A60 光学计量 标准查询与下载

JJG 383-2002 光谱辐射亮度标准灯检定规程

Verification Regulation of Spectral Radiance Standard Lamps

JJG 512-2002 白度计检定规程

Verification Regulation of the Whiteness Meters

JJG(民航) 0066-2001 RDX-7708型气象雷达测试仪

RDX-7708 Weather Radar Test Set

JJG 967-2001 机动车前照灯检测仪校准器检定规程

Verification Regulation of Calibrators for Headlamp Tester of Motor Vehicle

JJG 963-2001 通信用光波长计检定规程

Verification Regulation of Optical Wavelength Counters in Telecommunication

ASTM E334-01 红外线微量分析的一般技术的标准操作规程

1.1 This practice covers techniques that are of general use in securing and analyzing microgram quantities of samples by infrared spectrophotometric techniques. This practice makes repetition of description of specific techniques unnecessary in individual infrared methods. 1.2 These recommendations are supplementary to Practices E168, E573, and E1252, which should be referred to for theory, general techniques of sample preparation, and calculations.

Standard Practice for General Techniques of Infrared Microanalysis

JJG 965-2001 通信用光功率计检定规程

Verification Regulation of Optical Power Meter in Telecommunication

JJG 959-2001 光时域反射计OTDR检定规程

Verification Regulation of Optical Time Domain Reflectometer

ASTM E334-01(2007) 红外线微量分析的一般技术的标准操作规程

1.1 This practice covers techniques that are of general use in securing and analyzing microgram quantities of samples by infrared spectrophotometric techniques. This practice makes repetition of description of specific techniques unnecessary in individual infrared methods.1.2 These recommendations are supplementary to Practices E 168, E 573, and E 1252, which should be referred to for theory, general techniques of sample preparation, and calculations.

Standard Practice for General Techniques of Infrared Microanalysis

JIS Z 8720:2000 测色用标准发光体及标准光源

この規格は，物体色の測色に用いる標準ィルミナント及び補助標準イルミナント(補助標準の光)並びに標準光源及び常用光源について規定する。

Standard illuminants and sources for colorimetry

BS ISO 17166:2000 红斑参考作用光谱和标准红斑剂量

This Standard specifies the erythema reference action spectrum (Se,(λ)), and the Standard Erythema Dose (SED).

Erythema reference action spectrum and standard erythema dose

JJG 958-2000 光传输用稳定光源检定规程

Verification Regulation of Stabilized Laser Sources for Optical Transmit

JJG 952-2000 瞳距仪检定规程

Verification Regulation of Pupil Distance Meters

ASTM E1709-00e1 使用便携式后向反射计测量后向反射信号的标准试验方法

Measurements made by this test method are related to the night time brightness of retroreflective traffic signs approximately facing the driver of a mid-sized automobile equipped with tungsten filament headlights at about 200 m distance. Retroreflective material used on traffic signs degrades with time and requires periodic measurement to ensure that the performance of the retroflection provides adequate safety to the driver. The quality of the sign as to material used, age, and wear pattern will have an effect on the coefficient of retroreflection. These conditions need to be observed and noted by the user. This test method is not intended for use for the measurement of signs when the instrument entrance and observation angles differ from those specified herein.1.1 This test method covers measurement of the retroreflective properties of sign materials such as traffic signs and symbols (vertical surfaces) using a portable retroreflectometer that can be used in the field. The portable retroreflectometer is a hand-held instrument with a defined standard geometry that can be placed in contact with sign material to measure the retroreflection in a standard geometry. The measurements can be compared to minimum requirements to determine the need for replacement. Entrance and observation angles specified in this test method are those used currently in the United States and may differ from the angles used elsewhere in the world. 1.2 This test method is intended to be used for the field measurement of traffic signs but may be used to measure the performance of materials before placing the sign in the field or before placing the sign material on the sign face. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer

ASTM E1709-00 使用便携式后向反射计测量后向反射信号的标准试验方法

1.1 This test method covers measurement of the retroreflective properties of sign materials such as traffic signs and symbols (vertical surfaces) using a portable retroreflectometer that can be used in the field. The portable retroreflectometer is a hand-held instrument with a defined standard geometry that can be placed in contact with sign material to measure the retroreflection in a standard geometry. The measurements can be compared to minimum requirements to determine the need for replacement. Entrance and observation angles specified in this test method are those used currently in the United States and may differ from the angles used elsewhere in the world. 1.2 This test method is intended to be used for the field measurement of traffic signs but may be used to measure the performance of materials before placing the sign in the field or before placing the sign material on the sign face. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer

BS ISO 4037-3:1999 校准剂量仪和剂量率仪及确定其光子能量响应的X 和γ标准辐射.场所剂量仪和个人剂量仪的校准及其能量响应和角响应的确定

This part of ISO 4037 specifies the calibration of dosemeters and doserate meters used for individual and for area monitoring in photon reference radiation fields with mean energies between 8 keV and 9 MeV (see ISO 4037-1). For individual monitoring, both whole body and extremity dosemeters are covered and for area monitoring both portable and installed dosemeters are covered. This part of ISO 4037 also deals with the determination of the response as a function of photon energy and angle of radiation incidence. Such measurements may represent part of a type test in the course of which the effect of further influence quantities on the response is examined. This part of ISO 4037 does not cover the in-situ calibration of fixed installed area dosemeters which will be covered in a future standard. The procedures to be followed for the different types of dosemeters are described. Recommendations are given on the phantom to be used and on the conversion coefficients to be applied. In addition, this International Standard gives guidance on the statement of uncertainties and on the preparation of calibration records and certificates. NOTE 1 The term dosemeter is used as a generic term denoting any dose or doserate meter for individual or area monitoring. NOTE 2 Throughout this part of ISO 4037, unless otherwise stated, the term kerma is used to denote air kerma free in air.

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Calibration of area and personal dosemeters and the measurement of their response as a function of energy and

JIS C 6188:1999 测量光学衰减的试验方法

この規格は，光ファイバを用いた光伝送系の測定に使用する測定用光減衰器の試験方法について規定する。

Test methods of measuring optical attenuators

DIN 5032-1:1999 光度测量.第1部分:测量方法

The document applies to the measurement of lighting quantities of lamps, luminaires and artical lighting. For this purpose the quantities and the photometric methods are described. The types of instruments are given for the measurement of quantities with spatial distribution and their representation.#,,#

Photometry - Part 1: Methods of measurement

JIS Z 8781:1999 CIE标准比色光源

この規格は，測色に用いる測色用の光の相対分光分布を規定する。

CIE standard colorimetric illuminants

JIS Z 8782:1999 CIE标准比色观察仪

この規格は，測色で使用する等色関数を規定し，次の2種類の等色関数を定める。

CIE standard colorimetric observers