共找到 1168 条与 环境条件与通用试验方法 相关的标准,共 78 页
本标准规定了机械产品的寒冷环境条件的环境参数及其严酷等级。 本标准适用于GB4797.1《电工电子产品自然环境条件温度和湿度》规定的“寒冷”和“寒温I”两个气候区一般用途的机械产品,包括农机具、内燃机、工程机械、重型机械、起重运输机械、矿山机械、石化机械、电工产品、仪器仪表、机床工具、通用零部件等。 本标准不适用于寒冷地区存在爆炸危险介质、矿井等特殊环境条件下使用的产品。
Environmental condition for machinery products.Cold
本标准规定了安装在平台上不同部位处所的电工电子产品所需进行环境试验项目、试验方法及严酷等级。 本标准适用于平台用电工电子产品在制订技术条件时,对环境试验项目、试验方法及严酷等级的选定。其中有关的试验细则和考核指标在产品技术条件中规定。
General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations
本标准规定了在平台上使用的电工电子产品承受到的各类环境条件及参数分级。 本标准适用于平台用的电工电子产品在设计和制订技术条件时选定环境条件及其参数等级。
Parametric classification of environmental conditions of electric and electronic products for mobile platforms and offshore installations
本标准规定了对运输包装件进行正弦变频振动试验时所采用试验设备的主要性能要求、试验程序及试验报告的内容。 本标准适用于评定运输包装件在正弦变频振动或共振情况下的强度及包装对内装物的保护能力。它既可以作为单项试验,也可以作为一系列试验的组成部分。
Packaging--Transport packages--Sinusoidal vibration test method using a variable vibration frequency
本标准规定了编制运输包装件性能试验大纲的一般原理以及运输包装件经受性能试验后评价包装件质量时应考虑的因素。 本标准适用于编制任何一个流通系统的运输包装件性能试验大纲。
Packaging.Transport Packages.General principles for the complilation of performance test schedule
本标准规定了地面固定使用的产品在正常使用中(包括安装、停机和维修等)遇到的环境参数及其严酷等级等。 本标准适用于在正常情况下,固定安装在地面无气候防护场所使用的电工电子产品。不适用于由火、爆炸、离子辐射和其它意外的偶然事故造成的环境以及产品内部的微气候条件。
Environmental conditions existing in the application for electric and electronic products--Stationary use at non-weather-protected locations
The best linear unbiased estimation table for life test (extreme value distribution, Weibull distribution)
本标准规定了电工电子产品的自然环境条件:太阳辐射与温度。 本标准适用于电工电子产品在自然环境条件中对太阳辐射与温度等级的选择。
Environmental conditions appearing in nature for electric and electronic products--Solar radiation and temperature
本标准规定了电工电子产品基本环境试验规程:高浓度二氧化硫试验方法。 本标准适用于确定电工电子产品及其使用材料在化学腐蚀环境条件下使用的适应性。
Basic environmental testing procedures for electric and electronic products--Test Kca: High consistence sulphur dioxide test
本标准规定了电工电子产品基本环境试验规程:高温、低温试验导则。 本标准适用于电工电子产品基本环境试验的高温、低温试验。 本标准包括非散热试验样品和散热试验样品(带冷却系统和不带冷却系统)的温度突变试验和温度渐变试验的背景知识材料,作为低温和高温试验方法应用的指导。 试验设备(箱或室)可用有强迫空气循环的和无强迫空气循环的。一般对非散热试验样品采用有强迫空气循环的,而对散热试验样品多采用无强迫空气循环的。
Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
Environmental conditions for application of electrical and electronic products Portable and non-fixed use
Precision of test methods--Determination of repeatability and reproducibility for a standard test method by interlaboratory tests
本标准规定了环境试验中相对湿度的计算方法。 本标准适用于环境试验中用球状或柱状水银温度表测量干湿球温度时查算相对湿度。
Relative humidity tables for environmental test
Guidelines for service environmental assessment of electrical equipment for offshore wind turbines
Environmental testing. Tests. Test Z/AD: Composite temperature/humidity cyclic test
Environmental testing. Tests. Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads
Environmental testing -- Part 2-18: Tests -- Test R and guidance: Water
Environmental testing. Tests. Test U: Robustness of terminations and integral mounting devices
Environmental testing. Tests. Test Ka: Salt mist
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号