B60 林业基础标准与通用方法 标准查询与下载

DB37/T 037-1990 苹果综合标准术语

本标准规定了苹果综合标准中涉及的主要名词，术语的概念和规范化的解释，适用于苹果生产、科研、教学及制订单项技术标准时参考

Apple Comprehensive Standard Terminology

LY/T 1350-1999 指接材物理力学性能试验方法

Test methods for physical and mechanical properties of finger-jointed lumber

ISO 4474:1989 针叶树和阔叶树锯材原木 可见缺陷 术语和定义 三种语言版

Refers to ISO 4473 and is a trilingual edition. Examples are illustrated in six figures. Includes an alphabetical index in English, French and Russian.

Coniferous and broadleaved tree sawlogs; visible defects; terms and definitions

ISO 2386:1988 软木厚板、软木料、软木栓皮、碎栓皮、软木下脚料和废软木塞.水分含量的测定

Corkwood in planks, virgin cork, ramassage, gleanings, corkwood refuse and corkwaste; determination of moisture content

ISO 8906:1988 锯材 试验方法 横向局部抗压的测定

This method is based on the load proportional limit and the load at a defined deformation which are given in the "load/deflection" curve. Stresses at these loads are calculated. Testing of small defect-free test pieces of wood is not covered.

Sawn timber; test methods; determination of resistance to local transverse compression

ISO 8966:1987 采伐工业 产品 术语和定义 三种语言版

Covers products used in various fields, e.g. logs for the pulp and paper industry, board production and chemical processing as well as fuel-woods. Is a trilingual edition and includes an alphabetical index in English, French, and Russian.

Logging industry; Products; Terms and definitions Trilingual edition

ISO 8965:1987 采伐工业 工艺 术语和定义 三种语言版

Relates to production operations. The standard is a trilingual edition and includes an alphabetical index in English, French and Russian.

Logging industry; Technology; Terms and definitions Trilingual edition

ISO 9086-1:1987 木材 物理力学试验方法 词汇 第1部分:一般概念和宏观结构 三种语言版

Gives terms and definitions relating to physical and mechanical properties of wood. Wood is defined as aggregate of secondary tissues (conductive, mechanical and storing) found in stems, branches and roots of woody plants between the bark and pith.

Wood; Methods of physical and mechanical testing; Vocabulary; Part 1 : General concepts and macrostructure Trilingual edition

LY/T 1440-1999 森林资源代码.林业行政区划

Codes for forest resources.Forestry administrative divisions

LY/T 1441-1999 森林资源代码.林业区划

Codes for forest resources.Forestry divisions

LY/T 1438-1999 森林资源代码.森林调查

Codes for forest resources.Forest inventory

LY/T 1439-1999 森林资源代码.树种

Codes for forest resources.Species of trees

Silos-1987 筒仓、收藏室、燃料库和贮煤器草案设计规程

Published by BSI in association with the British Materials Handling Board.

Draft design code for silos, bins, bunkers and hoppers

ISO 633:1986 软木 词汇 两种语言版

Constitutes a technical revision of ISO Recommendation R 633-1967. Determines and defines the terms to be used in describing the various states in which cork may be found and the principal products manufactured therefrom. Terms and definitions and an alphabetical index are given in English and French.

Cork; Vocabulary Bilingual edition

DIN 4076-1:1985 木材领域的术语和符号.第1部分:木材种类

The standard lists for 257 species of softwood (conventionally, timber of coniferous trees) and hardwood (conventionally, broad-leaved trees) in normal commercial usage the standard names, symbols, trade names, botanical names, density, and sources of supply.#,,#

Terms and symbols in the field of wood; species of wood

ISO 4480:1983 针叶树锯材原木 尺寸测量和体积的测定

The vocabulary given in ISO 4476 applies to the methods specified. The thickness shall be taken as the middle diameter or the diameter of the upper end. The length shall be measured in metres, rounded to two decimal places. The volume shall be determined in cubic metres to two decimal places.

Coniferous sawlogs; Measurement of sizes and determination of volume

ISO 4476:1983 针叶树和阔叶树锯材原木 尺寸 词汇 三种语言版

The terms and definitions include the different types of ends, of diameters and other dimensions. This standard is a trilingual edition.

Coniferous and broadleaved sawlogs; Sizes; Vocabulary Trilingual edition

ISO 4859:1982 木材 径向和强向膨胀的测定

Specifies a method which determines the linear swelling of test pieces after drying at a moisture content in equilibrium with the normal environment and at a moisture content, equal to or greater than the saturation point of the cellular walls of wood.

Wood; Determination of radial and tangential swelling

ISO 4860:1982 木材 体积膨胀的测定

Two methods are specified: the stereometric method used for test pieces made in accordance with ISO 4859, and the mercury volumenometer method used for test pieces of any shape. Determines the change in volume of test pieces after drying, at a moisture content in equilibrium with the normal environment and at a moisture content, equal to or greater than the saturation point of the cellular walls of wood.

Wood; Determination of volumetric swelling

ISO 4858:1982 木材 体积收缩率的测定

Two methods are specified: the stereometric method used for test pieces made in accordance with ISO 4469, and the mercury volumenometer method used for test pieces of any shape. References are made to ISO 3129, ISO 3130, and ISO 4469.

Wood; Determination of volumetric shrinkage