A18 教育、学位、学衔 标准查询与下载

NAVY MIL-HDBK-29612-2 A-2001 (五部分中的第2部分)培训和教育教学系统开发/系统的方法

This handbook provides guidance that may be used by all Services and Industry on the Instructional Systems Development/Systems Approach to Training (ISD/SAT) process and the development of instructional materials. ISD/SAT process phases include: analysis, design, development, implementation, and evaluation.

INSTRUCTIONAL SYSTEMS DEVELOPMENT/SYSTEMS APPROACH TO TRAINING AND EDUCATION (PART 2 OF 5 PARTS)

NAVY MIL-HDBK-29612-4 A-2001 五部分第4部分 训练词汇

This handbook provides acronyms, abbreviations, and definitions of key terms used in the analysis, design, development, implementation and evaluation of training and training data products. Key terms and acronyms used in MIL-PRF-29612 and MIL-HDBK-29612-1, -2, -3, and -5 are repeated in this handbook to provide a single comprehensive glossary of acronyms and definitions related to military training.

GLOSSARY FOR TRAINING (PART 4 OF 5 PARTS)

NAVY MIL-HDBK-29612-3 A-2001 (五部分第3部分)(IMI)交互式多媒体教学的开发

This handbook provides background information for the planning, design, development, implementation, evaluation, and management of Interactive Multimedia Instruction (IMI) products. IMI products include electronic products used in the delivery of instruction or supporting the delivery of instruction. See 4.2 for a further breakdown of IMI products. This handbook (Part 3 of 5 Parts) also provides acquisition guidance unique to IMI products and supplements general acquisition guidance provided in MIL-HDBK-29612-1 (Part 1 of 5 Parts).

DEVELOPMENT OF INTERACTIVE MULTIMEDIA INSTRUCTION (IMI) (PART 3 OF 5 PARTS)

BS CWA 14087:2000 培训和资格认定的欧洲呼叫中心标准.客户联系代表

European call centre standards for training and qualification - Customer contact representatives

BS EN ISO 9606-3:1999 焊工的认可测试.熔焊.铜及铜合金

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper. This standard applies to the approval testing of welders for the fusion welding of copper. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Approval testing of welders - Fusion welding - Copper and copper alloys

BS EN ISO 9606-4:1999 焊工的认可测试.熔焊.镍及镍合金

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of nickel. This standard applies to the approval testing of welders for the fusion welding of nickel. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Approval testing of welders - Fusion welding - Nickel and nickel alloys

BS EN 1418:1998 焊接操作人员.金属材料全机械化焊接和自动焊接用的熔焊和电阻焊定位器的焊接操作人员的认可试验

This standard specifies requirements for approval of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding processes of metallic materials. Only welding operators/resistance weld setters responsible for setting up and/or adjustment during welding have to be approved. Personnel exclusively performing the programming of the welding unit or operation of the welding unit do not need any particular approval. This standard is applicable when approval testing of operators/resistance weld setters is required by the contract or by the application standard. This standard does not apply to welding operators in resistance welding (see 3.10) or under hyperbaric conditions.

Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials

NF X50-761:1998 职业培训.职业培训机构.服务和服务条例.规范

Professional training. Professional training body. Service and provision of service : specifications.

NF X50-755:1998 专业培训.培训申请.培训项目详细说明的方法

Professional training. Request for training. Training project elaboration method.

ASME QRO-1b Addenda-1998 资源修复装置操作者的资格和认证

Qualification and certification of resource recovery facility operators; Addenda

JY/T 002-1996 激光喇曼光谱分析方法通则

General Rules for Laser Raman Spectroscopy Analysis Methods

WJ 2427-1997 兵器工业危险品生产企、事业职工安全技术培训与考核管理规定

Regulations on the management of safety technology training and assessment for employees of dangerous goods production enterprises and institutions in the weapon industry

NF X50-750:1996 职业培训.术语

Professional training. Terminology.

ASME QRO-1a Addenda-1996 资源回收设备操作人员的资格证书和认证的标准.修改件1

Qualification and certification of resource recovery facility operators; Addenda

WJ 2198-1994 工人技师技术考核内容和评定方法 枪弹

Technical assessment content and assessment method for workers and technicians

WJ 2202-1994 工人技师技术考核内容和评定方法 火炸药

Technical assessment content and assessment method for workers and technicians

WJ 2203-1994 工人技师技术考核内容和评定方法 光电仪器

Technical assessment content and assessment method for workers and technicians Optoelectronic instruments

WJ 2201-1994 工人技师技术考核内容和评定方法 火工品

Worker technician technical assessment content and assessment method pyrotechnics

ASME QRO-1-1994 资源回收设备操作人员的资格证书和认证的标准

Standard for the qualification and certification of resource recovery facility operators

WJ 2200-1994 工人技师技术考核内容和评定方法 引信

Worker technician technical assessment content and assessment method fuze