97.200.99 其他文娱活动设备 标准查询与下载

ASTM F2974-17 游乐设备审查标准指南

Standard Guide for Auditing Amusement Rides and Devices

ASTM F2783-17 加拿大游乐设施和装置的设计, 制造, 操作, 维护和检查的标准实施规程

4.1 The purpose of this practice is to adopt the ASTM F24 Committee Standards for Amusement Rides and Devices for use in Canada. 4.2 This practice provides guidance for use of additional codes and standards in Canada. 4.3 In cases where conflicts exist between this practice and local codes, local codes would prevail. 1.1 This practice applies to the terminology, design, manufacture, operation, maintenance, and inspection of amusement rides and devices in Canada. 1.2 This practice adopts ASTM Committee F24 Standards listed under Sections 2.2, 2.3 and 2.4. 1.3 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, etc.) related to the application of the criteria presented in this practice. 1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented in this practice. 1.5 It is the responsibility of the users of this practice and other ASTM Standards to judge their suitability for a particular purpose. 1.6 This practice includes the following sections: Title Section Scope 1 Referenced Documents 2 8199;ASTM Committee F24 Core Standards 8199;for Amusement Rides and Devices 2.2 8199;ASTM Committee F24 Supporting Standards 8199;for Amusement Rides and Devices 2.3 8199;ASTM Committee F24 Standards for 8199;Specific Classification of Amusement Rides 8199;and Devices 2.4

Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada

ASTM F1159-16 其他F24设计标准之外的游乐设备设计的标准实践

1.1 This practice establishes information and procedures for the design of amusement rides and devices and major modifications to amusement rides and devices which the designer/ engineer identifies as outside the purview of other ASTM F24 design standards. 1.1.1 Prior to designating an amusement ride or device as outside the purview of other ASTM F24 standards and subject to Practice F1159, the designer/engineer shall perform a review of all standards under the jurisdiction of the ASTM Committee F24 addressing amusement ride and device design and determine that Practice F1159 is appropriate and more applicable to the amusement ride or device than other ASTM Committee F24 practices addressing amusement ride and device design. 1.1.2 In making such a determination, the designer/engineer shall consider the following: 1.1.2.1 The general nature of the amusement ride or device; 1.1.2.2 The absence of relevant specific requirements or features addressed by other ASTM Committee F24 practices. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

ASTM F1159-16e1 其他F24设计标准之外的游乐设备设计的标准实践

1.1 This practice establishes information and procedures for the design of amusement rides and devices and major modifications to amusement rides and devices which the designer/ engineer identifies as outside the purview of other ASTM F24 design standards. 1.1.1 Prior to designating an amusement ride or device as outside the purview of other ASTM F24 standards and subject to Practice F1159-16, the designer/engineer shall perform a review of all standards under the jurisdiction of the ASTM Committee F24 addressing amusement ride and device design and determine that Practice F1159-16 is appropriate and more applicable to the amusement ride or device than other ASTM Committee F24 practices addressing amusement ride and device design. 1.1.2 In making such a determination, the designer/engineer shall consider the following: 1.1.2.1 The general nature of the amusement ride or device; 1.1.2.2 The absence of relevant specific requirements or features addressed by other ASTM Committee F24 practices. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

T/ZZB 0132-2016 海钓用旋压式鱼线轮

本标准规定了“浙江制造”品牌海钓用旋压式鱼线轮的术语和定义、基本要求、技术要求、试验方法、检验规则和标志、使用说明书、包装、运输、贮存、质量保证。 本标准适用于用钓竿钓鱼时，收、放线使用的海钓用旋压式鱼线轮（以下简称“鱼轮”）。 本标准不适用于其他类型的鱼轮。

Salt water spinning fishing reel

ASTM F2137-16 游乐设施和装置动态特性测量的标准实施规程

1.1 This practice covers acquisition of data related to the dynamic characteristics of amusement rides and devices. 1.2 This practice also defines the specific requirements of a Standardized Amusement Ride Characterization Test (SARC Test) for use in characterizing the dynamic motion of an amusement ride or device. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3.1 Exception—The values are reversed in Section 13 since EN standards primarily use SI units.

Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

ASTM F1159-15b 超出其他F24设计标准范围之外的娱乐设施和设备设计的标准实施规程

3.1 This practice provides designers/engineers of amusement rides and devices not addressed in the other ASTM Committee F24 standards with design references and criteria to use in design development. 1.1 This practice establishes information and procedures for the design of amusement rides and devices and major modifications to amusement rides and devices which the designer/engineer identifies as outside the purview of other ASTM F24 design standards. 1.1.1 Prior to designating an amusement ride or device as outside the purview of other ASTM F24 standards and subject to Practice F1159, the designer/engineer shall perform a review of all standards under the jurisdiction of the ASTM Committee F24 addressing amusement ride and device design and determine that Practice F1159 is appropriate and more applicable to the amusement ride or device than other ASTM Committee F24 practices addressing amusement ride and device design. 1.1.2 In making such a determination, the designer/engineer shall consider the following: 1.1.2.1 The general nature of the amusement ride or device; 1.1.2.2 The absence of relevant specific requirements or features addressed by other ASTM Committee F24 practices. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

ASTM F2974-15 检验娱乐乘骑设施的标准指南

4.1 The purpose of this guide is to establish guidelines for audits of amusement rides and devices. 4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device. 4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This guide does not require recurring design, manufacturing, installation, commissioning, or major modification audits. 1.1 This guide establishes guidelines for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Auditing Amusement Rides and Devices

ASTM F2137-15 测量娱乐骑乘设备及装置动态特征的标准实践规程

4.1 This practice is intended for use whenever the dynamic characteristics of an amusement ride or device are to be determined. The existence of this practice is not intended to imply that there is a requirement to perform specific testing on amusement rides or devices. 4.2 The general provisions of this practice provide instrumentation specifications, data acquisition and testing procedures, and documentation requirements that when applied will improve the repeatability, reliability, and utility of the test results. 4.3 Based on the general provisions of this practice, the SARC Test specifications, when followed, will yield standardized test results regarding the patron-related, dynamic motion of amusement rides or devices. The SARC Test will facilitate both the meaningful comparison of the dynamic motion of different amusement rides or devices and the tracking of changes, if any, in the dynamic characteristics of a given ride or device. 1.1 This practice covers acquisition of data related to the dynamic characteristics of amusement rides and devices. 1.2 This practice also defines the specific requirements of a Standardized Amusement Ride Characterization Test (SARC Test) for use in characterizing the dynamic motion of an amusement ride or device. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3.1 Exception—The values are reversed in Section 13 since EN standards primarily use SI units.

Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

ASTM F2137-15a 测量娱乐骑乘设备及装置动态特征的标准实施规程

4.1 This practice is intended for use whenever the dynamic characteristics of an amusement ride or device are to be determined. The existence of this practice is not intended to imply that there is a requirement to perform specific testing on amusement rides or devices. 4.2 The general provisions of this practice provide instrumentation specifications, data acquisition and testing procedures, and documentation requirements that when applied will improve the repeatability, reliability, and utility of the test results. 4.3 Based on the general provisions of this practice, the SARC Test specifications, when followed, will yield standardized test results regarding the patron-related, dynamic motion of amusement rides or devices. The SARC Test will facilitate both the meaningful comparison of the dynamic motion of different amusement rides or devices and the tracking of changes, if any, in the dynamic characteristics of a given ride or device. 1.1 This practice covers acquisition of data related to the dynamic characteristics of amusement rides and devices. 1.2 This practice also defines the specific requirements of a Standardized Amusement Ride Characterization Test (SARC Test) for use in characterizing the dynamic motion of an amusement ride or device. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3.1 Exception—The values are reversed in Section 13 since EN standards primarily use SI units.

Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

ASTM F1159-15 超出其他F24设计标准范围之外的娱乐乘骑设施和设备设计的标准实践规程

3.1 This practice provides designers/engineers of amusement rides and devices not addressed in the other ASTM Committee F24 standards with design references and criteria to use in design development. 1.1 This practice establishes information and procedures for the design and manufacture of patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), artificial climbing walls, dry slides, coin operated rides, and amusement rides and devices that involve the purposeful immersion of the patron's body partially or totally in the water and involve more than incidental patron contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices), and air-supported structures. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

