97.150 铺地非织物 标准查询与下载

ASTM D5793-18 标准测试方法每单位长度或宽度的桩纱地板覆盖物的绑定点

1.1 This test method describes the measurement of the number of binding sites per unit length or width of machinemade, woven, knitted, and tufted pile yarn floor covering both before and after adhesive backing application. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings

EN 14041:2018 弹性、纺织和层压地板覆盖物.基本特性

Resilient@ textile@ laminate and modular multilayer floor coverings - Essential characteristics

ASTM F1037-18 评估弹性地板外观的标准试验方法

Standard Test Method for Visual Rating of Appearance of Resilient Floors

ASTM F1914-18 弹性地板覆盖层的短期压痕和残余压痕的标准试验方法

1.1 This test method covers procedures to determine shortterm indentation and residual indentation of resilient flooring, when subjected to concentrated loads. 1.2 The test methods appear in the following order: Section Indentation by McBurney2 Test 4 to 10 Indentation and Residual Indentation 11 to 15 1.3 There are two procedures with their respective apparatus. The first (McBurney Test) is described in Sections 4 to 10 and is restricted to a spherical foot. It is only used for initial indentation measurements of VCT. The second is described in Sections 11 to 15 and has interchangeable feet with variable geometry. It is used to measure initial and residual indentation. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

ISO 4918:2016/Amd 1:2018 弹性 纺织和复合地板覆盖物 - 脚轮椅试验

Resilient, textile and laminate floor coverings — Castor chair test

ASTM F3261-17 刚性聚合芯模块式弹性地板的标准规范

Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core

DIN EN 13845:2017 弹性地板覆盖物.带有增强防滑粒子的聚氯乙烯地板覆盖物.规范;德文版本EN 13845-2017

This European Standard specifies the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form. To encourage the consumer to make an informed choice, this European Standard includes a classification system (see EN ISO 10874) based on intensity of use, which shows where resilient floor coverings should give satisfactory service. In addition, this European Standard details the requirements for the information to be included on the packaging labels. The slip measurements are made in a laboratory on ex-factory floor covering surfaces only. The method described is suitable for testing on wet surfaces.

Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification; German version EN 13845:2017

ASTM E648-17a 使用辐射热源的地板覆盖系统临界辐射通量的标准试验方法

Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

ASTM F1914-17 标准测试方法 用于弹性地板覆盖物的短期压痕和残余压痕

Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

ISO 10582:2017 弹性地板覆盖物.多相聚乙烯(氯乙烯)地板覆盖物.规范

Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications

GSO ISO 20326:2017 弹性地板覆盖物 松散铺设地板面板/组件规范

This document specifies requirements and test methods for floor panels/assembly for domestic and commercial levels of use, which have surface layers consisting of resilient floor covering. This document is not applicable to heterogeneous polyvinyl chloride floor panels/assembly for floating installation covered by ISO 10582 or to floor panels/assembly that are subject to frequent wetting, such as bathrooms, laundry rooms and saunas.

Resilient floor coverings -- Specification for floor panels/assembly for loose laying

GSO ISO 20251:2017 纺织地板覆盖物 不透水性测试

This document specifies a laboratory test method for determining the water impermeability of textile floor coverings. This method cannot be used to characterize a wall-to-wall installation of textile floor covering tiles.

Textile floor coverings -- Water impermeability test

DIN EN 14215:2017 纺织地板覆盖物. 机织地毯和跑道的分类：德文和英文版本prEN 14215:2017

This European Standard specifies requirements for machine-made (woven, tufted, knitted, needled, flocked, bonded, hand-tufted) rugs and runners, including a classification according to use intensity and luxury. This European Standard is not applicable to hand-knotted rugs, to barrier mats or to bathroom rugs.

Textile floor coverings - Classification of machine-made rugs and runners; German and English version prEN 14215:2017

EN ISO 11378-2:2001/A1:2017 纺织地板覆盖物.实验室弄脏试验.第2部分:转鼓试验 包含修改件A1,2017

Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017)

EN 13845:2017 弹性地板覆盖物.带有增强防滑粒子的聚氯乙烯地板覆盖物.规范

Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification

EN 13553:2017 弹性地板覆盖物.用于特别潮湿地区的聚氯乙烯地板覆盖物.规范

Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification

ASTM D6962-17 用于堆垛地板的滚筒式测试仪的操作标准实践

1.1 This practice covers a procedure for the operation of a weighted roller chair testing device that rotates and moves across a test specimen of pile yarn floor coverings. 1.2 This practice is applicable for testing unused pile yarn floor covering of all types. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings

ASTM D1335-17e1 桩绒地面覆盖物的簇绒结合的标准试验方法

1.1 This test method covers the measurement of force required to pull or break a tuft from a pile floor covering sample. 1.2 This test method is applicable to both cut and loop pile yarn floor covering. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

BS ISO 10833:2017 纺织地板覆盖物. 采用改良的维特曼鼓试验测定抗切边损坏

Textile floor coverings. Determination of resistance to damage at cut edges using the modified Vettermann drum test

EN ISO 9405:2017 铺地织物.外观变化的评价

Textile floor coverings - Assessment of changes in appearance