A28 筛分、筛板与筛网 标准查询与下载



共找到 261 条与 筛分、筛板与筛网 相关的标准,共 18

This International Standard gives a vocabulary of selected terms which are frequently encountered in industrial screening. It refers to screening processes in which screens with screening surfaces in accordance with ISO 4783-1, ISO 4783-2, ISO 4783-3 and ISO 9044 are used. The terms defined are grouped into the following four sections: a) material to be screened; b) industrial screens; c) the screening process; d) products of screening.

Glossary of terms used in industrial screening

ICS
01.040.19;19.120
CCS
A28
发布
1991-01-31
实施
1991-01-31

Gives terms and definitions in English and French to facilitate understanding of the terminology relating to test sieves and test sieving. This second edition cancels and replaces the first edition (1972).

Test sieves and test sieving; vocabulary

ICS
01.040.19;19.120
CCS
A28
发布
1990-12
实施
1990-12-01

Test sieves. Metal wire cloth, peroforated metal plate and electroformed sheet. Nominal sizes of openings.

ICS
19.120
CCS
A28
发布
1990-11-01
实施
1990-11-20

SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.

ICS
CCS
A28
发布
1990-09
实施
1990-08-05

This International Standard gives a vocabulary of selected terms which are frequently encountered in industrial screening. It refers to screening processes in which screens with screening surfaces in accordance with ISO 4783-1, ISO 4783-2, ISO 4783-3 and ISO 9044 are used. The terms defined are grouped into the following four sections: a) material to be screened; b) industrial screens; c) the screening process; d) products of screening.

Industrial screens and screening; vocabulary

ICS
01.040.19;19.120
CCS
A28
发布
1990-07
实施
1990-07-15

This part of ISO 3310 specifies the technical re-quirements and corresponding test methods for test sieves in which the sieving medium is a metal sheet with electrochemically formed apertures. It applies to test sieves having round (circular) or square apertures ranging in size from 500 μm to 5 μm, in accordance with ISO 565.

Test sieves; technical requirements and testing; part 3: test sieves of electroformed sheets

ICS
19.120
CCS
A28
发布
1990-07
实施
1990-07-15

この規格は,鏡面状平面基板(以下,ウエーハという。)上に付着した粒子状汚染物質(以下,粒子という。)の粒径及び個数を光学的に測定する表面付着粒子計数器(以下,計数器という。)について規定する。

Surface particle counters

ICS
19.120
CCS
A28
发布
1990-03-01
实施

This method is for determining the packed apparent bulk density (ABD) of molecular sieves on an as-received basis. Apparent bulk density is an empirical value defined as mass per unit volume, which includes the void spaces between the particles, and is reported as grams per milliliter.

Packed Apparent Bulk Density of Molecular Sieves

ICS
CCS
A28
发布
1990
实施

A guide to test sieving procedures. Formulates general principles of sieving applicable to many natural and artificial materials.

Test sieving. Methods using test sieves of woven wire cloth and perforated metal plate

ICS
19.120
CCS
A28
发布
1989-09-29
实施
1989-09-29

Test sieving. Part 1 : methds using test sieves of woven wire cloth and perforated metal plate.

ICS
19.120
CCS
A28
发布
1989-09-01
实施
1989-09-05

Tabulates a comprehensive range from which preferred groups of combinations may be chosen. The percentage open area of each combination is stated. The screens shall be designated in the following sequence by a) width of aperture, b) diameter of wire, c) material of wire, d) type of weave or type of crimp.

Industrial wire screens and woven wire cloth; guide to the choice of aperture size and wire diameter combinations; part 1: generalities

ICS
19.120;77.140.65
CCS
A28
发布
1989-04
实施
1989-04-15

Tabulates values which are taken from the general list of combinations given in ISO 4783/1. Applies to aperture sizes from 16 mm to 0.02 mm. The wire cloth shall be designated in the following sequence by a) width of aperture, b) diameter of wire, c) material of wire, d) type of weave.

Industrial wire screens and woven wire cloth; guide to the choice of aperture size and wire diameter combinations; part 2: preferred combinations for woven wire cloth

ICS
19.120;77.140.65
CCS
A28
发布
1989-04
实施
1989-04-15

Describes the main factors affecting test sieving and the results obtained. Specifies general principles to be followed concerning apparatus, procedure and presentation of results. Applies to methods in which test sieves of woven wire cloth or perforated metal plate are used. This edition of ISO 2591-1 cancels and replaces in part ISO 2591:1973.

Test sieving; part 1: methods using test sieves of woven wire cloth and perforated metal plate

ICS
19.120
CCS
A28
发布
1988-12
实施
1988-12-01

SIEVES AND SIEVING. INDUSTRIAL WIRE SCREENS. TOLERANCES.

ICS
19.120
CCS
A28
发布
1988-06
实施
1988-05-05

Sieves, Testing, Woven Wire, Metric

Sieves, Testing, Woven Wire, Metric

ICS
CCS
A28
发布
1988-04-01
实施

The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this sta

Sieves, Testing, Woven Wire, Inch Series

ICS
CCS
A28
发布
1988-03-01
实施

Describes three patterns using round (circular) and square perforations. The sizes of holes range down to 2 mm for square holes and to 0.5 mm for round holes. Five ratios of pitch to hole are specified which result in nominal open areas ranging from about 60 % to 23 %.

Industrial plate screens; Part 2 : Thickness below 3 mm

ICS
19.120
CCS
A28
发布
1987-12
实施

Specifies the diameters and the requirements and also tolerances and testing. Applies to wire with circular cross-section from 25 to 0.02 mm in diameter. The second edition cancels and replaces the first edition (ISO 4782:1981).

Metal wire for industrial wire screens and woven wire cloth

ICS
19.120;77.140.65
CCS
A28
发布
1987-11
实施

This standard specifies the conditions for executing test sieving. It embodies rules for the determination of the aperture width distribution and the cut size of test sieves. Furthermore hints are given how to consider analysis faults and as well as recommandations about care and control of test sieves.

Particle size analysis; sieve analysis; general principles

ICS
19.120
CCS
A28
发布
1987-04
实施

This standard specifies the methods of test sieving procedure. In test sieving methods hand and machine sieving is distinguished as well as dry and wet sieving. Due to the numerous kinds of test sieving machines used in practice, detaillied rules can be given for the hand sieving methods only. The various sieving methods are differentiated according to the particle size which are to determined, by the sieving time, the kind of sieve movement and by the choice of the sieves and the auxiliary equipment.#,,#

Particle size analysis; sieve analysis; procedure

ICS
19.120
CCS
A28
发布
1987-04
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号