ASTM F1159-15a 超出其他F24设计标准范围之外的娱乐乘骑设施和设备设计的标准实践规程

3.1 This practice provides designers/engineers of amusement rides and devices not addressed in the other ASTM Committee F24 standards with design references and criteria to use in design development. 1.1 This practice establishes information and procedures for the design of amusement rides and devices and major modifications to amusement rides and devices which the designer/engineer identifies as outside the purview of other ASTM F24 design standards. 1.1.1 Prior to designating an amusement ride or device as outside the purview of other ASTM F24 standards and subject to Practice F1159, the designer/engineer shall perform a review of all standards under the jurisdiction of the ASTM Committee F24 addressing amusement ride and device design and determine that Practice F1159 is appropriate and more applicable to the amusement ride or device than other ASTM Committee F24 practices addressing amusement ride and device design. 1.1.2 In making such a determination, the designer/engineer shall consider the following: 1.1.2.1 The general nature of the amusement ride or device; 1.1.2.2 The absence of relevant specific requirements or features addressed by other ASTM Committee F24 practices. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

ASTM F1159-14 超出其他F24设计标准范围之外的娱乐设施和设备设计的标准实施规程

3.1 This practice provides designers and manufacturers of patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), artificial climbing walls, dry slides, coin operated rides, water amusement rides or devices (involve the purposeful immersion of the patron's body partially or totally in the water and involve more than incidental patron contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices)), and air-supported structures with design references and criteria to use in designing and manufacturing of patron directed amusement rides or devices, artificial climging walls, dry slides, coin operated rides, purposeful immersion water amusement rides or devices, and air-supported structures. 1.1 This practice establishes information and procedures for the design and manufacture of patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), artificial climbing walls, dry slides, coin operated rides, and amusement rides and devices that involve the purposeful immersion of the patron's body partially or totally in the water and involve more than incidental patron contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices), and air-supported structures. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

KS G 6804-2013 游乐设施检验标准（飞机塔）

INSPECTION STANDARD OF AMUSEMENTS(AIRPLANE TOWER)

GSO ASTM F2137:2013 测量游乐园机械和游乐设施动态特性的标准实施规程

1.1 This practice covers acquisition of data related to the dynamic characteristics of amusement rides and devices. 1.2 This practice also defines the specific requirements of a Standardized Amusement Ride Characterization Test (SARC Test) for use in characterizing the dynamic motion of an amusement ride or device. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3.1 Exception—The values are reversed in Section 13 since EN standards primarily use SI units.

Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices

GSO ASTM F1193:2012 游乐园设备和游乐设施的质量、制造和施工

1.1 This practice establishes the minimum requirements for a quality assurance program and the manufacturing of amusement rides and devices (including major modifications). 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Practice for Quality Manufacture, and Construction of Amusement Rides and Devices

GSO ASTM F770:2012 拥有和运营游乐园设备和游乐设施的标准做法

1.1 This practice covers and establishes information for operating procedures of amusement rides and devices. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Ownership and Operation of Amusement Rides and Devices

GSO ASTM F2291:2012 游乐园设备和游乐设施设计的标准实践

1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice shall not apply to: 1.2.1 Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), 1.2.2 Artificial climbing walls, 1.2.3 Air-supported structures, 1.2.4 dry slides, 1.2.5 coin operated rides, 1.2.6 Amusement rides or devices that involve the purposeful immersion of the patron’s body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices), 1.2.7 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard, 1.2.8 Portions of an amusement ride or device unaffected by a major modification, 1.2.9 Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced, and 1.2.10 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides: 1.2.10.1 A historical summary of the amusement ride, device or major modification, and 1.2.10.2 A statement that the design is service proven or previously compliant as specified by Section 3. 1.2.11 Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice. 1.3 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria. 1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user’s understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design of Amusement Rides and Devices

GSO ASTM F893:2012 检查游乐园设备和游乐设施的标准指南

1.1 This guide establishes guidelines for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Inspection of Amusement Rides and Devices

GSO ASTM F846:2012 游乐设施和设备性能测试标准指南

1.1 This guide covers the basic tests which shall be conducted on amusement rides and devices during prototype development, installation or erection, following major modifications, and during normal operation to determine that the performance of a given ride or device meets the manufacturer’s specified design criteria. NOTE 1—The following standards developed by Committee F24 contain information relative to this guide: Specification F698, Practices E1212, F1193, and F770, Terminology E1316, and Terminology F747. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Testing Performance of Amusement Rides and Devices