97.120 家用自动控制装置 标准查询与下载

T/CAS 762.3-2023 智能家用电器语音交互能力分级评价技术规范 第3部分： 家用电冰箱的特殊要求

本部分规定了具有语音交互功能智能家用电冰箱（以下简称“智能冰箱”）的语音交互系统参考模型、语音交互能力分级、要求、评分规则及等级判定，并描述了对应的试验方法。 本部分适用于对具有语音交互功能家用电冰箱的分级评价、设计、使用和测试。

Technical specification for classification evaluation of voice interactive capability for intelligent home appliances—Part 3：Particular requirements for Household electrical refrigerator

T/DZJN 179-2023 吸油烟机用直流变频控制器

本文件规定了吸油烟机用直流变频控制器（以下简称“控制器”）的外观和结构、功能要求和性能要求等内容，描述了相应的试验方法，规定了检验规则、标志、包装、运输和贮存的内容。 本文件适用于专为搭载吸油烟机设计的直流变频控制器的设计、生产和检测。

T/CAS 762.4-2023 智能家用电器语音交互能力分级评价技术规范 第4部分： 储水式电热水器的特殊要求

本部分规定了具有语音交互功能智能家用储水式电热水器（以下简称“智能热水器”）的语音交互系统参考模型、语音交互能力分级、要求、评分规则及等级判定，并描述了对应的试验方法。 本部分适用于对具有语音交互功能智能热水器的分级评价、设计、使用和测试。

Technical specification for classification evaluation of voice interactive capability for intelligent home appliances—Part 4: Particular requirements for Storage type electric water heater

T/CAS 762.1-2023 智能家用电器语音交互能力分级评价技术规范 第1部分：通用要求

本部分规定了具有语音交互功能智能家用电器（以下简称“智能家电”）的语音交互能力系统参考模型、语音交互能力分级、要求、评分规则及等级判定，且描述了对应的试验方法。 本部分适用于对具有语音交互功能的智能家电的分级评价、设计、使用和测试。

Technical specification for classification evaluation of voice interactive capability for intelligent home appliances— Part 1: General requirements

23/30476568 DC BS EN IEC 63510-4-1 家用电器网络和电网连接 第4-1部分 通信协议特定方面：SPINE、SPINE-IoT 和 SHIP（快速通道）

BS EN IEC 63510-4-1. Household appliances network and grid connectivity - Part 4-1. Communication Protocol Specific Aspects: SPINE, SPINE-IoT and SHIP (fast track)

23/30476551 DC BS EN IEC 63510-1 家用电器网络和电网连接 第1部分：一般要求、通用数据建模和中性消息（快速通道）

BS EN IEC 63510-1. Household appliances network and grid connectivity - Part 1. General requirements, generic data modelling and neutral messages (fast track)

23/30476562 DC BS EN IEC 63510-3-1 家用电器网络和电网连接 第3-1部分 特定数据模型映射 SPINE 和 SPINE-IoT（快速通道）

BS EN IEC 63510-3-1. Household appliances network and grid connectivity - Part 3-1. Specific Data Model Mapping. SPINE and SPINE-IoT (fast track)

23/30476559 DC BS EN IEC 63510-2 家用电器网络和电网连接 第2部分：产品特定映射、详细信息、要求和偏差（快速通道）

BS EN IEC 63510-2. Household appliances network and grid connectivity - Part 2. Product specific mappings, details, requirements and deviations (fast track)

T/CAS 500.7-2023 智能家用电器的适老化技术 第7部分：净水及饮水设备的特殊要求

本部分规定了智能净水及饮水设备（以下简称器具）的适老化技术要求、测试方法、评价规则及等级。 本部分适用于智能净水及饮水设备适老化功能的设计和评价。

Technology of elderly-oriented intelligent household appliances – Part7：special requirements for water purifier and water dispenser equipment

T/CAS 500.10-2023 智能家用电器的适老化技术 第10部分：多联式空调（热泵）机组的特殊要求

本部分规定了智能多联式空调（热泵）机组（以下简称器具）的适老化技术要求、测试方法、评价规则及等级。 本部分适用于智能多联式空调（热泵）机组的适老化功能的设计和评价。 冷水（热泵）机组和水源热泵机组参考执行。

Technology of elderly-oriented intelligent household appliances Part10：special requirements for multi-connected air conditioning (heat pump) units

T/CASME 545-2023 电动百叶帘

本文件规定了电动百叶帘的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。

Electric window blind

T/CASME 546-2023 电动开合帘

本文件规定了电动开合帘的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。

Electric opening and closing curtain

23/30476724 DC BS EN IEC 60730-2-24 自动电气控制 第2-24部分 位移传感控制的特殊要求

BS EN IEC 60730-2-24. Automatic electrical controls - Part 2-24. Particular requirements for displacement sensing controls

