A26 颜色 标准查询与下载

ASTM E1708-95(2007) 颜色和外观数据的电子交换标准规范

This practice should be used by manufacturers of color-measuring instruments and developers of software when the transmission of color and appearance data is desired between instruments or computers. The method of transmission may be via direct connection, modem, or the transfer of electronic media, for example, by floppy disk transfer. The practice lends itself to the transmission of either a single record of data or multiple record files. Examples of files generated in this practice are contained in Fig. X1.1 and Fig. X2.1 of the appendixes.1.1 This practice covers procedures to be used in the electronic exchange of color and appearance data between users, by either modem or the physical transfer of electronic media. It is intended for use by manufacturers of color-measuring instruments and developers of software so that any instrument may acquire data for its use that may have been measured on an instrument of another manufacturer, at another place, or at another time. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Electronic Interchange of Color and Appearance Data

DIN-Fachbericht 49:1995 色容差协商程序

Color Tolerance Negotiation Procedure

JIS Z 8729:1994 颜色规范.国际照明委员会LAB和LUV系统的色度空间

Colour specification -- CIE LAB and CIE LUV colour spaces

JIS Z 8722:1994 颜色测定方法.反射或发射物体

Methods of colour measurement -- Reflecting or transmitting objects

DIN 6172:1993 试样对光变换条件配色指数

The document describes how to define and calculate the metamerism index, a measure for the colour-difference between two samples with identical colour with one illuminant but different spectral reflectances or transmissions resulting from a change in illuminant.#,,#

Special metamerism-index for pairs of samples at change in illuminant

JIS Z 8721:1993 颜色规范.三种属性的规范

この規格は，表面色(以下，色という。)の色知覚の三属性(色相，明度，彩度)を，尺度化して表示する方法について規定する。

Colour specification -- Specification according to their three attributes

KS A 3325-1992 根据光源显色性及染色性的荧光灯分类

이 규격은 KS C 7601에 규정하는 일반 조명용 형광 램프(이하 형광 램프라 한다)의

Classification of fluorescent lamps by chromaticity and colour rendering property

DIN 5033-2:1992 比色法.标准比色系统

The document describes the CIE 1931 and CIE 1964 standard colorimetric observers and the CIE 1931 and 1964 standard colorimetric systems. The CIE colour-matching functions are given for both systems.

Colorimetry; standard colorimetric systems

prEN 60073-1992 显示装置和致动器的颜色和辅助手段编码

Coding of indicating devices and actuators by colours and supplementary means (IEC 73:1991)

ISO/CIE 10527:1991 CIE 标准色度观测仪

Specifies two sets of colour-matching functions for use in colorimetry. Table 1 contains the functions and chromaticity coordinates of the CIE 1931 standard colorometric observer and Table 2 these of the CIE 1964 supplementary standard colorometric observer.

CIE standard colorimetric observers

KS A 3512-1991 铁路道口设施安全颜色

이 규격은 건널목을 통행하는 보행자 및 자동차 등의 운전자에게 주의를 환기하기 위해 건널목

Safety colour code for railway crossing equipment

IEC 60073:1991 用颜色和辅助手段标记指示设备和调节器

Coding of indicating devices and actuators by colours and supplementary means

JIS Z 8715:1991 白色度-表示方法

Whiteness of near-white opaque materials -- Specifying method

KS A 3601-1990 X线间接摄影灵敏度测量用光源.摄影感光材料的绿色荧光屏

이 규격은 사진 감광재료의 녹색 형광판에 의한 X 선 간접촬영 감도 측정용 광원에 대하여

Light source for determining fluorographic sensitivity of photegraphic sensitive materials used with green fluorescent screen

JIS Z 8726:1990 光源现色性能规定方法

この規格は，演色評価数を用いて一般照明用光源の演色性を評価する方法について規定する。

Method of specifying colour rendering properties of light sources

JIS Z 8718:1990 不同观测员位变异构性程度的评价方法

この規格は，基準観測者が一定の測色用の光の下で等色又はほば等色であると判断する物体色の対(以下，条件等色対という。)の観測者条件等色度を評価する方法について規定する。

Evaluation method of degree of metamerism for change in observers

ASTM E1348-90(1996) 使用分光光度法使用半球形几何结构测定透光度和颜色的标准试验方法

1.1 This test method describes the instrumental measurement of the transmission properties and color of object-color specimens by the use of a spectrophotometer or spectrocolorimeter with a hemispherical optical measuring system, such as an integrating sphere. 1.2 This test method is generally suitable for all fully transparent specimens without regard for the specimen position relative to the transmission port of the instrument. Translucent specimens, however, must be placed flush against the transmission port of the sphere. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

JIS Z 8717:1989 荧光物体颜色的测量方法

この規格は，2度視野に基づくXYZ表色系()(以下，XYZ表色系という。)及び10度視野に基づくX Y Z表色系()(以下，XYZ表色系という。)によって，蛍光性の反射物体の色(以下，色という。)を測定する方法について規定する。

Methods of measurement for colour of fluorescent objects

BS 6923:1988 小色差计算方法

Describes a method using a modification of the internationally recognized CIELAB colour difference formula.

Method for calculation of small colour differences

JIS Z 8723:1988 表面颜色比较方法

Methods of visual comparison for surface colours