B93 农副产品与饲料加工机械 标准查询与下载

NY/T 991-2006 牧草收获机械 作业质量

本标准规定了牧草收获机械作业质量指标、检测方法、检验规则。 本标准适用于牧草收获机械的作业质量评定。

Assignment quality for hay-harvesting equipment

DIN 11622-1:2006 青贮饲料及液体肥料储存器. 第1部分: 设计准则总要求

This document applies to silage and liquid manure containers, the design and construction principles of general requirements.#,,#

Silage and liquid manure containers - Part 1: Design principles; general requirements

DIN 11622 Bb.1:2006 青贮饲料和粪液容器.图表的解释性说明,说明底部/墙连接点的设计

Silage and liquid manure containers - Explanatory notes, diagrams to illustrate the design of the base/wall joint

DB44/T 220-2005 荔枝、龙眼干燥设备 试验方法

本标准适用于以气体为干燥介质的荔枝、龙眼干燥设备（以下简称为千燥设备）的性能试验和生产试验。本标准规定的试验项目，可根据机型特点和试验类别的不同，允许有所增减。

Litchi and longan drying equipments Test method

DB44/T 205-2004 虾饲料加工成套设备 技术条件

本标准规定了虾饲料加工成套设备的术语和定义、技术要求、检验规则、标志、包装、运输及贮存。本标准适用于以鱼粉、玉米、豆粕、面粉等为主要原料，生产虾饲料的加工成套设备（以下简称成套设备）。

Shrimp feed processing complete sets of equipment Specifications

DB44/T 204-2004 荔枝、龙眼干燥设备 技术条件

本标准规定了荔枝、龙眼干燥设备的术语和定义、技术要求、检验规则、标志、包装、运输及贮存。本标准适用于间接加热方法对荔枝、龙眼进行干燥的干燥设备（以下简称设备）。

Litchi and longan drying equipments Specifications

BS EN 703:2004+A1:2009 农业机械.青贮饲料装载,混合和/或切碎及分配机械.安全性

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This document applies only to machines that have the following functional combinations:  mixing and distributing functions; or  mixing, chopping and distributing functions; or  loading, mixing and distributing functions; or  loading, mixing, chopping and distributing functions; or  chopping and distributing functions; or  loading, chopping and distributing functions. Silage block cutters, even if they carry out a single function, are covered by this document. It does not apply:  to machines which pick up green fodder directly from the field;  to loading cranes;  to silage buckets. NOTE 1 Loading cranes are dealt with in EN 12999. NOTE 2 Silage buckets will be dealt through an amendment or during next revision. This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising from:  failure of the control circuit;  inadequate seating;  inadequate lighting;  impossibility of stopping the machine in the best possible conditions;  travelling of machinery;  break-up of parts rotating at high speed. It is not applicable to environmental hazards (except noise). This document is not applicable to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs which are manufactured before the date of publication of this document by CEN.

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

BS EN 703:2004 农业机械.青饲料装载、搅拌和/或切碎机和分配机器.安全

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only, it includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This document applies only to machines that have the following functional combinations: — mixing and distributing functions; or — mixing, chopping and distributing functions; or — loading, mixing and distributing functions; or — loading, mixing, chopping and distributing functions; or — chopping and distributing functions; or — loading, chopping and distributing functions. Silage block cutters, even if they carry out a single function, are covered by this document. It does not apply: — to machines which pick up green fodder directly from the field; — to loading cranes; — to silage buckets. NOTE 1 Loading cranes are dealt with in EN 12999. NOTE 2 Silage buckets will be dealt through an amendment or during next revision. This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising from: — failure of the control circuit; — inadequate seating; — inadequate lighting; — impossibility of stopping the machine in the best possible conditions; — travelling of machinery; — break-up of parts rotating at high speed. It is not applicable to environmental hazards (except noise). This document is not applicable to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs which are manufactured before the date of publication of this document by CEN.

