97.150 铺地非织物 标准查询与下载

DIN EN 651:2011 弹性地板覆盖物.带泡沫层的聚氯乙烯地板覆盖物.规格.德文版本EN 651-2011

This European Standard specifies the characteristics of floor coverings based on polyvingl chloride with polyvinyl chloride foam layer, supplied in either tile or roll form.

Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification; German version EN 651:2011

DIN EN 548:2011 弹性铺地织物.普通和装饰性漆布的规范;德文版本EN 548-2011

This European Standard specifies the characteristics of plain and decorative linoleum, supplied as either tiles or rolls. To encourage the consumer to make an informed choice, the document includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking. The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are not included in this standard.

Resilient floor coverings - Specification for plain and decorative linoleum; German version EN 548:2011

DIN EN 649:2011 弹性地板覆盖物.均质和异质聚氯乙烯地板覆盖物.规范;德文版本EN 649-2011

This European Standard specifies the characteristics of homogeneous and heterogeneous floor coverings, based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form.

Resilient floor coverings - Homogeneous and heterogeneous polyvinyl chloride floor coverings - Specification; German version EN 649:2011

BS EN 649:2011 弹性地面覆盖物.均质和非均质聚氯乙烯地面覆盖物.规格

This European Standard specifies the characteristics of homogeneous and heterogeneous floor coverings, based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings. Homogenous and heterogenous polyvinyl chloride floor coverings. Specification

BS EN 651:2011 弹性地板覆盖物.有泡沫层的聚氯乙烯地板覆盖物.规格

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride with polyvinyl chloride foam layer, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification

BS EN 652:2011 弹性地板覆盖物.有软木衬的聚氯乙烯地板覆盖物.规格

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof with a cork-based backing, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings. Polyvinyl chloride floor coverings with cork-based backing. Specification

EN 654:2011 弹性覆地材料.聚氯乙烯柔性板.规范

This European Standard specifies the characteristics of semi-flexible tiles based on polyvinyl chloride andmodifications thereof.

Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification

EN 687:2011 弹性铺地材料.带和不带花纹有软木背衬的油毡规范

This European Standard specifies the characteristics of plain and decorative linoleum on a corkment backing as a compound floor covering, supplied in roll form. To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking. The term "linoleum" is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are not included inThis European Standard.

Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing

EN 688:2011 弹性地板覆盖物.corklinoleum规范

This European Standard specifies the characteristics of corklinoleum, supplied in roll form. To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking. The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are excluded fromThis standard.

Resilient floor coverings - Specification for corklinoleum

EN 653:2011 弹性地板覆盖物.膨胀的(垫子状)聚氯乙烯地板覆盖物.规范

This European Standard specifies the characteristics of floor coverings based on expanded (cushioned)polyvinyl chloride and modifications thereof, supplied in either tile or roll form.

Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification

EN 655:2011 弹性覆面层 有乙烯树脂耐磨层的胶凝成分软木砖 规范

This European Standard specifies the characteristics of agglomerated cork with a wear layer based on polyvinyl chloride and modifications thereof. To encourage the consumer to make an informed choice, the European Standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification

EN 652:2011 弹性地板覆盖物.有软木衬的聚氯乙烯地板覆盖物.规格

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof with a cork-based backing, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking

Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification

EN 651:2011 弹性覆地材料.带泡沫层的聚氯乙烯地板覆盖物.规范

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride with polyvinyl chloride foam layer, supplied in either tile or roll form. To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification

ANSI/NSF 332(i6)-2011 弹性地板的可持续性评估

Sustainability Assessment for Resilient Flooring

ANSI/NSF 332(i4)-2011 回弹地板用持续性评价

Sustainability Assessment for Resilient Flooring

ANSI/NSF 332(i3)-2011 回弹地板用持续性评价

Sustainability Assessment for Resilient Flooring

ASTM F387-11 带有泡沫层的弹性地板覆盖物厚度测量的标准试验方法

The overall thickness or caliper of resilient flooring is a basic physical property. However, conventional means of measuring the thickness, such as a hand micrometer or regular dial micrometer, are not applicable for foam-layer products due to the error from compressing the foam. This test method minimizes this type of measuring error and still retains the convenience and speed of measurement. Measurement of the product thickness may be required for quality control purposes or to ensure compliance with applicable specifications. 1.1 This test method covers the determination of the thickness of resilient non-textile floor coverings containing a foam layer as part of the construction. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

ASTM F386-11 表面平坦的弹性地板铺面材料厚度的标准试验方法

Measurement of the thickness of the product may be required for quality control purposes or to ensure compliance with applicable specifications.1.1 This test method covers the determination of thickness of resilient nontextile floor coverings including tile and sheet having flat surfaces. This test method should not be used on materials having a foamed layer. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

ASTM F511-11 弹性铺地砖切口(接缝密封性)质量的标准试验方法

Installations of resilient floor tile require tight joints if satisfactory appearance is to result. The quality of cut of resilient tile is determined by this test method.1.1 This test method covers a means of measuring and evaluating the quality of cut (joint tightness) of square or rectangular resilient floor tile. Characteristics that detract from a monolithic (seamless) appearance, such as burred, chipped, nicked, or beveled edges, or bow cut or rounded corners, are measured or observed, or both. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile

DIN EN 1817:2010 地板弹性铺覆物.均质和非均质平面地板弹性铺覆物规范.德文版本EN 1817-2010

Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings; German version EN 1817:2010