CSA C22.2 No.60730-2-22-2023 自动电气控制 第2-22部分：电机热保护器的特殊要求

1 Scope and normative references This clause of Part 12 is applicable except as follows: 1.1 Replacement: This part of IEC 60730 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motorcompressors. NOTE A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the relevant motor. This dependency is illustrated by: • the ability of the thermal motor protector to accurately and reliably sense the heat of the motor windings; thus, addressing the over-temperature protection due to motor overload conditions; • the ability of the thermal motor protector to accurately and reliably sense the current due to motor lockedrotor conditions; thus, reducing the response time and not being adversely affected by heat-sink at the assembly spot in the application; • the influence of the motor’s electromagnetic field on the switch behaviour of the thermal motor protector; particularly, affecting the arc direction between the contacts resulting in uneven wear of the contact material and eventually leading to failure of operation. Requirements concerning the testing of the combination of sealed (hermetic and semihermetic type) motor-compressors and thermal motor protectors are given in IEC 60335-2-34. This standard applies to thermal motor protectors using NTC or PTC thermistors, additional requirements for which are contained in Annex J. 1.1.1 This standard applies to the inherent safety, to the operating values, operating times, and operating sequences, where such are associated with equipment safety, and to the testing of thermal motor protectors used in or on household or similar equipment as well as sealed (hermetic and semi-hermetic type) motor-compressors. This standard applies to thermal motor protectors for appliances within, but not limited to, the scope of IEC 60335-1 and its Part 2’s. NOTE Throughout this standard, the word “equipment” means “appliance and equipment”. Thermal motor protectors not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to thermal motor protectors designed exclusively for industrial applications. 1.1.2 This standard does not apply to other means of motor protection. 1.1.3 This standard does not apply to a manual device for opening the circuit. This Standard also applies to thermal motor protectors for use in household, commercial, or industrial applications. 1.5 Normative references Addition: IEC 60269-3, Low-voltage fuses – Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) – Examples of standardized systems of fuses A to F IEC 60335-2-34:2012, Household and similar electrical appliances – Safety – Part 2-34: Particular requirements for motor-compressors

Automatic electrical controls — Part 2-22: Particular requirements for thermal motor protectors Dispositifs de commande électrique automatiques — Partie 2-22 : Exigences particulières pour les protecteurs thermiques

T/DZJN 136-2023 家用燃气快速热水器全程节能分级评价规范

本文件规定了家用燃气快速热水器全程节能分级评价规范的技术要求、试验方法、评价方法。 本文件适用于热负荷不大于70kW的家用供热水燃气快速热水器（以下简称热水器）。 本文件不适用于燃气容积式热水器。

The whole-process energy-saving grading evaluation specification for domestic gas-fired instant water heaters

BS EN 50631-4-1:2023 家用电器网络和电网连接 通信协议具体方面：SPINE、SPINE-IoT 和 SHIP

1   Scope This document specifies the application of relevant transport protocols for Home and Wide Area Networks as well as cloud connectivity; in this case, SPINE (Smart Premises Interoperable Neutral-Message Exchange), SPINE -IoT, and SHIP (Smart Home IP ). This document is part of the EN 50631 series, which defines the information exchange between Smart Appliances and management systems in homes and buildings including energy management.

Household appliances network and grid connectivity - Communication Protocol Specific Aspects: SPINE, SPINE-IoT and SHIP

BS EN 50631-1:2023 家用电器网络和电网连接 一般要求、通用数据建模和中性消息

1   Scope This document defines data models for Interoperable Connected Household Appliances . The data models are derived from a logical decomposition of use cases into functional blocks that themselves were realized by abstract actions on the data model itself. This document is part of the EN 50631 series, which defines the information exchange between Smart Appliances and management systems in homes and buildings including energy management.

Household appliances network and grid connectivity. General requirements, generic data modelling and neutral messages

BS EN 50631-2:2023 家用电器网络和电网连接 产品特定映射、详细信息、要求和偏差

1   Scope This document maps the generic use cases , use case functions, and generic data definitions to categories of appliances (e.g. washer, dishwasher, water heater, HVAC devices) as well as any necessary appliance -specific details and deviations. This document is part of the EN 50631 series, which defines the information exchange between Smart Appliances and management systems in homes and buildings including energy management.

Household appliances network and grid connectivity - Product specific mappings, details, requirements and deviations

BS EN 50631-3-1:2023 家用电器网络和电网连接 特定数据模型映射：SPINE 和 SPINE-IoT

1   Scope This document maps the generic use case functions and data models defined in EN 50631‑1:2023 to specific languages; in this case, SPINE and SPINE -IoT. This document is part of the EN 50631 series, which defines the information exchange between Smart Appliances and management systems in homes and buildings including energy management.

Household appliances network and grid connectivity - Specific Data Model Mapping: SPINE and SPINE-IoT

EN 50631-3-1:2023 家用电器网络和电网连接 第 3-1 部分：特定数据模型映射：SPINE 和 SPINE-IoT

This document maps the generic use case functions and data models defined in EN 50631-1:2023 to specific languages; in this case, SPINE and SPINE-IoT. This document is part of the EN 50631 series, which defines the information exchange between Smart Appliances and management systems in homes and buildings including energy management.

Household appliances network and grid connectivity - Part 3-1: Specific Data Model Mapping: SPINE and SPINE-IoT