97.200.50 玩具 标准查询与下载

T/ZZB 1564-2020 玩具滑板车

本标准规定了玩具滑板车的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于设计或预定供14岁以下、体重不超过50 kg的儿童玩耍的玩具滑板车,包括可折叠和不可折叠两种形式。 本标准不适用于设计或预定用于运动目的的滑板车、可用电力驱动的滑板车。

Toy scooter

ISO 8124-3:2020 玩具安全 - 第3部分:某些元素的迁移

Safety of toys — Part 3: Migration of certain elements

T/CPQS MBPAC006-2020 产品标识规范 玩具

玩具产品标识一般要求，并给出了产品标签示例和标识指南

Specification of labelling and markings of product: Toys

SN/T 5229-2019 玩具材料中异噻唑啉酮类防腐剂测定 液相色谱-质谱联用（LC-MS）法

Determination of isothiazolinone preservatives in toy materials using liquid chromatography-mass spectrometry (LC-MS) method

T/ZZB 1226-2019 磁性塑胶片玩具

本标准规定了磁性塑胶片状玩具的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本标准适用于36个月以上年龄段使用的磁性塑胶片状玩具。 本标准不适用于磁力片以外的磁性塑胶玩具。

Magnetic plastic sheet toys

ASTM F2264-14(2019) 非动力踏板车的标准消费者安全规范

1.1 This consumer safety specification covers establishment of performance requirements, test methods, and labeling requirements to minimize the hazards to users of scooters as identified in the introduction. 1.2 This specification is intended to cover use of this product for children ages 5 years and older. 1.3 No scooter produced after the approval date of this specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements herein. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Non-Powered Scooters

T/CPQS C005-2019 儿童玩具益智等级评价技术规范

1.年龄组判定 2.玩具安全内容判定 3.分数确定原则 4.级别确定原则 5.益智玩具类型判定 6.益智性能维度的确定 7.初级影响因子判定 7.1 视觉 7.1.1颜色 7.1.2 形状 7.2 听觉 7.3 触觉 8. 中级影响因子判定 8.1 简单因果性 8.2 社会认知性 8.3 身体协调性 8.4 互动交往性 8.5 图文语言性 9. 高级影响因子判定 9.1 复杂因果性 9.2 逻辑推理性 9.3数字编程性 9.4 艺术创作性 9.5 体育锻炼性 9.6 音乐启蒙性 9.7交互合作性 10. 等级要求

Technical specification for children's toys' intelligence development evaluation

ASTM F2291-19e1 游乐设备设计标准实践

Standard Practice for Design of Amusement Rides and Devices

ASTM F2291-19 游乐设备设计标准实践

Standard Practice for Design of Amusement Rides and Devices

ISO 8124-11:2019 玩具安全第11部分:非实验装置的化学玩具（套）

This document specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are: — those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[1]; — substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; and — any other chemical substance(s) and mixture(s) delivered with the chemical toy. Additionally, requirements are specified for markings, warnings, safety rules, contents lists, instructions for use and first aid information. This document applies to: — plaster of Paris (gypsum) moulding sets; — oven-hardening plasticised PVC modelling clay sets; — polystyrene granules sets; — embedding sets; — adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents) supplied or recommended in model sets.

Safety of toys — Part 11: Chemical toys (sets) other than experimental sets

ISO 8124-10:2019 玩具安全第10部分:化学及相关活动用实验装置

This document specifies requirements for the maximum amount and, in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities. These substances and mixtures are: — those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[1]; — substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; and — any other chemical substance(s) and mixture(s) delivered with the experimental set. This document applies to experimental sets for chemistry and related activities, including crystal- growing sets, carbon-dioxide-generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science, whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to the GHS[1]. This document also specifies requirements for marking, a contents list, instructions for use, eye protection and the equipment intended for carrying out the experiments. Requirements for certain other chemical toys are given in ISO 8124-11.

Safety of toys — Part 10: Experimental sets for chemistry and related activities

ASTM F2374-19 充气娱乐装置的设计、制造、操作和维护的标准实施规程

Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices

ISO 8124-4:2014/Amd 2:2019 玩具安全第4部分:室内外家庭用秋千、滑梯和类似活动玩具修改件2

Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 2

T/ZZB 0941-2019 感官系列木制幼儿教具

本标准规定了感官系列木制幼儿教具的术语和定义、基本要求、技术要求、试验方法、检验规则、标识、包装、运输和贮存以及质量承诺。 本标准适用于供3～6岁幼儿感官教育时在室内使用的木制教具（以下简称“教具”）。

Wooden teaching aid of sensory series for children education

BS EN 71-14:2018 玩具安全 家用蹦床

What is BS EN 71-14 about? BS EN 71 discusses the safety of toys. BS EN 71 ‑ 4 is the 14th part of the multi-series and focuses on the safety of trampolines for domestic use. BS EN 71-14 specifies requirements and test methods for trampolines for domestic use, their access devices, and their enclosures, intended for outdoor and/or indoor use by one person at a time. The scope of BS EN 71-14 excludes trampolines used as gymnastic equipment, covered by EN 13219:2008 , floating inflatable trampolines, covered by the EN ISO 25649:2017 series, trampolines used in public playgrounds, inclined mat trampolines, inflatable trampolines, fitness trampolines, including trampolines for medical use, and trampolines with additional features, for example- tents, basketball hoop. Who is BS EN 71-14 for ? BS EN 71-14 on trampolines for domestic use is useful for sporting goods manufacturers. Specific users of BS EN 71-1 4 are as follows: Product designers Quality control executives Safety inspection officers Regulating authorities Why should you use BS EN 71-14? BS EN 71-14 specifies requirements for edges, sharp points, and protruding parts for trampolines for domestic use. The construction of the trampoline ensures that during play (or movement of the trampoline) the assembled joints cannot become dislodged. BS EN 71-14 discusses general requirements for the trampoline construction, requirements for mini-trampolines, requirements for medium and large trampolines, requirements for all trampoline categories, and durability of ma...

Safety of toys. Trampolines for domestic use

T/GDID 2006-2018 安抚奶嘴夹的安全规范

主要技术内容含有术语和定义、安抚奶嘴夹的描述、技术要求、试验方法、包装和产品信息等。

Safety specification of soother holders

ISO 8124-6:2018 玩具安全.第6部分:玩具和儿童中的某些邻苯二甲酸酯；s产品

This document specifies a method for the determination of di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonylphthalate (DINP) and di-iso-decyl phthalate (DIDP) (as specified in Annex A) in toys and children’s products. This document is applicable to toys and children’s products which are made of plastics, textiles, coatings and liquids. This document has been validated for polyvinylchloride (PVC) plastics, polyurethane (PU) plastics and some representative paint coatings (see Annex B). It might also be applicable to other phthalate esters and other product materials provided that adequate validation is demonstrated.

Safety of toys — Part 6: Certain phthalate esters in toys and children's products

