97.220.30 标准查询与下载
共找到 720 条与 相关的标准，共 48 页
Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods; German version EN 957-6:2010+A1:2014
- ICS
- 97.220.30
- CCS
- Y55
- 发布
- 2014-06-01
- 实施
This European Standard specifies safety requirements and test methods for treadmills in addition to the general safety requirements and test methods of EN 957-1. It is intended that EN 957-6 is applied together with EN 957-1. This part of EN 957 deals with significant hazards, hazardous situations and events relevant to stationary training equipment used as intended and under the conditions of misuse foreseeable by the manufacturer (see Clause 4). EN 957-6 is applicable to power-driven as well as to non-power/manually driven training equipment type treadmills (hereafter referred to as treadmills) with the classes S, H and I and classes A, B and C regarding accuracy. This document is not applicable to treadmills which are manufactured before the date of its publication as a European Standard.
Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2014-04
- 实施
Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013); German version EN ISO 20957-1:2013
- ICS
- 97.220.30
- CCS
- Y55
- 发布
- 2014-02
- 实施
- 2014-02-01
1.1 This test method2 specifies procedures and equipment used for testing and evaluating the accessibility of fitness equipment for compliance to Specification F3021 design parameters. Where possible and applicable, accepted test methods from other recognized bodies will be used and referenced. In case of a conflict between this document and Specification F3021, Specification F3021 takes precedence. 1.2 This test method is to be used in conjunction with Specification F3021. 1.3 This standard is to be used as additional requirements to address the accessibility of the equipment for persons with disabilities. Note 1: Additional test methods applicable to specific pieces of equipment, such as treadmills, bicycles, ellipticals, and strength equipment are currently under development. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
- ICS
- 97.220.30
- CCS
- 发布
- 2014
- 实施
1.1 This specification2 established additional requirements not set forth in the referenced ASTM standards for the design of commercial fitness equipment to increase access and user independence by people with functional limitations or impairments. 1.2 The intent of this specification is to assure that the fitness product being designed for inclusive use by individuals with and without functional limitations or impairments remains functional and safe when the equipment is operated according to the manufacturer’s operational instructions. 1.3 It is the intent of this specification to specify products for indoor use in a commercial environment by individuals age 13 and above. 1.4 Products designed to meet this specification must not be automatically classified as fit for medical or rehabilitation fitness purposes. Products intended for medical use should comply with any applicable international or national standards. 1.5 Where users are exercising from a wheelchair, it is the intent of this specification to specify products for use by individuals using manual or powered wheelchairs (including scooters). 1.6 This standard does not purport to address the needs of every possible user and recognizes that access will not be possible for all individuals or all types of assistive technologies. 1.7 Designers shall use this specification in conjunction with other ASTM fitness equipment standards and its accompanying test method. 1.8 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: Additional specifications applicable to specific pieces of equipment, such as treadmills, bicycles, ellipticals, and strength equipment are currently under development.
Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
- ICS
- 97.220.30
- CCS
- 发布
- 2014
- 实施
This part of ISO 20957 specifies additional safety requirements for strength training equipment in addition to the general safety requirements of ISO 20957-1. This part of ISO 20957 is applicable to stationary training equipment type strength training equipment with stack weight resistance or other means of resistance like weight discs, elastic cords, hydraulic, pneumatic and magnetic systems and springs (type 2) (hereinafter referred to as training equipment) with the classes S and H. Any attachments provided with the training equipment for the performance of additional exercises are subject to the requirements of ISO 20957-1.
Stationary training equipment -- Part 2: Strength training equipment, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This European Standard specifies safety requirements for treadmills in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it. This European Standard is applicable to power driven and manually driven training equipment type treadmills (type 6) (hereafter referred to as treadmills) with the classes S and H and classes A, B and C regarding accuracy.
