B69 木材加工材 标准查询与下载

BS EN 975-2:2004 锯木.硬木锯材的目测分级.白杨木

This standard defines appearance grades for European poplars The standard applies to dry and green sawn timber, of thickness 15 mm up to 34 mm and of width 100 mm up to 250 mm measured in a green state. This standard does not apply to the strength grading of structural timber.

Sawn timber - Appearance grading of hardwoods - Part 2: Poplars

LY/T 1656-2006 实木包装箱板

本标准规定了实木包装箱板的树种、尺寸、材质的技术要求和检验检疫方法。 本标准适用于普通包装箱及部分框架包装箱所用的实木包装箱板，不包括指接材包装箱板。特殊尺寸及用途的实木包装箱板也可参照本标准。

Solid wood package hoard

BS PD CEN/TR 15314:2006 木材和木基制品的耐久性.木材中季胺化合物的定量测定

This CEN Technical Report specifies a laboratory method of determining the content of quaternary ammonium compounds in commercially QAC-treated wood. The method described has a measurement range up to QAC contents of 1 500 mg/kg of dry matter. NOTE 1 This method may need some modifications with some wood species such as hardwoods. NOTE 2 It is applicable to QAC with a molar mass ranging between 200 g/mol and 500 g/mol. NOTE 3 The method has a quantification limit corresponding to 250 mg of QAC per kilogram of wood expressed as dry matter.

Durability of wood and wood-based products — Quantitative determination of quaternary ammonium compounds in wood

JIS A 5741 ERRATUM 1:2006 勘误

ERRATUM

BS 5268-3:2006 建筑用木材.桁架拱屋顶用实施规则

This part of BS 5268 provides guidance on the design, fabrication and use of trussed rafters for roofs in service classes 1 and 2 as defined in 3.1 and 3.2. Guidance is provided on structural analysis methods, engineering design criteria and design by testing. Performance requirements for roof bracing are given, together with standard bracing arrangements for domestic scale roofs. Production requirements are also given for truss manufacture, along with guidance on their handling, storage and erection. Maximum spans for two common truss configurations for a range of member sizes and roof pitches are given, based on extensive tests.

Structural use of timber - Code of practice for trussed rafter roofs

AS 5068:2006 木材.结构产品中指形接合.制造要求

specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members. Requirements are also given for timber, adhesive, moisture content, cutting, bonding, pr

Timber - Finger joints in structural products - Production requirements

AS 5069:2006 木材.非结构产品中指形接合.制造要求

Specifies minimum requirements for the manufacture of bonded finger joints in non-structural timber products. Requirements are given for timber, adhesive, cutting, bonding, preservative treatments and flame-retardant treatments.

Timber - Finger joints in non-structural products - Production requirements

NF P21-500-2:2006 木材结构.带矩形截面的强度分级的结构木材.第2部分:机械分级.初始型号试验附加要求

Timber structures - Strength graded structural timber with rectangular cross section - Part 2 : machine grading - Additional requirements for initial type testing.

NF P21-500-3:2006 木材结构.带矩形截面的强度分级的结构木材.第3部分:机械分级.工厂生产控制附加要求

Timber structures - Strength graded structural timber with rectangular cross section - Part 3 : machine grading - Additional requirements for factory production control.

NF P21-500-1:2006 木材结构.带矩形截面的强度分级的结构木材.第1部分:一般要求

Timber structures - Strength graded structural timber with rectangular cross section - Part 1 : general requirements.

JIS A 5741:2006 木材-塑料再循环合成物

この規格は，主に建材に使用する木材?プラスチック再生複合材（以下,再生複合材という。)の原料に用いるリサイクル材の種類及び配合割合，並びに，再生複合材に要求される基木的物性及びその試験方法について規定する。

Wood-plastic recycled composite

BS EN 14081-1:2005+A1:2011 木结构.带矩形横截面的强度分级结构木材.一般要求

This European Standard specifies the requirements for visual and machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336. This European Standard covers structural rectangular timber, untreated or treated against biological attack. This European Standard does not cover timber treated by fire retardant products. This European Standard identifies as a minimum the characteristics for which limits shall be given in visual grading rules. Finger jointed timber is not covered in this European Standard.

Timber structures. Strength graded structural timber with rectangular cross section. General requirements

DIN EN 14519:2006 实心软木镶板和覆层.带舌簧和凹槽的机械剖面.德文版本 EN 14519-2005

This European Standard specifies the characteristics of solid wood panelling and cladding with tongue and groove machined from the following most common European species of softwood: spruce/fir, pine, larch, European Douglas Fir and maritime pine. Products are intended for interior or exterior use.#,,#

Solid softwood panelling and cladding - Machined profiles with tongue and groove; English version of DIN EN 14519:2006-03

DIN-Fachbericht CEN/TR 15314:2006 木材和木基产品的耐久性.木材中季铵化合物的定量测定

Durability of wood and wood-based products - Quantitative determination of quaternary ammonium compounds in wood; English version CEN/TR 15314:2006

BS EN 14081-3:2005 木结构.带矩形横截面的强度分级结构木材.第3部分:机械分级.工厂生产控制的附加要求

This European Standard specifies requirements additional to those given in EN 14081-1 for factory production control of machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336.

Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control

BS EN 14081-2:2005 木结构.带矩形横截面的强度分级的结构木材.第2部分:机械分级.初始类型测试的附加要求

This European Standard specifies requirements, additional to those in EN 14081-1, for initial type testing of machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336. This includes requirements for strength grading machines and test equipment for proof loading graded material, and optional requirements for control planks to test the dynamic performance of grading machines.

Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing

BS EN 408:2003 木材结构.结构木材和胶合板木材.某些物理和机械特性的测定

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength. In addition, the determination of dimensions, moisture content, and density of test pieces are specified. The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber.

Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties

BS DD CEN/TS 15087:2005 屋顶用已装粘土和混凝土嵌合瓦片的抗隆起性测定.机械紧固件的试验方法

This Technical Specification specifies a test method for determining the strength and uplift resistance of fasteners for clay and concrete interlocking tiles for roofing. NOTE 1 The results of this test may be used to determine the uplift force which can be withstood by the fastener; e.g. to withstand wind force. NOTE 2 When the results of the test method for mechanical fasteners have a correlation to the results of the roof system test method [EN 14437] they can be used to establish the uplift resistance of installed clay and concrete tiles for roofing. The test method is applicable to mechanical fasteners such as clips, hooks, screws and nails. It is not applicable to fasteners which hold down more than one tile.

Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing — Test method for mechanical fasteners

DIN 68368:2006 楼梯用硬木锯材.质量要求

This standard applies to sawn hardwood (oak, beech or other wood of equal suitability) for the construction of stairs.#,,#

Sawn hardwood for stairbuilding - Quality requirements

ISO 21128:2006 软木塞.氧化残留物测定.碘滴定法

This International Standard specifies an iodometric titration method for determining the oxidizing residues released by cork stoppers ready to use.

Cork stoppers - Determination of oxidizing residues - Iodometric titration method