97.200.99 其他文娱活动设备 标准查询与下载

SANS 60335-2-82:2003 家用及类似用途电器.安全.第2-82部分:对娱乐机及个人服务机的特殊要求

Deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.

Household and similar electrical appliances - Safety Part 2-82: Particular requirements for amusement machines and personal service machines

KS G 6804-2003(2008) 游乐场检验标准（飞塔）

INSPECTION STANDARD OF AMUSEMENTS(AIRPLANE TOWER)

ASTM F1193-03a 游乐设施和设备制造商质量保证计划和制造要求的标准实施规程

Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements

IEC 60335-2-82:2002 家用和类似用途电器的安全.第2-82部分:服务机械和娱乐机械的特殊要求

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric commercial amusement machines and personal service machines@ their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances.

Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines

UL 25 BULLETINS-2001

Covers electrical, electronic, and electromechanical commercial amusement and gaming machines and accessories that are intended to be used in accordance with the National Electrical Code, NFPA 70. Amusement and gaming machines as covered by this standard are intended for indoor use only, except that they will be investigated for outdoor use or use in a protected location if so designated by the manufacturer.

1/10/2001 (18p)

NF S52-200:2000 皮唐格(Petanque)休闲保龄球.最低质量特性

Leisure Petanque bowls - Minimum quality characteristics.

ASTM F770-05 游乐设施和装置操作规程的标准实施规程

Standard Practice for Operation Procedures for Amusement Rides and Devices

IEC 60335-2-82:1999 家用和类似用途电器的安全.第2-82部分:服务机械和娱乐机械的特殊要求

Safety of household and similar electrical appliances - Part 2-82: Particular requirements for service machines and amusement machines

ASTM F1950-99 用旧娱乐车辆和装置传输物理信息的标准规范

2.1 The purpose of this specification is to provide to the new owner of an amusement ride or device, available information for the identification, placement, erection, operation, and maintenance of the amusement ride or device.1.1 This specification covers the requirements for information that shall supplement the sale or transfer of ownership of an amusement ride or device. 1.2 This specification applies only to amusement rides and devices, which have previously been in operation, and which are beign sold or transferred as a used amusment ride or device.

Standard Specification for Physical Information to be Transferred With Used Amusement Rides and Devices

NF S52-001:1998 PETAQUE 最低质量特性.

PETANQUE BOWLS. MINIMUM QUALITY CHARACTERISTICS.

ASTM F698-94(2000) 为娱乐乘骑设施和装置提供的物理信息

1.1 This specification covers the minimum requirements for information that shall be provided by the manufacturer or seller of new amusement rides or devices as a part of the initial sale or transfer to the first end user. 1.2 This specification does not apply to the sale or transfer of used amusement rides and devices.

Standard Specification for Physical Information to be Provided for Amusement Rides and Devices

ASTM F1305-94(2002) 与受伤和疾病相关的娱乐骑座和装置的分类

The purpose of this guide is to provide a uniform procedure under which the amusement ride and device industry can organize data related to injuries and illnesses. This classification system may be used to formulate statistical information within the categories provided and will facilitate the analysis of injury and illness incidents. The classification system may assist owner/operators and manufacturers to review incidents directly related to their amusement rides and devices, and may provide information for alternatives to reduce or eliminate similar occurrences.1.1 This guide provides a uniform procedure that should be used when classifying patron injury and illness data related to amusement rides and devices. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses

ASTM F846-92(2009) 娱乐乘骑和装置的性能试验的标准指南

The purpose of this guide is to establish pertinent test data on a given ride or device which shall be used as the basis for the evaluation of the ride or device''s performance, including developmental testing, installation testing, and operational testing. This guide is intended for the use of manufacturers, owners/operators, and those persons or agencies involved in the installation and operational testing of amusement rides and devices.1.1 This guide covers the basic tests which shall be conducted on amusement rides and devices during prototype development, installation or erection, following major modifications, and during normal operation to determine that the performance of a given ride or device meets the manufacturer''s specified design criteria. Note 18212;The following standards developed by Committee F24 contain information relative to this guide: Specification F 698, Practices E 1212, F 1193, and F 770, Terminology E 1316, and Terminology F 747. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Testing Performance of Amusement Rides and Devices

CNS 8916-1988 育乐设备（水上飞船）检查标准

本标准规定育乐设施水上飞船（急流滑溜）之安全所需之检验项目、检查器具、检验方法及判定基准。

Inspection of Amusements (Water Shoot)

CNS 8915-1988 育乐设备（观览车）检查标准

本标准规定游乐设施中安全性所必须之检查项目、检查器具、检查方法及判定基准。

Inspection Standard of Amusements (Ferris Wheel)

CNS 9335-1988 育乐设备（旋转马车）检查标准

本标准适用于育乐设备旋转马车在安全上必须检查项目、检查器具、检查方法及判定基准。

Inspection of Amusement ( Merry Go Round )

FprCEN/TS 17959 游乐设施和设备的安全性：机械部件的制造质量建议

This document provides a method on how to assign minimum acceptable manufacturing quality requirements to amusement device metallic components which have been classified as machinery components. Bonded assemblies made in plastic composites are excluded from this scope. Quality requirements can be found in EN 13814-1:2019, 5.4.3.7.

Safety of amusement rides and devices: Manufacturing Quality Recommendations for Machinery Components