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

DIN 11622-22:2004 青贮料和厩液容器.第22部分:混凝土模板块

This document applies to concrete blocks acting as lost formwork to be used as silagesilos and liquid manure containers and drains according to DIN 11622-2.

Silage and liquid manure containers - Part 22: concrete blocks acting as lost formwork

DIN 11622-21:2004 青贮料和厩液容器.第21部分:混凝土块

This document applies to concrete blocks to be used for silagesilos and liquid manure containers according to DIN 11622-2.

Silage and liquid manure containers - Part 21: Concrete blocks

DIN 11622-2:2004 青贮料和厩液容器.第2部分:设计原则.加筋混凝土、加筋混凝土预制件、混凝土块和混凝土模板块制青贮料和厩液容器

Silage and liquid manure containers - Part 2: Design principles - Silage and liquid manure containers made of reinforced concrete, precast reinforced concrete elements, concrete blocks and concrete blocks acting as lost formwork

NY 644-2002 饲料粉碎机安全技术要求

Safety technical requirements for feed grinder

SC/T 6019-2001 颗粒饲料压制机.试验方法

Pellet feed mill.Test methods

JB/T 10290-2001 饲料膨胀机

本标准规定了饮料环隙膨胀机的型式、基本参数、技术要求、试验方法、检验规则，标志、包装、运输、贮存。 本标准适用于主要工作部件为螺杆、锥阀、出口为环隙，对粉状饮料进行膨胀调质的膨胀机。 本标准于2001年6月首次发布。

Feed expander

JB/T 10289-2001 饲料膨化机

本标准规定了螺杆挤压式饲料膨化机的型式、型号、基本参数、主要性能、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于带蒸汽调质和不带蒸汽调质膨化粉状物料的螺杆挤压式饲料膨化机。 本标准于2001年6月首次发布。

Feed extruder

JB/T 10267-2001 胶辊砻谷机

本标准规定了胶辊砻谷机的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于胶辊砻谷机。 本标准于2001年6月首次发布。

Rubber roll husker

SC/T 6011-2001 平模颗粒饲料压制机.技术条件

Pellet mill with flat die.Technical condition

ISO 11520-2:2001 农业谷物干燥机 干燥性能的测定 第2部分:附加方法和农作物特定要求

This part of ISO 11520 specifies additional procedures and gives guidance for testing and evaluating the drying performance of continuous-flow and batch grain driers for specific grain crops including wheat, barley, oats, maize, rice, sorghum and rape. It supplements the general procedures given in ISO 11520-1 based on drying only wheat over the limited range of moisture content of 20 % to 15 % wet basis. Methods and data are given for a) determining the evaporation rate of driers when drying grain crops under steady state conditions, and b) correcting the main drier performance characteristics, including evaporation rate, grain flow rate, drying time and specific energy and fuel consumption, to reference and other ambient conditions. Procedures are specified for sampling input and output grain to assess changes in grain quality.

Agricultural grain driers - Determination of drying performance - Part 2: Additional procedures and crop-specific requirements

JB/T 5681-2000 小型辊式磨粉机.试验方法

JB/T 5681-2000 本标准是对JB/T 5681-1991《小型辊式磨粉机 试验方法》的修订。修订后的标准明确了可靠性考核计算办法；个性了部分试验条件和要求；简化并完善了部分试验记录表格。 本标准规定了小型辊式磨粉机的性能试验和生产试验的试验条件、测试项目及试验方法。 本标准适用于小型辊式磨粉即小型辊式磨粉筛理组合机（包括单机自动上料磨粉机）。 本标准于1984年以N是342-84首次发布，于1991年9月第一次修订为JB/T 5681-91，本次是第二次修订。

Test method for small-sized roller mill

JB/T 7859-2000 稻谷加工工业用钢丝编织长孔筛网

本标准规定了稻谷加工工业用钢丝编织长孔筛网的型号、规格、标记和技术要求。 本标准适用于稻谷加工筛分用钢丝编织长孔筛网。

Woven steel cloth with rectangual apertures for rice milling industry