97.150 铺地非织物 标准查询与下载

ISO 24334:2019 层压地板覆盖层 - 机械组装面板的锁定强度的确定

This document specifies a method for determination of the locking strength of joints between laminate floor covering panels which are assembled with both vertical and horizontal mechanical locking systems. NOTE This method is also applicable to other mechanically assembled panels, e.g. modular multilayer floorings.

Laminate floor coverings — Determination of locking strength for mechanically assembled panels

19/30381649 DC BS ISO 18167 纺织地板覆盖物 安装实践 一般的

BS ISO 18167. Textile floor coverings. Installation practices. General

ASTM E648-19 使用辐射热源的地板覆盖系统临界辐射通量的标准试验方法

Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

T/HGJ 50590-2019 乙烯基酯树脂防腐蚀工程技术标准

    乙烯基酯树脂是国内外防腐蚀工程中公认的综合性能优良耐腐蚀材料。本标准包括1）相关原材料和制成品的物理力学性能，耐腐蚀、阻燃、防静电性能以及使用温度条件等选材依据、使用指南和试验方法；2）混凝土、碳钢基层的技术条件和处理等级要求；3）可供设计选用的防腐蚀构造形式（含：纤维增强树脂、块材、自流平、整体砂浆、玻璃鳞片等）；4）施工技术要点和养护要求；5）施工质量检验及工程验收要求；6）施工安全与环保。附有条文说明。

Technical standard for anticorrosion engineering of vinyl ester resins

ASTM D6119-19 从行人交通中产生绒线地板表面外观变化的标准实施规程

1.1 This practice covers the trafficking of pile yarn floor coverings in a laboratory in order to effect a change in surface appearance as a result of exposure to foot traffic under controlled conditions. A separate test method, D7330, covers the assessment of surface appearance change using the Carpet and Rug Institute Reference Scales.2 1.2 This practice is applicable to most changes in surface appearance observed in all types of carpet that are intended for residential or commercial use. It eliminates change in appearance associated with soiling by focusing on appearance change due to matting, flattening, or change in pile fiber configuration. Although “pile reversal” or “watermarking” is occasionally visible, this practice is not a reliable method for producing this phenomenon. 1.3 This practice may be used by mutual agreement between the purchaser and supplier to set purchasing specifications. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.Specific precautionary statements are given in Section 7. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic

ASTM D5684-19a 有关堆地板覆盖物的标准术语

1.1 This terminology is a compilation of all terminology developed by Subcommittee D13.21 on Pile Floor Coverings. 1.2 This terminology is unique to the pile floor covering industry. Meanings of the same terms used outside the industry can be found in other compilations or in other dictionaries of general usage. 1.3 In addition to being a specialized dictionary, D5684 is also useful for managing the Terminology of the Subcommittee. 1.4 Terms listed under the jurisdiction of Subcommittee D13.21. 1.5 For definitions of other textile terms see Terminology D123. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Pile Floor Coverings

BS EN ISO 10833:2019 纺织地板覆盖物 使用改进的维特曼滚筒试验测定切割边缘的抗损坏性

1   Scope This document specifies a method to determine the susceptibility of textile floor coverings to mechanical damage at cut edges. It is applicable to all textile floor coverings both as sheet materials and as tiles.

Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test

BS EN 687:2019 弹性地板覆盖物 软木塞背衬上的普通和装饰油毡规范

What is BS EN 687 - Specification for plain and decorative linoleum on a corkment backing about?    BS EN 687 discusses r esilient floor coverings.     BS EN 687 specifies the characteristics of plain and decorative linoleum on a corkment backing as a compound floor covering, supplied in roll form.   To encourage the consumer to make an informed choice, BS EN 687 includes a classificati...

Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing

BS ISO 13746:2019 纺织地板覆盖物 楼梯安装和使用指南

What is ISO 13746 - G uidelines for the installation and use of textile floor coverings on stairs about?    ISO 13746 provides g uidelines for the installation and use of textile floor coverings on stairs. ISO 13746 provides recommendations for the installation and use of textile floor coverings on stairs for both residential/domestic and contract/commercial purposes.   Note 1: ISO 13746 covers all products composed of textile ma...

