B95 营林机械与机具 标准查询与下载

BS ISO 6814:2009 林业机械.活动式和自推进式机械.术语,定义和分类

Machinery for forestry - Mobile and self-propelled machinery - Terms, definitions and classification

LY/T 1839-2009 灌木铡粉机

本标准规定了灌木铡粉机的产品型号、技术要求、试验方法、检验规则、标志、包装和保管。 本标准适用于加工柠条、毛条等灌木的铡粉机。

Shrub cut-sifter machine

BS ISO 13772:2009 林业机械.便携式链锯.非手动式链制动器性能

Forestry machinery - Portable chain-saws - Non-manually actuated chain brake performance

ISO 6814:2009 林业机械.移动和自行式机械.术语,定义和分类

Machinery for forestry - Mobile and self-propelled machinery - Terms, definitions and classification

NF U25-514:2009 林用机械.带内燃机的便携手持式机械的噪声试验规范.工程法(2级准确度)

Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy).

NF U25-515:2009 林业机械.带内燃机的便携式手持机械的振动试验规范.手柄处的振动

Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles.

ISO 13772:2009 林业机械.便携式链锯.非手动链制动器的性能

Forestry machinery - Portable chain-saws - Non-manually actuated chain brake performance

BS ISO 6531:2008 林业用机械.便携式链锯.词汇

Machinery for forestry - Portable chain-saws - Vocabulary

BS ISO 7112:2008 林业机械.便携式灌木铲除机和杂草修剪机.词汇

Machinery for forestry - Portable brush-cutters and grass-trimmers - Vocabulary

DIN EN ISO 11681-1:2009 林业机械 便携式链锯的安全要求和试验 第1部分:林业专用链锯

This part of ISO 11681 deals with the significant hazards and specifies safety requirements and their verification for design and construction of portable combustion-engine, hand-held chain-saws, designed only for use by one operator and intended for forest work. It describes methods for the elimination or reduction of hazards arising from their use. In addition it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards. It does not cover the hazard from kickback for machines with an engine displacement over 80 cm3. The environmental aspects, except for noise, have not been considered. Chain-saws covered by this part of ISO 11681 are designed for use by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment (PPE). The chain-saws covered are designed only to be operated with the right hand on the rear handle and the left hand on the front handle. This part of ISO 11681 does not cover the hazard from kickback (see 5.5.1.3) or balance (see 5.4.1) for machines with an engine displacement of more than 80 cm3

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007); English version of DIN EN ISO 11681-1:2009-03

EN 14930:2007+A1:2009 农业和林业机械和园艺设备.徒步控制和手持式设备.热表面可及性的测定

This European Standard specifies a method for combustion engine driven pedestrian controlled and hand- held machines with or without back pack power unit used in agriculture, forestry and gardening to determine those parts of the surfaces identified by the product specific standards that are hot surfaces and can be touched unintentionally by an operator during normal operation. This European Standard is only applicable together with product specific standards for the categories of machines specified above. This European Standard does not specify which surfaces shall be assessed.

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces

DIN EN ISO 11681-2:2009 林业机械.便携式链锯的安全要求和测试.第2部分:林木保养用链锯

This part of ISO 11681 specifies safety requirements and their verification for the design and construction of portable combustion-engine, hand-held chain-saws for tree service, having a maximum mass, without guide bar or saw chain and with tanks empty, equal to 4,3 kg, and designed for use by a trained operator for pruning and dismantling standing tree crowns. It gives methods for the elimination or reduction of hazards arising from the use of the chain-saws. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards. The environmental aspects, except for noise, have not been considered. Chain-saws covered by this part of ISO 11681 are designed to be operated with the right hand on the rear handle and the left hand on the front handle by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment (PPE). This part of ISO 11681 is not applicable to chain-saws manufactured before its date of publication.

