B69 木材加工材 标准查询与下载

DD CEN/TS 13354:2003 实心木制板材.粘结质量.试验方法

This Technical Specification specifies a test method for determining the bonding quality of single-layer and multilayer solid wood panels by a shear test.

Solid wood panels. Bonding quality. Test method

BS DD CEN/TS 13810-2:2003 木质板材.架空地板.试验方法

This Technical Specification specifies test methods for loading a continuously fully supported non-structural floating floor with static concentrated point loads, alternating loads and dynamic impact loads for determining the values of the resulting deflections. NOTE These test methods form part of the basis for classification of floating floor constructions. The requirements, i.e. load values, number of load cycles, and deflection limits for the different load categories, are given in EN 13810-1.

Wood-based panels. Floating floors. Test methods

BS EN 13556:2003 圆木和锯材.欧洲用木材的命名

This European Standard lists commercial hardwood and softwood timbers used in Europe.

Round and sawn timber - Nomenclature of timbers used in Europe

NF B53-657:2003 木地板.多层拼花地板构件

Wood flooring - Multi-layer parquet elements.

NF B53-656*NF EN 13488:2003 木地板.镶嵌拼花地板构件

Wood flooring - Mosaic parquet elements.

NF B53-660:2003 木地板.实木拼花地板制品

Wood flooring - Solid lamparquet products.

ISO 16978:2003 木质板材.抗弯弹性模量和抗弯强度的测定

This International Standard specifies a method for determining the apparent modulus of elasticity and bending strength of wood-based panels in flatwise bending.

Wood-based panels - Determination of modulus of elasticity in bending and of bending strength

DIN CEN/TS 13810-2:2003 木基板材.浮式地板.第2部分:试验方法

This Technical Specification specifies test methods for loading a continuously fully supported non-structural floating floor with static concentrated point loads, alternating loads and dynamic impact loads for determining the values of the resulting deflections. NOTE: These test methods form part of the basis for classification of floating floor constructions. The requirements, i.e. load values, number of load cycles, and deflection limits for the different load categories, are given in prEN 13810-1.#,,#

Wood-based panels - Floating floors - Part 2: Test methods; German version CEN/TS 13810-2:2003

BS EN 13353:2003 实心木制板材(SWP).要求

This European Standard specifies requirements for solid wood panels as defined in EN 12775 for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of ENV 1995-1-1:1993. Additional information on supplementary properties for certain applications is also given.

Solid wood panels (SWP) - Requirements

DIN 4074-5:2003 木材强度等级.第5部分:硬木锯材

This standard is applicable for sawn hard wood for components, which must be measured according to their strength. It specifies grading characteristics and classes as a precondition for the specification and application of calculation values for the verification of limiting strength and usability according to DIN 1052 or Din 1074. Grading may be done by two methods : - visually with grading classes ( according to clause 5) - machine grading with strength classes (according to clause 6). For special use of timber special standards are applicable regarding the strength grading : DIN 68326 and DIN EN 131-2 for wooden ladders, DIN 15147 for flat pallets.

Strength grading of wood - Part 5: Sawn hard wood

DIN 4074-3:2003 木材强度分级.第3部分:锯木木材用分级机要求和试验

This standard specifies requirements and test methods for grading machines for sawn timber according to DIN 4074-1 and DIN 4074-5. Th purpose of this method is to ensure the correct operation of these grading machines.

Strength grading of wood - Part 3: Grading machines for sawn timber, requirements and testing

DIN 4074-1:2003 木材强度分级.第1部分:针叶锯木木材

This standard is applicable for coniferous sawn timber for components, which must be measured according to their strength. It specifies grading characteristics and classes as a precondition for the specification and application of calculation values for the verification of limiting strength and usability according to DIN 1052 or Din 1074. Grading may be done by two methods : - visually with grading classes ( according to clause 6) - machine grading with strength classes (according to clause 7). For special use of timber special standards are applicable regarding the strength grading : DIN 68326 and DIN EN 131-2 for wooden ladders, DIN 15147 for flat pallets.

Strength grading of wood - Part 1: Coniferous sawn timber

DIN 4074-4:2003 木材强度分级.第4部分:机械适用性等级合格证

This standard specifies how the suitablility for machine strength grading has to be certified. With this certification it shall be ensured that firms, which practice machine grading according to DIN 4074-1 and DIN 4074-5, have the required suitability.

Strength grading of wood - Part 4: Certificate of suitability for machine grading

ISO 16983:2003 木质板材.浸水后厚度膨胀的测定

This International Standard specifies a method for determining the swelling in thickness of flat-pressed or drum-pressed particleboards, fibreboards, OSB, and cement-bonded particleboards, after immersion in water.

Wood-based panels - Determination of swelling in thickness after immersion in water

ISO 16985:2003 木质板材.随相对湿度改变板材尺寸变化的测量

This International Standard specifies a method for the determination of dimensional changes in wood-based panels, due to variations in relative humidity.

Wood-based panels - Determination of dimensional changes associated with changes in relative humidity

ISO 16979:2003 木质板材.含水量的测定

This International Standard specifies a method for determining the moisture content of wood-based panels.

Wood-based panels - Determination of moisture content

ISO 16984:2003 木质板材.板的垂直面拉伸强度的测定

This International Standard specifies a method for determining the resistance to tension perpendicular to the plane of the panel, also known as "internal bond", of particleboards, OSB, fibreboards, and cement-bonded particleboards.

Wood-based panels - Determination of tensile strength perpendicular to the plane of the panel

DIN 68364:2003 木材特性.密度、弹性模量和强度

This Standard includes characteristic values of the density, bending modulus of elasticity and certain strength parameters determined on small sound samples conditioned at standard atmosphere and serves to compare different wood species. The characteristic strength and elasticity values are not directly applicable to structural timber, to that see DIN EN 388. Shrinkage and swelling dimensions see DIN 68100. Natural durability and treatability see DIN EN 350-2, symbols see DIN EN 13556.#,,#

Properties of wood species - Density, modulus of elasticity and strength

DIN EN 1611-1:2002 锯材.软木的表面分级.第1部分:欧洲云杉、冷杉、松树、花旗松和落叶松 (包括修改件 1:2002); 德文版本 EN 1611-1:1999 + A1:2002

This amendment gives the information that this standard applies also to European larches.

Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas firs and larches (including amendment 1:2002); German version EN 1611-1:1999 + A1:2002

LY/T 1504-2002 脚手杆

本标准规定了脚手杆的树种、尺寸、缺陷限度及检验方法等内容。 本标准适用于供建筑、维修、施工搭架使用的竖杆和横杆。

Scaffold