Textile floor coverings. Guidelines for installation and use on stairs

ISO 13746:2019 纺织品地板 - 楼梯安装和使用指南

This document provides recommendations for the installation and use of textile floor coverings on stairs for both residential/domestic and contract/commercial purposes. It covers all products composed of textile material with a pile or non-pile use surface including the use of such products in tile form. This document is applicable only to carpets that are intended to be installed without the use of protective stair nosings. For carpets that are intended to be installed using protective stair nosings, the overall use class determines the stair suitability. NOTE 1 The use of stair nosings/edgings in public areas is often the subject of local bye-laws and legislations. NOTE 2 In many split-level dwellings, a room can have one or two steps between different levels. This situation differs from a stairway in several important respects: — the steps are usually wider and therefore traffic intensity in any one place is usually lower; — the carpet can be bent over steps in either the machine direction or the across-machine direction. On a stairway, it is normal practice to lay the carpet with the pile lying down the stairs.

Textile floor coverings — Guidelines for installation and use on stairs

ASTM F3041-14(2019) 粘合橡胶屑地板覆盖物的标准规范

1.1 This specification covers the requirements for the compound and physical characteristics of bonded rubber crumb floor coverings. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Bonded Rubber Crumb Floor Coverings

T/CADBM 11-2019 儿童活动场所用弹性地板

本标准规定了儿童活动场所用弹性地板的产品分类、等级、标记、要求、试验方法、检验规则、标志、运输和贮存。

Resilient flooring for children's play areas

ASTM D5684-19 有关堆地板覆盖物的标准术语

Standard Terminology Relating to Pile Floor Coverings

BS EN 17009:2019 除木材以外的木质材料地板 性能和标记稳定性的特征、评估和验证

What is BS EN 17009-2019 is about?   BS EN 17009 is a European standard that deals with rigid flooring products made of lignified materials other than wood, and recommends best industry guidance to ensure long service-life.   BS EN 17009 defines and specifies the relevant characteristics, requirements, and appropriate assessment methods for the determination of the suitability of floorings made with at least a top layer of lignified materials other than wood.    BS EN 17009 covers products intended to be installed as self-supporting flooring or supported by battens on a subfloor or to be installed floating or glued on a subfloor.   BS EN 17009 covers solid and multi-layer flooring products for internal use and fully enclosed public transport premises.   BS EN 17009

Flooring of lignified materials other than wood. Characteristics, assessment and verification of constancy of performance and marking

BS EN 17142:2018 模块化多层地板覆盖物 具有木粉基表面层的元件 规格、要求和测试方法

What is BS EN 17142 - Modular multilayer floor coverings with a surface layer based on wood powder about?    BS EN 17142 discusses about modular multilayer floor coverings.   BS EN 17142 specifies characteristics, states requirements, and gives test methods for modular multilayer floor coverings with a surface layer based on wood powder (as defined in 3.1).   BS EN 17142 includes a classification system, based on ISO 10874 , giving practical requirements for areas of use and levels of use, to indicate where powder-based floor coverings will give satisfactory service, and to encourage the consumer to make an informed choice.    BS EN 17142 also specifies requirements for marking and packaging.   Note: Powder-based floor coverings are considered for domestic and commercial l...

Modular multilayer floor coverings. Elements with a wood powder based surface layer. Specifications, requirements and test methods

ASTM D5823-19 桩地板覆盖物簇高的标准试验方法

1.1 This test method covers the determination of tuft height using a grooved specimen holder. It applies to cut-pile and loop-pile floor covering after adhesive backing has been applied to bond the pile yarn to the backing fabric. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Tuft Height of Pile Floor Coverings

KS K ISO 11638-2018 弹性地板覆盖物.泡沫异相聚氯乙烯地板.规范

Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification

KS K ISO 10595:2018 弹性地板 - 半柔性/乙烯基组合（Vct）聚（氯乙烯）地砖 - 规格

Resilient floor coverings — Semi-flexible/vinylcomposition(VCT) poly(vinyl chloride) floor tiles — Specification

KS K ISO 26986:2018 弹性地板 - 膨胀（缓冲）聚（氯乙烯）地板覆盖层 - 规格

Resilient floor coverings — Expanded(cushioned) poly(vinyl chloride) floor covering — Specification

KS K ISO 10581-2018 弹性地板覆盖物.均质聚氯乙烯地板覆盖物.规范

Resilient floor coverings — Homogenous poly(vinyl chloride) floor covering — Specification