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006); English version of DIN EN ISO 11681-2:2009-02

UL 1602-2009 汽油发动机驱动的刚性切割轧边机和轧边修剪机

Gasoline-engine-powered, rigid-cutting-member edgers and edger-trimmers

DIN EN ISO 11680-1:2009 林业机械.动力杆式修枝锯的安全要求和试验.第1部分:带有整体内燃机的装置

This part of ISO 11680 specifies safety requirements, and the verification of those requirements, for the design, fabrication and use of portable, hand-held, pole-mounted powered pruners, having an integral combustion engine as the power source and using a drive shaft to transmit power to cutting attachments. The cutting attachments covered are saw chains, and reciprocating and circular saw blades. This part of ISO 11680 describes methods for the elimination or reduction of hazards arising from their use. In addition it specifies the type of information on safe working practices to be provided by the manufacturer. It does not cover the risk of electric shock from overhead electric power lines during use of the pruners, with the exception of warnings and advice intended for inclusion in instruction handbooks. A test method and safety requirements addressing this risk are yet to be developed. The list of significant hazards which require action to reduce the risk is given in annex A. Environmental aspects have not been considered. This part of ISO 11680 applies primarily to pruners manufactured after its date of issue.

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000); English version of DIN EN ISO 11680-1:2009-01

DIN EN ISO 22867:2009 林业机械.带内燃机的便携式手持机械的振动试验规范.手柄处的振动

This International Standard specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine- powered forestry machines such as chain-saws, brush-cutters and grass-trimmers. The code is applicable to manufacturer's product controls as well as type tests. It is intended that the results obtained will be able to be used to compare different machines or different models of the same type of machine. Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation.

Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004 including Cor 1:2006); English version of DIN EN ISO 22867:2009-01

DIN EN ISO 11680-2:2009 林业机械.动力杆式修枝锯的安全要求和试验.第2部分:携背负式杆式修枝锯

This part of ISO 11680 specifies safety requirements, and the verification of those requirements, for the design, fabrication and use of portable, hand-held, pole-mounted powered pruners with a back-pack power unit, using a drive shaft to transmit power to cutting attachments. The cutting attachments covered are saw chains, and reciprocating and circular saw blades. This part of ISO 11680 describes methods for the elimination or reduction of hazards arising from their use. In addition it specifies the type of information on safe working practices to be provided by the manufacturer. It does not cover the risk of electric shock from overhead electric power lines during use of the pruners, with the exception of warnings and advice intended for inclusion in instruction handbooks. A test method and safety requirements addressing this risk are yet to be developed. The list of significant hazards which require action to reduce the risk is given in annex A. Environmental aspects have not been considered. This part of ISO 11680 applies primarily to pruners manufactured after its date of issue.

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000); English version of DIN EN ISO 11680-2:2009-01

DIN EN ISO 22868:2009 林业机械.带内燃机的便携手持式机械的噪声试验规范.工程法(2级准确度)

This International Standard specifies a noise test code for determining, efficiently and under standardized conditions, the noise emission characteristics of portable, hand-held, internal combustion-engine-powered forest machines such as chain-saws, brush-cutters and grass-trimmers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level. The code is applicable for manufacturers' product controls as well as type tests. It is intended that the results obtained will be able to be used to compare different machines or different models of the same type of machine. Although the noise emission values determined are obtained in an artificial operation, they are representative of noise emission in a real work situation.

Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005); English version of DIN EN ISO 22868:2009-01

DIN EN ISO 11806:2009 农林机械.便携手提内燃机驱动丛林修剪机和割草机.安全性

This Standard specifies safety requirements and their verification for design and construction of portable hand-held, combustion engine driven brush cutters and grass trimmers. This standard is not applicable to backpack powered units, to lawn edge trimmers or to brush cutters equipped with metalic blades consisting of more than one part. It describes methods for the elimination or reduction of risks arising from their use. In addition it specifies the type of information on safe working practices to be provided by the manufacturer. It does not however give any technical requirement to reduce noise and vibration hazards. Indeed the different means available to reduce these risks are a matter for the technical information to which the manufacturer may resort, through specialised books or specific bodies. The list of significant hazards dealt with is given in Annex A. Annex A also indicates the hazards which have not been dealt with. Environmental aspects have not been considered in this standard. This Standard applies primarily to machines which are manufactured after the date of issue of the standard.

Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997); English version of DIN EN ISO 11806:2009-01

LY/T 1051-2008 园林机械 排气污染物测试方法

Test method for exhaust pollutants from garden machinery

BS ISO 6535:2008 便携式链锯.链制动器性能

Portable chain-saws - Chain brake performance