B72 林产化工原料 标准查询与下载

LY/T 1617-2004 双电层电容器专用活性炭

本标准规定了双电层电容器专用活性炭的技术要求、试验方法、检验规则及标志、包装、运输、贮存要求。 本产品适用于以果壳(核)为原料制得的用于制造双电层电容器及其他高档电容器产品的粉状活性炭。

Activated carbon for electric double-layer capacitor

LY/T 1616-2004 活性炭水萃取液电导率测定方法

本标准规定了活性炭水萃取液电导率的测定方法。 本标准适用于不同原料、不同制造方法、不同用途活性炭水萃取液电导率的测定。

Determination of electric conductivity of aqueous extract from activated carbon

LY/T 1615-2004 木质活性炭术语

本标准规定了木质活性炭的专用术语。 本标准适用于我国木质活性炭行业。

Standard terminology relating to wooden activated carbon

LY/T 1623-2004 木糖液脱色用活性炭

本标准规定了木糖液脱色用活性炭的技术要求、试验方法、检验规则及标志、包装、运输、贮存要求。 本标准适用于以木质为原料生产的粉状活性炭，用于以玉米芯为原料的木糖水解液的脱色。

Activated carbon for refining of wood sugar

ISO 35:2004 天然橡胶胶乳浓缩物.机械稳定性测定

本标准规定了浓缩天然胶乳机械稳定度的测定方法， 本标准也适用于预硫化浓缩天然胶乳。此法不一定适用于用氢氧化钾保存的胶乳以及巴西橡胶树胶乳以外的天然胶乳， 此法也不适用于合成胶乳。

Natural rubber latex concentrate - Determination of mechanical stability

DB44/T 177-2003 互叶白千层(Melaleuca alternefolia (Maiden et Betche) Cheel)精油,松油醇-4型(茶树油)

本标准规定了互叶白千层精油，松油醇-4型（茶树油）的技术要求、试验方法和检验规则、包装、标志、运输和贮存等内容。本标准适用于对互叶白千层精油，松油醇-4型（茶树油）产品进行质量评估。

Oil of Melaleuca alterenfolia,terpinen-4-ol type (Tea Tree oil)

BS ISO 2000:2003 天然生胶.工艺分类橡胶(TSR)的规范指南

ISO 2000:2003 provides guidance on the specification of technically specified rubber (TSR). A grading system is proposed, based on the origin of the natural rubber content and on properties exhibited by the rubber. This International Standard is intended for use by parties involved in the procurement of TSR, and is intended to form a basis from which requirements for a particular case may be more closely specified. As such, it describes a number of criteria that will need to be the subject of appropriate agreement between the interested parties.

Rubber, raw natural - Guidelines for the specification of technically specified grades (TSR)

ASTM D7050-04(2009) 天然橡胶的标准实施规程-基于预测加工性能的取样和分类

In accordance with Specification D2227, shipments of TSR10 and TSR20 must meet a minimum initial Wallace plasticity (Po) of 30 to be accepted. However, even with this minimum restriction, the uncured viscoelastic or “processability” properties are allowed to vary greatly. This variation in properties can significantly affect the quality and efficiency of a factory operation. Bales of TSR10 or TSR20 which are lower in their uncured elastic quality (“soft” rubber) in some cases may impart better processing properties to tire innerliners, cushion gums, and sidewalls. “Soft” bales sometimes impart better building tack, better mold flow, and lower extrusion die swell with better dimensional stability. Also, these “soft” rubber bales may dissolve faster in solvents for adhesion dipping. Bales of TSR10 or TSR20 that are higher in their uncured elastic quality (“hard” rubber) in some cases generate greater shearing during the initial stages of a factory mix, which result in a faster breakdown and a shorter mix cycle. Therefore, in a factory operation, sometimes segregating TSR10 or TSR20 shipments into “soft” and “hard” categories can improve the efficiency and quality of a factory operation.1.1 This practice covers the sorting of natural rubber bales of TSR10 or TSR20 in the factory according to their predicted processing performance based on differences in viscoelastic properties. 1.2 This practice determines which bales should be used in factory compounds which benefit from using “soft” natural rubber versus which work better with “hard” natural rubber.

Standard Practice for Rubber from Natural Sources-Sampling and Sorting Bales Based on Predicted Processing Properties

NY/T 734-2003 天然生胶.通用标准橡胶生产工艺规程

本标准规定了通用标准橡胶在生产过程中的基本工艺及技术要求” 本标准适用于用鲜胶乳和杂胶为原料生产通用标准橡胶。

Raw natural rubber.Technical rules for production of general purpose standard rubber

NY/T 733-2003 天然生胶.航空轮胎标准橡胶

本标准规定了航空轮胎标准橡胶的术语和定义.要求与试验、检验规则，以及包装，标志贮存和之 输方法。 本标准适用于以鲜胶乳、胶园凝块为原料生产的航空轮胎标准橡胶。

Raw natural rubber.Aviation tire standard rubber

NY/T 732-2003 浓缩天然胶乳.氨保存低蛋白质胶乳

本标准规定了氨保存离心和高化浓缩生产的低蛋白质天然胶乳的要求 ，试验方法与检验规则以及 包装标志、贮存和运输。 本标准适用于酶解法离心和膏化浓缩的低蛋白质天然胶乳，也适用于多次离心法生产的低蛋白质 天然膠乳。 本标准不一定适用于其他方法生產的低蛋白天然膠乳。