T/CTJPA 005-2018 儿童地垫安全要求

本标准分为6个主要章节，主要内容如下： 1.前言 介绍本标准起草依据、起草单位及起草人。 2.范围 明确本标准是适用于设计或预定供14岁以下儿童玩耍时使用的或为保护14岁以下儿童活动时使用的塑胶材质的地垫产品。 3.规范性引用文件 本标准主要引用的国内外标准有：GB 6675.2—2014　《玩具安全　第2部分：机械与物理性能》、GB 6675.3—2014　《玩具安全　第3部分：易燃性能》、GB 6675.4—2014　《玩具安全　第4部分：特定元素的迁移》、GB/T 6672—2011  《塑料薄膜和薄片厚度测定 机械测量法》、GB/T 34436—2017 《玩具材料中甲酰胺测定 气相色谱-质谱联用法》、GB/T 22048—2015  《玩具及儿童用品中特定邻苯二甲酸酯增塑剂的测定》、GB/T 29784.2—2013  《电子电气产品中多环芳烃的测定 第2部分:气相色谱-质谱》、EN 71-3:2013+ A3:2018  Safety of toys Part3: Migration of certain elements。 4.术语和定义 本标准对“儿童地垫”、“易燃性能”、“表面闪烁”等术语进行了定义。 5.技术要求 （1）外观 按照玩具通用要求。 （2）材料 按照玩具通用要求。 （3）小零件 明确儿童地垫产品均应检测小零件。 （4）用于包装的塑料袋或塑料薄膜 明确了哪些材料应进行检测。 （5）易燃性能 明确了儿童地垫产品适用的要求。 （6）可迁移元素 采用欧盟最新要求，对19种元素的限量进行了要求。 （7）甲酰胺含量 对比欧盟和台湾要求，采用了更为严格的要求。 （8）邻苯二甲酸酯含量  （9）多环芳烃含量 采用欧盟REACH法规要求。 （10）双酚A 迁移量 采用欧盟玩具安全指令2009/48/EC的最新要求。 （11）产品标志和使用说明 对应标注的基本信息进行了规范，并针对儿童地垫产品要求了必须的安全警示内容。 6.测试方法 （1）一般要求 规定了最不利原则和样品预处理要求。 （2）扭力测试 针对产品实际情况，研究了产品特点，进行了明确规范。 （3）拉力测试 针对产品实际情况，研究了产品特点，对工具和方法进行了明确规范。 （4）小零件测试 按照玩具通用测试。 （5）可迁移元素含量的测定 按照EN 71-3:2013+ A3:2018进行测试。 （6）甲酰胺含量的测定 根据产品特点和标准现状，对测试方法进行了统一，按照GB/T34436-2017进行测试。 （7）邻苯二甲酸酯含量的测定 按照GB/T 22048-2015进行测试。 （8）多环芳烃含量的测定 按照GB/T 29784.2-2013进行测试。 （9）双酚A释放量的测定 按照EN71-10:2005及EN71-11:2005进行测试。 （10）塑料薄膜厚度测试 依据产品特点，明确了测试方法。

Safety requirements for playmat for young children

ISO 8124-3:2010/Amd 2:2018 玩具安全.第3部分:特点元素的迁移 修改件2

Safety of toys - Part 3: Migration of certain elements; Amendment 2

ASTM F2729-18 用于家庭使用的恒定空气充气玩具的标准消费者安全规范

1.1 This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of constant air inflatable play devices for private home use. Constant air inflatable play devices for home use that incorporate water play features and do not retain water are not considered as portable pools. Constant air inflatable play devices for home use that incorporate water play features and are intended to hold water for wading or water recreational purposes are applicable to the marking and labeling section of this specification. This specification does not apply to stored air inflatable swimming pools or sealed inflatable devices whether or not they retain water. 1.2 This consumer safety specification provides safety requirements for various types of constant air inflatable play devices for home use intended for children aged from two (2) years through twelve (12) years. 1.3 This consumer safety specification is intended to reduce the risk of death and minimize serious injury to children resulting from use of constant air inflatable play devices for home use. 1.4 No constant air inflatable play devices for home use produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. The following statement is suggested for use in identifying a product that conforms to all requirements in this specification: 1.4.1 “This product conforms to ASTM F2729, Standard Consumer Safety Specification for Constant Air Inflatable Play Device for Home Use.” 1.5 The test values and dimensions stated in SI units are to be regarded as standard. The inch-pound values in parenthesis, when given, are for information only. 1.6 General Measures, Tolerances, and Conversions: 1.6.1 The general tolerances for this specification (unless otherwise specified) are as follows: Dimension Tolerance X 6 12.7 mm (X 6 0.5 in.) X.X 6 1.27 mm (X.X 6 0.05 in.) X.XX 6 0.127 mm (X.XX 6 0.005 in.) These tolerances still apply to a dimension even when terms like greater than, less than, minimum, or maximum are used. 1.6.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only. 1.6.3 The conversion factor from SI to inch-pound units is 25.4 mm = 1 in., and 0.45359 kg = 1 lb. 1.7 The following precautionary caveat pertains only to the test methods portion of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Constant Air Inflatable Play Devices for Home Use