A50 计量综合 标准查询与下载

ISO 12780-2:2011 产品几何技术规范(GPS).平直度.第2部分:操作规范

This part of ISO 12780 specifies the complete specification operator for straightness of integral features only and covers complete straightness profiles only, i.e. geometrical characteristics of features of type line. NOTE Straightness of an extracted median line of a cylinder is defined in ISO 12180-1.

Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators

ISO 12181-2:2011 产品几何量技术规范(GPS).圆形.第2部分:规范操作人员

This part of ISO 12181 specifies the complete specification operator for roundness of integral features only and covers complete roundness profiles only, i.e. geometrical characteristics of features of the type circle.

Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators

ISO 12781-1:2011 产品几何技术规范(GPS).平整度.第1部分:平整度的词汇和参数

This part of ISO 12781 defines the terms and concepts related to flatness of individual complete integral features only.

Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness

DIN EN ISO 14406:2011 产品几何量技术规范(GPS).提取(ISO 14406-2010);德文版本EN ISO 14406-2010

This international document specifies the basic terminology for GPS data extraction. It defines a framework for the fundamental operations used in GPS extraction and introduces the concepts of sampling and reconstruction for extration, together with some principal sampling schemes on several basic geometries.

Geometrical product specifications (GPS) - Extraction (ISO 14406:2010); German version EN ISO 14406:2010

BS EN ISO 14405-1:2010 产品几何技术规范(GPS).尺寸公差.线性尺寸

Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes

JJG 1265-2010 生物计量相关术语及定义技术规范

Biometric related terms and definitions technical specification

DB37/T 1806-2011 在用机动车燃油加油机检验规则

In-use motor vehicle fuel tanker inspection rules

ANSI/ASTM E2782:2011 测量系统分析(MSA)用指南

Guide for Measurement Systems Analysis (MSA)

ASTM E2782-11 测量系统分析标准指南(MSA)

Many types of measurements are made routinely in research organizations, business and industry, and government and academic agencies. Typically, data are generated from experimental effort or as observational studies. From such data, management decisions are made that may have wide-reaching social, economic, and political impact. Data and decision making go hand in hand and that is why the quality of any measurement is importantfor data originate from a measurement process. This guide presents selected concepts and methods useful for describing and understanding the measurement process. This guide is not intended to be a comprehensive survey of this topic. Any measurement result will be said to originate from a measurement process or system. The measurement process will consist of a number of input variables and general conditions that affect the final value of the measurement. The process variables, hardware and software and their properties, and the human effort required to obtain a measurement constitute the measurement process. A measurement process will have several properties that characterize the effect of the several variables and general conditions on the measurement results. It is the properties of the measurement process that are of primary interest in any such study. The term “measurement systems analysis” or MSA study is used to describe the several methods used to characterize the measurement process. Note 18212;Sample statistics discussed in this guide are as described in Practice E2586; control chart methodologies are as described in Practice E2587.1.1 This guide presents terminology, concepts, and selected methods and formulas useful for measurement systems analysis (MSA). Measurement systems analysis may be broadly described as a body of theory and methodology that applies to the non-destructive measurement of the physical properties of manufactured objects. 1.2 Units8212;The system of units for this guide is not specified. Dimensional quantities in the guide are presented only as illustrations of calculation methods and are not binding on products or test methods treated. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Measurement Systems Analysis (MSA)

KS Q 0001-2010 计量标准型1次取样检查方法(已知的标准偏差)

이 표준은 표준편차를 알 때 상한 또는 하한 표준 중 한쪽만 규정한 경우에 로트의 불량률을

Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)

KS A ISO 80000-4:2010 数量和单位.第4部分:力学

이 표준은 고전 역학의 양과 단위에 대한 명칭, 기호 및 정의에 대하여 규정하고 있다. 또

Quantities and units-Part 4:Mechanics

KS A ISO 80000-3:2010 数量和单位.第3部分:空间和时间

이 표준은 공간과 시간의 양과 단위에 대한 명칭, 기호 및 정의에 대하여 규정하고 있다.

Quantities and units-Part 3:Space and time

KS A 0085-2010 同色异谱的不同观测者目视评估结果的鉴定方法

이 표준은 기준 관측자가 일정한 측색용 광 아래에서 등색 또는 거의 등색이라고 판단하는 물

Evaluation method for degree of metamerism for change in observers

DB45/T 685-2010 米粉餐饮服务计量管理规范

Measuring management specification for rice noodle catering service

NF X06-067:2010 测量不确定估计的重复性,再现性和真实评估值的使用指南.

Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation.

BS ISO 21748:2010 测量不确定性估算中可重复性,再现性和准确性估算用导则

Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation

JJF 1071-2010 国家计量校准规范编写规则

本规程适用于编写国家计量校准规范。各类实验室校准规范可参照编写。

The Rules for Drafting National Calibration Specification

JJF 1265-2010 生物计量相关术语及定义

本规范规定了生物计量术语及其定义,供生物计量相关技术法规制修订、生物领域计量工作和相关科技方面参考使用。

Terms and Definitions for Biometrology

ISO 21748:2010 测量不确定估计的重复性,再现性和真实评估值的使用指南

The International Standard gives guidance for -evaluation of measurement uncertainties using data obtained from studies conducted in accordance with ISO 5725-2:1994; -comparison of collaborative study results with measurement uncertainty (MU) obtained using formal principles of uncertainty propagation (see Clause 13). ISO 5725-3:1994 provides additional models for studies of intermediate precision. However, while the same general approach may be applied to the use of such extended models, uncertainty evaluation using these models is not incorporated in the present International Standard. This International Standard is applicable in all measurement and test fields where an uncertainty associated with a result has to be determined. This International Standard does not describe the application of repeatability data in the absence of reproducibility data. This International Standard assumes that recognized, non-negligible systematic effects are corrected, either by applying a numerical correction as part of the method of measurement, or by investigation and removal of the cause of the effect. The recommendations in this International Standard are primarily for guidance. It is recognized that while the recommendations presented do form a valid approach to the evaluation of uncertainty for many purposes, it is also possible to adopt other suitable approaches. In general, references to measurement results, methods and processes in this International Standard are normally understood to apply also to testing results, methods and processes.

Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation

DB13/T 1268-2010 冬季采暖期居民室内空气温度测定方法

本标准规定了冬季采暖期居民室内空气温度（简称气温）测定的环境条件、操作方法等。本标准适用于冬季采暖期居民室内气温的测定，其它非居民建筑中，其房屋体积、结构类似居民建筑的可参照执行。

Method for measuring indoor air temperature of residents in winter heating period