细要求（IEC 60730-2-12: 2005 修改件）; 德文版本 EN 60730-2-12: 2006

Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks (IEC 60730-2-12:2005, modified); German version EN 60730-2-12:2006

DIN EN 60730-2-2:2006 家用及类似用途自动电控系统. 第2-2部分: 电机热保护器详细规定（IEC 60730-2-2: 2001, 修改件 + A1: 2005修改件1）; 德文版本 EN 60730-2-2: 2002 + A1: 2006 + A11: 2005

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors (IEC 60730-2-2:2001, modifiziert + A1:2005, modified); German version EN 60730-2-2:2002 + A1:2006 + A11:2005

LST EN 60730-2-2-2002/A1-2006 家用和类似用途的自动电气控制 第 2-2 部分：热电机保护器的特殊要求（IEC 60730-2-2:2001/A1:2005，已修改）

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors (IEC 60730-2-2:2001/A1:2005, modified)

LST EN 60730-2-12-2006 家用和类似用途的自动电气控制 第 2-12 部分：电动门锁的特殊要求（IEC 60730-2-12:2005，已修改）

Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks (IEC 60730-2-12:2005, modified)

DS/CWA 50487/Corr.:2006 SmartHouse标准

The SmartHouse Code of Practice is a document that provides a ""system designer"" working to implement a SmartHouse (to be used as dwelling and as a home office) with a source of information on sensible and pragmatic guidelines for the design, installation and maintenance of SmartHouse systems and the services and applications provided.

SmartHouse Code of Practice

BS EN 60730-2-12:2006 家用和类似用途自动电气控制装置.电动门锁的详细要求

This clause of Part 1 is applicable except as follows: 1.1 Replacement: In general, this part of IEC 60730 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use. 1.1.1 Replacement: This standard applies to the inherent safety, to the operating values, operating sequences where such are associated with equipment protection, and to the testing of door locks used in, or in association with, household and similar equipment. This standard is also applicable to door locks for appliances within the scope of IEC 60335-1. Throughout this standard, the word “equipment” means “appliance” and “equipment”. Throughout this standard, the word “door” means “door, cover or lid”. The words “door lock” mean “electrically operated door lock”. This standard does not apply to door locks designed exclusively for industrial applications. This standard is also applicable to individual door locks utilized as part of a control system or door locks which are mechanically integral with multi-functional controls having non-electrical outputs. Door locks for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. See also Annex J. 1.1.2 Replacement: This standard applies to door locks with electrical circuits and control circuits which are, for example, operated by bimetals, magnet coils, memory metals, pressure elements, temperature-sensitive expansion elements or electronic elements. 1.1.3 Not applicable. 1.1.4 Replacement: This standard also applies to manual controls when such are electrically and/or mechanically integral with door locks. Requirements for manual switches not forming part of a door lock are contained in IEC 61058-1. 1.3 Replacement: This standard does not take into account the response value of an automatic action of a door lock, if such a response value is dependent upon the method of mounting the door lock in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate household equipment standard or as determined by manufacturer shall apply. 1.1 Replacement: This standard also applies to door locks incorporating electronic devices, requirements for which are contained in Annex H. This standard also applies to door locks using NTC and PTC thermistors, requirements for which are contained in Annex J.

Automatic electrical controls for household and similar use - Particular requirements for electrically operated door locks

DS/EN 50412-2-1:2006 频率范围为 1.6 MHz 至 30 MHz 的低压装置中使用的电力线通信设备和系统 第 2-1 部分：住宅、商业和工业环境 抗扰度要求

This standard applies to electrical equipment using signals in the frequency range 1,6 MHz to 30 MHz to transmit information on low voltage electrical systems, either on the public supply system or within installations in consumers' premises.It does not specify the signal modulation methods nor the coding methods nor functional features.Environmental requirements and tests are not included.The immunity requirements have been selected so as to ensure an adequate level of immunity for apparatus at residential, commercial and loght industrial premises (Class 1 environment), and industrial premises supplied from a dededicated HV/MV or MV/LV transformers (Class

Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and industrial environment - Immunity requirements

NF P52-723-2:2006 建筑自动化、控制和建筑管理中开放式数据通信.控制网络协议.第2部分:双扭线通信

Open data communication in building automation, controls and building management - Control network protocol - Part 2 : twisted pair communication.

DS/EN 14908-1:2006 楼宇自动化、控制和楼宇管理中的开放式数据通信 楼宇网络协议 第1部分：协议栈

This specification applies to a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 - 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in this specification supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages u

Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack

DS/CWA 50487:2006 SmartHouse标准

The SmartHouse Code of Practice is a document that provides a ""system designer"" working to implement a SmartHouse (to be used as dwelling and as a home office) with a source of information on sensible and pragmatic guidelines for the design, installation and maintenance of SmartHouse systems and the services and applications provided.

SmartHouse Code of Practice

LST EN 14908-2-2005 楼宇自动化、控制和楼宇管理中的开放式数据通信 控制网络协议 第2部分：双绞线通信

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication

LST EN 14908-1-2005 楼宇自动化、控制和楼宇管理中的开放式数据通信 控制网络协议 第1部分：协议栈

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack

DIN EN 60730-2-1/A11:2005 家用和类似用途自动电控制装置.第2-1部分:家用电器电控制装置的特殊要求

Automatic electrical controls for household and similar use - Part 2-1: Particular requirements for electrical controls for electrical household appliances; German version EN 60730-2-1:1997/A11:2005

DS/EN ISO 16484-3:2005 楼宇自动化和控制系统（BACS） 第3部分：功能

This Part 3 of the standard specifies the requirements for the overall functionality and engineering services to achieve building automation and control systems. It defines terms, which shall be used for specifications and it gives guidelines for the functional documentation of project/application specific systems. It provides a sample template for documentation of plant/application specific functions, called BACS points list in annex A. The informative function block examples explain a method to display the referenced functions in system documentation; they do not standardize the method for programming functions and applications. This part of the standard

Building automation and control systems (BACS) - Part 3: Functions

DS/EN 60730-2-14:2005 家用和类似用途的自动电气控制 第 2-14 部分：电动执行器的特殊要求

This part of 60730 applies to electric actuators for use in, on, or in association with equipment for household and similar use for heating, air-conditioning and ventilation. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combinition thereof. This part 2 applies to electric actuators using NTC or PTC thermistors, additional requirements for which are contained in annex J.60730-2-1 is not applicatble to electric actuators.

Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators

DS/EN 60730-2-19/A11:2005 家用和类似用途的自动电气控制 第 2-19 部分：电动油阀的特殊要求，包括机械要求

This part 2 of 60730 applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use electricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc. This part 2 also applies to electrically operated oil valves using NTC or PTC thermistors, requirements for which are contained in annex J. The requirements of EN 264, Safety shut-off devices for combustion plants using liquid fuels - Safety requirements and testing, also apply. Where there is an overlap between the mechanical (including endurance) requirements of EN 264 and those of this Part 2 the requiremen

Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements

IEC 60730-2-2:2001+AMD1:2005 CSV 家用和类似用途的电气自动控制器.第2-2部分:电动机热保护器的特殊要求

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors

IEC 60730-2-2:2005 家用及类似用途自动电控装置.第2-2部分:热电动机保护装置的特殊要求

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors