B95 营林机械与机具 标准查询与下载

LY/T 1188-2007 链锯 导板

本标准规定了導板的術語、型號、規格 技术要求 ，试验方法、檢驗規則和包裝要求。 本标准适用于油鋸及手提式电鏈鋸的導板。

chainsaw guide bar

SAE J1254-2007 伐木集材机的组成术语

This SAE Standard includes names of major components and parts peculiar to this type of machine. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document.

Component Nomenclature Feller Buncher

NF U34-110/A1:2007 林业机械.便携式链锯的安全要求和测试.第1部分:林业专用链锯.修改件1:平衡

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1 : chain-saws for forest service - Amendement 1 : balance.

DIN EN ISO 11681-1:2007 林业机械.便携式链锯的安全要求和测试.第1部分:林业专用链锯(ISO 11681-1-2004 + Amd.1-2007)

This part of ISO 11681 deals with the significant hazards and specifies safety requirements and their verification for design and construction of portable combustion-engine,hand-held chain-saws,designed only for use by one operator and intended for forest work. Itdescribes methods for the elimination or reduction of hazards arising from their use. In addition it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards.It does not cover the hazard from kickback for machines with an engine displacement over 80cm.The environmental aspects,except for noise,have not been considered. Chain-saws covered by this part of ISO 11681 are designed for use by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment(PPE).The chain-saws covered are designed only to be operated with the right hand on the rear handle and the left hand on the front handle. This part of ISO 11681 does not cover the hazard from kickback(see 5.5.1.3) or balance (see 5.4.1) for machines with an engine displacement of more than 80 cm.

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004 + Amd.1:2007); German version EN ISO 11681-1:2004+A1:2007

LY/T 1691-2007 林业机械 自行式机械 安全要求

Safety requirements for self-propelled forestry machinery

ISO 6534:2007 林业机械 便携式链锯护手器 机械强度

This International Standard specifies the mechanical strength requirements relating to the front and rear handguards of portable hand-held combustion engine chain-saws for use primarily in forestry. It also gives the corresponding test methods.

Forestry machinery - Portable chain-saw hand-guards - Mechanical strength

ISO 11681-1:2004/Amd 1:2007 林业机械.便携式链锯的安全要求和测试.第1部分:林业专用链锯.修改件1:平衡

This standard is Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service; Amendment 1: Balance

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service; Amendment 1: Balance

ISO 8334:2007 林业机械 便携式链锯 平衡和最大把持力矩的测定

This International Standards specifies a test method for the longitudinal and the lateral balance of portable combustion engine hand-held chain-saws. It also provides a test method for determining the maximum holding moment of tree service chain-saws.

Forestry machinery - Portable chain-saws - Determination of balance and maximum holding moment

KS B ISO 6531:2006 林业机械.便携手持式链锯.词汇

이 규격은 휴대용 손잡이식 체인톱, 체인과 가이드 바의 기계적 관점과 관련된 용어에 대해

Machinery for forestry-Portable hand-held chain-saws-Vocabulary

DIN EN ISO 11681-2:2006 林业机械.便携式链锯的安全要求和试验.第2部分:修枝锯(ISO 11681-2-2006)

This part of ISO 11681 specifies safety requirements and their verification for the design and construction of portable combustion-engine, hand-held chain-saws for tree service, having a maximum mass, without guide bar or saw chain and with tanks empty, equal to 4,3 kg, and designed for use by a trained operator for pruning and dismantling standing tree crowns. It gives methods for the elimination or reduction of hazards arising from the use of the chain-saws. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards. The environmental aspects, except for noise, have not been considered. Chain-saws covered by this part of ISO 11681 are designed to be operated with the right hand on the rear handle and the left hand on the front handle by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment (PPE). This part of ISO 11681 is not applicable to chain-saws manufactured before its date of publication.

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006); German version EN ISO 11681-2:2006

LY/T 1490-2006 悬挂式植树挖坑机

本标准规定了悬挂式植树挖坑机的名词术语、基本参数、技术要求、试验方法、检验规则、使用说明书的要求、标志、包装、运输和贮存等内容。 本标准适用于与拖拉机配套的悬挂式植树挖坑机。

Mounted planting auger

LY/T 1491-2006 悬挂式植树挖坑机

Suspended tree planting digging machine

LY/T 1668-2006 园林机械 便携式风力收集粉碎机

本标准规定了便携式风力收集粉碎机的产品型号、基本参数、技术要求、试验方法、检验规则、标志、使用说明书及包装、运输、贮存的内容。 本标准适用于汽油机驱动的作业对象为树叶、细小枯枝等残余植物的便携式风力收集粉碎机（以下简称为收集粉碎机）。

Garden machinery Portable engine collector-pulverizer

LY/T 1669-2006 风送高射程喷雾机

本标准规定了风送高射程喷雾机(以下简称喷雾机)的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于垂直射程不低于20m的以风力输送液体进行喷洒作业的喷雾机。

Air-assisted high-range sprayer

NY/T 267-2006 推式割胶刀

本标准规定了天然橡胶推式割胶刀的型号、规格、技术要求、检验规则及标志、包装、贮存和运输等要求。 本标准适用于推式割胶刀，其他类型的天然橡胶割胶刀可参照使用。

Hand-pushing tapping knife

ISO 22867:2004/Cor 1:2006 林业机械.带内燃机的便携式手持机械的振动试验规范.手柄处的振动.技术勘误1

This is Technical Corrigendum 1 to ISO 22867-2004 (Forestry machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles )

Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles; Technical Corrigendum 1

BS ISO 8083:2006 林业机械.落体防护装置(FOPS).实验室试验和性能要求

This International Standard establishes a consistent, reproducible means of evaluating characteristics of falling-object protective structures (FOPS) under loading, and prescribes performance requirements for a representative specimen under such loading. It is applicable to mobile or self-propelled, specially designed forestry machines as defined in ISO 6814. NOTE Research work is being done to develop a test method and criteria for certain polycarbonate materials and constructions where the present requirement levels may not be adequate.

Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements

DIN EN ISO 22868:2006 林业机械.带内燃机的便携手持式机械的噪声试验规范.工程法(2级精确度)

This noise test code specifies the information necessary to carry out efficiently and under standardised conditions the determination of the noise emission characteristics of portable hand-held, combustion engine powered forest machines such as chain saws, brush-cutters and grass trimmers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level. It is intended for manufacturers' product control as well as type tests. It is intended that the results obtained can be used to compare different machines or different models of the same type of machine. Although the noise emission values determined are obtained in an artificial operation, they are representative of noise emission in a real work situation.#,,#

Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005); German version EN ISO 22868:2006

KS B ISO 6687:2005 林业机械.绞盘.性能要求

이 규격은 임목 수확기에 사용되는 윈치의 제원 측정, 드럼 용량, 견인력, 견인 속도를 정

Machinery for forestry－Winches－Performance requirements

KS B ISO 6534:2005 林业机械.便携式链锯护手器.机械强度

이 규격은 주로 임업에 사용되는 휴대형 내연 기관 부착형 체인톱의 앞뒤 손 보호판에 대한

Portable chain-saw-Hand-guards-Mechanical strength