Natural rubber latex concentrate.Low protein,ammonia-preserved types

NY/T 735-2003 天然生胶.子午线轮胎橡胶生产工艺规程

本标准规定了天然生胶子午线轮胎橡胶生产过程中的基本工艺及技术要求。 本标准适用于以鲜胶乳辅助生物凝固凝块、胶园凝块.人工处理胶团为原料，或这些原料按一定比 例摊合生产子午线轮胎橡胶。

Raw natural rubber.Technical rulel for production of radial tire rubber

ISO 2000:2003 天然生胶.工艺分类橡胶规范指南

本标准提供了天然生胶技术分级橡胶(TSR)的规格导则， 根据天然生胶种类及其性能规定了分级要求。 本标准适用于采购TSR的人员使用， 并可作为值得在某种情况下可能需要更严格规定的一些要求的基础。因此， 本标准还列出了一些需要有关各方都同意的准则。

Rubber, raw natural - Guidelines for the specification of technically specified rubber (TSR)

ISO 125:2003 浓缩天然胶乳.碱度测定

本标准规定了浓缩天然胶乳碱度的测定方法。 本标准不一定适用于巴西橡胶树胶乳以外的天然胶乳， 也不一定适用于合成胶乳、配合胶乳、硫化胶乳以及乳化胶乳。

Natural rubber latex concentrate - Determination of alkalinity

ISO 9843:2002 杉木油.中国产地

This International Standard specifies certain charac-teristics of the oil of cedarwood, Chinese type (Cupressus funebris Endlicher), in order to facilitate assessment of its quality.

Oil of cedarwood, Chinese type (Cupressus funebris Endlicher)

SN/T 1098-2002 进出口松油和松油醇中α-松油醇含量的测定.毛细管气相色谱法

本标准规定了用毛细管柱气相色谱法测定进出口松油和松油醇中α-松油醇含量的方法。 本标准适用于进出口合成的松油和松油醇中α-松油醇含量的测定。

Determination of α-terpineol content in pine oil and terpineol for import and export.Gas chromatography method on capillary column

ASTM D802-02(2009) 松油抽样和测试的标准试验方法

The testing procedures described in these test methods have been in use for many years and emphasize the physical properties of pine oil rather than its chemical composition. Test Methods D 6387 describe a capillary gas chromatography method which is suitable for determining both the major and minor components found in pine oils.1.1 These test methods cover procedures for sampling and testing pine oils, and are applicable to both natural pine oils derived from pine stumps either by the steam and solvent process or by destructive distillation, and also to synthetic pine oils obtained by the chemical hydration of terpene hydrocarbons. 1.2 The procedures given in these test methods appear in the following order: Section Sampling4 Appearance5 Color6 Specific Gravity7 Refractive Index8 Composition9 Moisture10 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Sampling and Testing Pine Oils

ASTM D802-02 松油抽样和测试的标准试验方法

The testing procedures described in these test methods have been in use for many years and emphasize the physical properties of pine oil rather than its chemical composition. Test Methods D 6387 describe a capillary gas chromatography method which is suitable for determining both the major and minor components found in pine oils.1.1 These test methods cover procedures for sampling and testing pine oils, and are applicable to both natural pine oils derived from pine stumps either by the steam and solvent process or by destructive distillation, and also to synthetic pine oils obtained by the chemical hydration of terpene hydrocarbons.1.2 The procedures given in these test methods appear in the following order:SectionSampling4Appearance5Color 6Specific Gravity7Refractive Index8Composition9Moisture101.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Sampling and Testing Pine Oils

ASTM D233-02 松脂的抽样和测试的标准试验方法

The test procedures described in this standard were developed when the chief use for turpentine was as a solvent. Currently however, the chief use for turpentine (and pinenes) is as raw materials for the production of resins and synthetic organic chemicals. Thus the chemical composition of turpentines and pinenes is extremely important and tests, in addition to the ones described in these test methods, are required in order to fully characterize turpentines and pinenes. The most widely used technique for determining the chemical composition of turpentines (and pinenes) is gas chromatography (see Test Methods D 6387).1.1 These test methods cover procedures for sampling and testing turpentine, as defined by the Code of Federal Regulations and Terminology D 804. These test methods are also used for the sampling and testing of pinenes, the major components of most turpentines.1.2 These test methods primarily measure the physical rather than the chemical properties of turpentines and pinenes. As turpentines and pinenes are currently used chiefly as chemical raw materials for the production of resins and synthetic organic chemicals, chemical composition is also very important. Consequently, testing the chemical composition of turpentines and pinenes by gas chromatography has displaced these test methods to a large extent. (See for example Test Methods D 6387.)1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods of Sampling and Testing Turpentine

ASTM D1076-02 橡胶.浓缩的、氨储存的、乳状的和离心处理的天然胶乳的标准规范

1.1 This specification covers requirements for first grade concentrated natural rubber latex (see Table 1) of the following types:Type 1-Centrifuged natural latex preserved with ammonia only or by formaldehyde followed by ammonia.Type 2-Creamed natural latex preserved with ammonia only or by formaldehyde followed by ammonia.Type 3-Centrifuged natural latex preserved with low ammonia with other necessary preservatives.1.2 This specification is not necessarily applicable to latices prepared or preserved by other methods, and shall not be construed as limiting the desirability or usefulness of other types of latices. It does not apply to natural latex sources other than Hevea braziliensisnor to compounded latex concentrates.1.3 The analytical procedures applicable to the specifications are included and appear in the following order:SectionSampling6 and 7Total Solids8Dry Rubber Content9Total Alkalinity10Viscosity11Sludge Content12Coagulum Content13KOH Number14pH15Mechanical Stability16Copper and Manganese17Density18-30Volatile Fatty Acids31-35Boric Acid36Dry Films37Precision for All Test Methods381.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex