B70 人造板 标准查询与下载

LY/T2061-2012 木质模压工业托盘

Wood-based molding for industry pallet

LY/T 2061-2012 木质模压工业托盘

本标准规定了木质模压工业托盘的术语和定义、分类、要求、测量和试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于木质模压工业托盘。

Wood-based molding for industry pallet

LY/T2062-2012 防虫胶合板

Insect resistant plywood

BS EN 14272:2011 胶合板.一些机械特性的的计算方法

Plywood. Calculation method for some mechanical properties

ANSI O5.2-2012 公用事业建筑用建筑层压胶合板

Covers requirements for manufacturing and quality control of structural glued laminated timber of Southern Pine, Coast Region Douglas Fir, Hem Fir and other species of similar treatability for electric power and communication structures. The requirements are based on those in American National Standard for Structural Glued Laminated Timber, ANSI/AITC A190.1.

Structural Glued Laminated Timber for Utility Structures

ANSI A135.4-2012 基础硬质纤维板

The purpose of this Standard is to estblish a nationally recognized voluntary consensus standard for basic hardboard, which can serve as a common basis for understanding among those manufacturing, specifying or using hardboard products.

Basic Hardboard

ASTM D7336/D7336M-12 蜂窝夹芯结构堆芯材料的静能吸收性能的标准试验方法

Sandwich honeycomb core materials are used extensively in energy absorption applications, due to their ability to sustain compressive loading while being crushed. Proper design of energy absorption devices utilizing sandwich honeycomb core materials requires knowledge of the compressive crush stress and crush stroke properties of the honeycomb core material. The procedures contained within this standard are intended to assess the crush stress and crush stroke properties of the sandwich honeycomb core material under static compressive loading. The dynamic crush stress of the honeycomb core material may vary from that measured under static loading, depending upon factors such as honeycomb core material thickness, core material density, impact velocity, etc. This test method provides a standard method of obtaining the compressive crush stress and crush stroke for sandwich honeycomb core material structural design properties, material specifications, research and development applications, and quality assurance. This test method is not intended for use in crush testing of stabilized honeycomb core materials (for which the facing plane surfaces of the honeycomb core material are dipped in resin to resist local crushing) or sandwich specimens (for which facings are bonded to the honeycomb core material). Factors that influence the compressive crush stress and crush stroke and shall therefore be reported include the following: honeycomb core material, methods of material fabrication, core material geometry (nominal cell size), core material density, specimen geometry, specimen preparation, specimen conditioning, environment of testing, specimen alignment, pre-crush procedure, pre-crush depth, loading procedure, and speed of testing.1.1 This test method determines the static energy absorption properties (compressive crush stress and crush stroke) of honeycomb sandwich core materials. These properties are usually determined for design purposes in a direction normal to the plane of facings as the honeycomb core material would be placed in a structural sandwich construction. 1.2 Permissible core materials are limited to those in honeycomb form. 1.3 This test method is not intended for use in crush testing of stabilized honeycomb core materials (for which the facing plane surfaces of the honeycomb core material are dipped in resin to resist local crushing) or sandwich specimens (for which facings are bonded to the honeycomb core material). 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4.1 Within the text the inch-pound units are shown in brackets. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

ANSI A190.1-2012 木制品标准.胶合木结构

Standard for wood products - Structural Glued Laminated Timber

ANSI/APA PRG320-2012 交叉层压材额定性能标准

Standard for Performance-Rated Cross-Laminated Timber

ANSI/NSF 35(i6)-2012 堆焊食品服务设备用高压装饰性层压板(HPDL)

High pressure decorative laminates (HPDL) for surfacing food service equipment

UL SUBJECT 1294-2011 复合板测试纲要

1.1 This Outline covers factory-built panel assemblies for use within or as part of the structure of buildings for commercial, industrial and residential use. These assemblies incorporate pre-installed branch circuit electrical power distribution systems which are usually concealed and may not be accessible for inspection at the installation site. Some panels incorporate audio, lighting, ventilation fans and other utilization equipment. 1.2 The panel systems are evaluated only for installation in ordinary locations in accordance with the National Electrical Code, ANSI/NFPA 70. Special Occupancies as specified in ANSI/NFPA 70 are not addressed by these requirements. 1.3 Composite panel assemblies covered by this outline are intended to be installed in accordance with the National Electrical Code, ANSI/NFPA 70, where the acceptability of the field assembled panel system is determined by the Authority Having Jurisdiction. 1.4 The surface flammability or fire resistance of the panel or panel system is not covered by this outline except as related to the individual requirements of the electrical components used within the system.

Outline of Investigation for Composite Panels

BS ISO 3034:2011 波纹纤维板.单板厚度的测量

Corrugated fibreboard. Determination of single sheet thickness

KS F 3230-2011 木塑复合板

이 표준은 열가소성 수지에 목질섬유(중량기준으로 50 % 이상)를 혼합하고, 첨가제를 첨가

WPC(Wood Plastic Composite) deck floor board

KS F 4723-2011 多层壁末道涂刷料

이 표준은 시멘트, 합성 수지 등의 결합재 및 골재를 주원료로 하여 주로 건축물의 외벽을

Multi-layer wall coatings for glossy textured finishes

DIN EN 12369-2:2011 木质板材.结构设计的特性值.第2部分:胶合板;德文版本EN 12369-2-2011

This European standard provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1.

Wood-based panels - Characteristic values for structural design - Part 2: Plywood; German version EN 12369-2:2011

BS EN 320:2011 木屑板和纤维板.抗螺钉轴向拔出力的测定

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

Particleboards and fibreboards. Determination of resistance to axial withdrawal of screws

BS EN 12369-2:2011 木质板材.结构设计特性值.层压板

This European Standard provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given in this standard are to be used in accordance with EN 1995-1-1. When utilizing the classification system for derivation of plywood characteristic values, this European Standard can only be applied with reference to EN 636. This European Standard includes the characteristic values of the mechanical properties for plywood complying with EN 636 in bending, tension, compression, panel shear and planar shear. EN 636 classifies bending properties into two sets of classes, one for stiffness and another for strength. Stiffness and strength in tension and compression are related to the same properties in bending. For shear properties, fixed values determined by correlation to density are provided. Where optimised values are needed, the characteristic values are determined directly by testing in accordance with EN 789 and EN 1058 or by combination of testing according to the latter two standards and calculation according to prEN 14272. This European Standard applies to panels complying with the three following conditions:  5 layers or more and 6 mm overall thickness and more;  the ratio of the cumulative thickness of veneers in alternate directions does not exceed 2,5;  wood species with a mean density greater than 350 kg/m3 and not exceeding 750 kg/m3.

Wood-based panels. Characteristic values for structural design. Plywood

NF B54-178*NF EN 13353+A1:2011 实心木质板材(SWP).要求.

Solid wood panels (SWP) - Requirements.

NF Q03-126*NF ISO 3034:2011 波纹纤维板.单板厚度测定.

Corrugated fibreboard - Determination of single sheet thickness.

NF B51-128*NF EN 320:2011 刨花板和纤维板.螺丝抗轴向抽出的测定.

Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws.