97.150 铺地非织物 标准查询与下载

KS K ISO 26986-2018 弹性地板 - 膨胀（缓冲）聚（氯乙烯）地板覆盖层 - 规格

Resilient floor coverings — Expanded(cushioned) poly(vinyl chloride) floor covering — Specification

KS K ISO 26986:2018 弹性地板 - 膨胀（缓冲）聚（氯乙烯）地板覆盖层 - 规格

Resilient floor coverings — Expanded(cushioned) poly(vinyl chloride) floor covering — Specification

KS K ISO 10595-2018 弹性地板 - 半柔性/乙烯基组合（Vct）聚（氯乙烯）地砖 - 规格

Resilient floor coverings — Semi-flexible/vinylcomposition(VCT) poly(vinyl chloride) floor tiles — Specification

KS K ISO 11638-2018 弹性地板覆盖物.泡沫异相聚氯乙烯地板.规范

Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification

KS K ISO 11638:2018 弹性地板覆盖物.泡沫异相聚氯乙烯地板.规范

Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification

KS K ISO 10582-2018 弹性地板 - 异质聚氯乙烯地板 - 规格

Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor coverings — Specification

ISO 4918:2016+A1:2018 弹性、纺织和层压地板覆盖物 脚轮椅测试

Resilient, textile and laminate floor coverings. Castor chair test

EN ISO 24342:2018 弹性和纺织品地板覆盖物.瓷砖的边长,边的平直度和方正度的测定

This document describes methods for determining side lengths, straightness of edges and squareness of resilient or textile floor tiles and planks. The side lengths, straightness and squareness of resilient or textile floor tiles and planks are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This can cause the installed tiles/planks to line up unevenly, producing unsightly seams and corners that do not match.

Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles (ISO 24342:2018)

DIN EN 14215:2018 纺织地板覆盖物 机制地毯和地毯的分类；德文版 EN 14215:2018

This European Standard specifies requirements for machine-made (woven, tufted, knitted, needled, flocked, bonded, hand-tufted) rugs and runners, including a classification according to use intensity and luxury. This European Standard is not applicable to hand-knotted rugs, to barrier mats or to bathroom rugs.

Textile floor coverings - Classification of machine-made rugs and runners; German version EN 14215:2018

DIN EN ISO 20326:2018 弹性地板覆盖物 用于松散铺设的地板镶板/组件规范（ISO 20326:2016）；德文版 EN ISO 20326:2018

This standard specifies requirements and test methods for floor panels/assembly for domestic and commercial levels of use, which have surface layers consisting of resilient floor covering. This document is not applicable to heterogeneous polyvinyl chloride floor panels/assembly for floating installation covered by ISO 10582 or to floor panels/assembly that are subject to frequent wetting, such as bathrooms, laundry rooms and saunas.

Resilient floor coverings - Specification for floor panels/assembly for loose laying (ISO 20326:2016); German version EN ISO 20326:2018

BS EN 16354:2018 层压地板覆盖物 衬垫 规格、要求及测试方法

What is BS EN 16354 - Specification, requirements, and test methods for laminate floor coverings about?    BS EN 16354 discusses laminated floor coverings. BS EN 16354 specifies test methods for the determination of the technical characteristics of underlays under laminate floor coverings. BS EN 16354 includes minimum performance requirements for the underlay-flooring system to give satisfactory service and to encourage the consumer to make an informed choice.   BS EN 16354 specifies requirements for marking and packaging.

Laminate floor coverings. Underlays. Specification, requirements and test methods

ISO 24342:2018 弹性和织物地板覆盖物.瓷砖边长、边缘、平直度和垂直度的测定

This document describes methods for determining side lengths, straightness of edges and squareness of resilient or textile floor tiles and planks. The side lengths, straightness and squareness of resilient or textile floor tiles and planks are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This can cause the installed tiles/planks to line up unevenly, producing unsightly seams and corners that do not match.

Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles

BS ISO 24343-3:2018 弹性和层压地板覆盖物 压痕和残余压痕的测定 弹性半柔性/乙烯基组合物瓷砖的压痕

What is this standard about? This document describes a method for determining the short-term indentation resistance of resilient semi-flexible/vinyl composition tile (VCT) floor covering after the application of constant load.

Resilient and laminate floor coverings. Determination of indentation and residual indentation - Indentation of resilient semi-flexible/vinyl composition tiles

BS ISO 24343-2:2018 弹性和层压地板覆盖物 压痕和残余压痕的测定 弹性地板覆盖物的短期压痕和残余压痕

What is this standard about? This document describes a method for determining the short-term indentation and residual indentation produced in a resilient floor covering after the application and removal of a constant load. The main changes compared to the previous edition are as follows: — Clause 2 has been added; — former Clause 9 (“Precision statement”) has been removed; — some minor technical and editorial changes have been made for clarity. A list of all parts in the ISO 24343 series can be found on the ISO website.

Resilient and laminate floor coverings. Determination of indentation and residual indentation - Short-term indentation and residual indentation of resilient floor covering

ASTM F137-08(2018) 用圆柱形芯棒装置测定弹性地板材料柔韧性的标准试验方法

1.1 This test method covers the determination of the flexibility of resilient flooring materials by means of cylindrical mandrel apparatus. It is especially applicable to sheet goods and some tiles. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

ASTM F150-06(2018) 导电和静电耗散弹性地板电阻的标准试验方法

1.1 This test method covers the determination of electrical conductance or resistance of resilient flooring either in tile or sheet form, for applications such as hospitals, computer rooms, clean rooms, access flooring, munition plants, or any other environment concerning personnel-generated static electricity. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

ASTM F3009-14(2018) 聚烯烃复合地板砖的标准规范

1.1 This specification covers polyolefin composition tile with either smooth or embossed surfaces flooring application for use in commercial, light commercial or residential surfaces flooring application. 1.2 This specification covers a tile that shall be composed of binder, fillers and pigments. The binder shall consist of one or more resins of polyolefin, polyolefin copolymers or polyolefin ter-polymers (or other suitable), or any desirable combination. Other suitable polymeric resins may be incorporated as part of the binder provided the polyolefin portion of the binder system is greater than 50 %. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Polyolefin Composition Floor Tile

ASTM F1066-04(2018) 乙烯基合成地板砖的标准规范

1.1 This specification covers vinyl composition tile (VCT) with either smooth or embossed surfaces for flooring application. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Vinyl Composition Floor Tile

ISO 24343-3:2018 弹性分层地板覆盖物.压痕和残留压痕的测定.第3部分:弹性半挠性/乙烯基瓷砖的压痕

Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles

ISO 24343-2:2018 弹性分层地板覆盖物.压痕和残留压痕的测定.第2部分:弹性地板覆盖物的短期残留压痕

Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: Short-term indentation and residual indentation of resilient floor covering