Stationary training equipment -- Part 6: Treadmills, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 20957 specifies general safety requirements and test methods for stationary training equipment unless modified in the other parts of this International Standard. This part of ISO 20957 also covers environmental aspects. It also specifies a classification system (see Clause 4). This part of ISO 20957 is applicable to all stationary training equipment as defined in 3.1. This includes equipment for use in training areas of organizations such as sport associations, educational establishments, hotels, sport halls, clubs, rehabilitation centres and studios (classes S and I) where access and control is specifically regulated by the owner (person who has the legal responsibility), equipment for domestic use (class H) and other types of equipment including motor driven equipment as defined in 3.1. The requirements of a specific part of ISO 20957 take priority over the corresponding requirements of this general standard. If the intended use of the stationary training equipment is for children under 14 years other standards are applicable unless such stationary training equipment is intended for educational purposes in schools and other pedagogical contexts for children under the surveillance of a qualified adult instructor. This part of ISO 20957 does not apply to stationary training equipment intended for outdoor use without supervision e.g. freely accessible. NOTE 1 If a user has special needs (medical rehabilitation, disability) it is essential that the owner (the person with legal responsibility) conducts a specific risk assessment to determine safe use and if necessary to ensure trained staff are available to supervise the activity. NOTE 2 In the event that the stationary training equipment is intended for medical purposes, attention is drawn to the requirements of Council Directive of 14 June 1993 on the approximation of the laws of the Member States relating to medical devices 93/42/EEC in addition to the requirements of this part of ISO 20957. NOTE 3 In the event that the stationary training equipment is intended for children's purposes, attention is drawn to the requirements of Council Directive of 18 June 2009 on the approximation of the laws of the Member States relating to safety of toys 2009/48/EC in addition to the requirements of this part of ISO 20957. NOTE 4 In the event that the stationary training equipment is designed to be accessible to people with disability, attention is drawn to any relevant national guidelines. NOTE 5 Concerning flammability, attention is drawn to national regulations. NOTE 6 In the event that the stationary training equipment contains environmental critical components, attention is drawn to national regulations, e.g. European Directives.
Stationary training equipment - Part 1: General safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This part of EN 957 specifies safety requirements for pedal crank training equipment in addition to the general safety requirements of EN 957-1. This part of EN 957 is applicable to stationary training equipment type pedal crank training equipment (type 5) as defined in clause 3 within the classes S, H and A, B, C. Any attachment provided with the pedal crank training equipment for the performance of additional exercises are subject to the requirements of EN 957-1. This part of EN 957 is not applicable to roller stands as they cannot be made safe in a reasonable way.
Stationary training equipment -- Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This part of EN 957 specifies safety requirements for rowing machines in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it. This part of EN 957 is applicable to stationary training equipment type rowing machines (type 7), hereinafter referred to as rowing machines, within the classes S and H and class A regarding accuracy. If accessories are provided with the rowing machine for the performance of additional exercises these are subject to the requirements of EN 957-1 and any other specific requirements of the appropriate part of this standard.
Stationary training equipment -- Part 7: Rowing machines, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 20957 specifies safety requirements for exercise bicycles with a fixed wheel or without freewheel, which have an inertia > 0,6 kg · m2 in addition to the general safety requirements of ISO 20957-1. This part of ISO 20957 should be read in conjunction with ISO 20957-1. This part of ISO 20957 is applicable to stationary training equipment type exercise bicycles with a fixed wheel or without freewheel (type 10) (hereafter referred to as training equipment) within the classes S and H. Any attachment provided with the exercise bicycle with a fixed wheel or without freewheel for the performance of additional exercises are subject to the requirements of ISO 20957-1.
Stationary training equipment -- Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This part of EN 957 specifies safety requirements for stepper, stairclimber and climber machines (hereafter called training equipment) in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it. This part of EN 957 is applicable to stationary training equipment type stepper, stairclimber and climber training equipment (type 8), within classes S and H and class A for accuracy.
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers -- Additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This part of EN 957 specifies safety requirements for stationary strength training benches and free-standing barbell racks used to perform exercises during use in addition to the general safety requirements of prEN 957-1. This part of EN 957 is applicable to stationary training equipment type benches (type 4) (hereinafter referred to as benches) with the classes S and H.
Stationary training equipment -- Part 4: Strength training benches, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
This Part of EN 957 specifies safety requirements for elliptical trainers also described as cross training machines in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it.
Stationary training equipment -- Part 9: Elliptical trainers, additional specific safety requirements and test methods
- ICS
- 97.220.30
- CCS
- 发布
- 2013-12-31
- 实施
