97.220.30 标准查询与下载

GOST R 55671-2013 运动垫. 第5部分. 顶部和底部摩擦的测定

Sports mats. Part 5. Determination of the top and base frictions

GOST R 55672-2013 运动垫. 第6部分. 硬度的测定

Sports mats. Part 6. Determination of the stiffness

GOST R 55673-2013 体操器械. 高低杠. 安全要求和试验方法

Gymnastic equipment. Asymmetric bars. Requirements and test methods with regards to safety

GOST R 55675-2013 体操器械. 单杠. 安全要求和试验方法

Gymnastic equipment. Horizontal bars. Requirements and test methods with regards to safety

DIN EN 12503-4:2012 运动垫.第4部分:减震测定.德文版本FprEN 12503-4-2012

Sports mats - Part 4: Determination of shock absorption; German version FprEN 12503-4:2012

ANSI/ASTM F2115:2012 电动脚踏轧机规范

Specification for Motorized Treadmills

ANSI/ASTM F2106:2012 机动跑步机设计和性能特征评定的试验方法

Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills

LST EN 957-6-2011 固定训练设备 第6部分：跑步机，附加特定安全要求和测试方法

Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods

BS EN 957-6:2010 固定式训练器材.跑步机,补充的特定安全要求和试验方法

Stationary training equipment. Treadmills, additional specific safety requirements and test methods

DS/EN 957-6:2011 固定训练设备 第6部分：跑步机，附加特定安全要求和测试方法

EN 957-6 specifies safety requirements and test methods for treadmills in addition to the general safety requirements and test methods of EN 957-1 and shall be read in conjunction with it.EN 957-6 is applicable to power-driven as well as to non-power/manually driven training equipment type treadmills (hereafter referred to as treadmills) with the classes S, H and I and classes A, B and C regarding accuracy.

Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods

DIN EN 957-6:2011 固定式训练器材.第6部分:跑步机,附加特殊安全要求及试验方法;德文版本EN 957-6-2010

EN 957-6 specifies safety requirements and test methods for treadmills in addition to the general safety requirements and test methods of EN 957-1 and shall be read in conjunction with it. EN 957-6 is applicable to power driven as well as to non-power/manually driven training equipment type treadmills (hereafter referred to as treadmills) with the classes S, H and I and classes A, B and C regarding accuracy.

Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods; German version EN 957-6:2010

GSO ASTM F1250:2010 固定式健身自行车安全性标准规范

1.1 This safety specification covers the safety design features of stationary exercise bicycles. The device shall be assembled in accordance with the manufacturer’s instructions for safe use. 1.2 This standard is limited to exercise bicycles of: 1.2.1 Class A—Non-free-wheeling exercise bicycles with a directly driven flywheel. 1.2.2 Class B—Free-wheeling exercise bicycles. 1.2.3 Class C—Ergometer bicycles, or, those bicycles used to precisely measure work. 1.2.4 Class D—Units designed to convert road bicycles to stationary exercise bicycles. 1.3 This specification is intended to reduce the demonstrated hazards associated with the use of stationary exercise bicycles. 1.4 This specification is written to provide reasonable safety standards for the user of stationary exercise bicycles during storage, movement, entry, use, and exit from the product. 1.5 This standard does not purport to address all the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Safety Specification for Stationary Exercise Bicycles

LST EN 957-4-2006+A1-2010 固定式训练设备 第4部分：力量训练台、附加特定安全要求和测试方法

Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods

DIN EN 957-4:2010 固定式训练设备.第4部分:力量训练台,附加的专门安全要求和试验方法.德文版本EN 957-4-2006+A1-2010

Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods; German version EN 957-4:2006+A1:2010

DIN 33959:2010 体操设备. 跳桌. 功能和安全性要求及试验方法

Gymnastic equipment - Vaulting tables - Functional and safety requirements, test methods

DS/EN 957-4+A1:2010 固定式训练设备 第4部分：力量训练台、附加特定安全要求和测试方法

This part of EN 957 specifies safety requirements for stationary strength training benches and free-standing barbell racks used to perform exercises during use in addition to the general safety requirements of EN 957 1 and should be read in conjunction with it.This part of EN 957 is applicable to stationary training equipment type benches (type 4) (hereinafter referred to as benches) with the classes S, H and I.

Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods

NF S52-329-4/IN1:2010 固定训练设备.第4部分:强度训练装置、附加特定安全要求和试验方法

Stationary training equipment - Part 4 : strength training benches, additional specific safety requirements and test methods.

NF S52-329-4:2010 固定训练设备.第4部分:强度训练装置、附加特定安全性要求和试验方法

Stationary training equipment - Part 4 : strength training benches, additional specific safety requirements and test methods.

EN 957-4:2010 固定式训练设备.第4部分:力量训练台,附加的专门安全要求和试验方法

This part of EN 957 specifies safety requirements for stationary strength training benches and free-standing barbell racks used to perform exercises during use in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it.This part of EN 957 is applicable to stationary training equipment type benches (type 4) (hereinafter referred to as benches) with the classes S, H and I.

Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (Incorporates Amendment A1: 2010)

ASTM F2106-03(2010) 评价电动跑步机设计和性能特性的标准试验方法

Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills