B95 营林机械与机具 标准查询与下载

LY/T 1096-2005 营林机械设备配属规范

本标准规定了营林机械设备配属的原则、要求和程序。 本标准适用于人工造林（含采伐迹地人工更新）、人工促进天然更新、营林作业和苗圃作业的机械配属。母树林营建和种子园营建机械的配属也可参照采用。 本标准不含组培育苗、容器育苗设备和森林防火设备配属。

Specification for silvicutrural equipments configaration

BS EN 14861:2004 林业机械.自行式机械.安全要求

This document deals with all common significant hazards, hazardous situations and events of the following forestry machinery: fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors and harvesters as defined in ISO 6814 and also multi-function versions of these machines, when they are used as intended and under the conditions foreseen by the manufacturer, see Clause 4. The machines listed can be of the mobile, ride-on or self-propelled type or a combination of these types. The following significant hazards are excluded: — thrown objects, that may occur on a particular machine, — noise, — vibration. NOTE Noise clauses including a noise test code will be developed as an amendment to this document. The use of this document will therefore not alone be sufficient to cover all significant risks for a majority of machines covered by this document. The list of significant hazards dealt with in this document is given in normative Annex A. This Annex is the list of significant hazards that have been identified as common to the covered mobile, ride-on and self-propelled forestry machines. It is not applicable to environmental hazards. This document is not applicable to machines, which are manufactured before the date of publication of this document by CEN.

Forest machinery - Self propelled machinery - Safety requirements

BS EN 14861:2004+A1:2009 林业机械.自推进式机械.安全性要求

This document deals with all common significant hazards, hazardous situations and events of the following forestry machinery: fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors and harvesters as defined in ISO 6814 and also multi-function versions of these machines, when they are used as intended and under the conditions foreseen by the manufacturer, see Clause 4. The machines listed can be of the mobile, ride-on or self-propelled type or a combination of these types. The following significant hazards are excluded: -thrown objects, that may occur on a particular machine, - noise, - vibration. NOTE Noise clauses including a noise test code will be developed as an amendment to this document. The use of this document will therefore not alone be sufficient to cover all significant risks for a majority of machines covered by this document. The list of significant hazards dealt with in this document is given in normative Annex A. This Annex is the list of significant hazards that have been identified as common to the covered mobile, ride-on and self-propelled forestry machines. It is not applicable to environmental hazards. This document is not applicable to machines, which are manufactured before the date of publication of this document by CEN.

Forest machinery - Self propelled machinery - Safety requirements

NY/T 927-2004 天然橡胶初加工机械 碎胶机

本标准规定了天然橡膠初加工機械碎膠機的術語和定義、產品型號規格、主要技术參數、技术要求、 试验方法检验规则及标志、包装、运输等要求。 本标准适用于天然橡胶初加工机械碎胶机。

Machinery for primary processing of natural rubber-Slab cutter

NY/T 926-2004 天然橡胶初加工机械 撕粒机

Machinery for primary processing of natural rubber-Shredder

NY/T 264-2004 剑麻加工机械 刮麻机

Machinery for processing of sisal-decorticator

LY/T 1619-2004 园林机械.便携式动力绿篱修剪机

本标准规定了便携式动力绿篱修剪机(以下简称为绿篱机)的定义、产品型号、基本参数、技术要求、试验方法、检验规则、标志、标签、使用说明书及包装、运输、贮存。 本标准适用于汽油机驱动的线性往复式割刀修剪绿篱的绿篱机。

Garden machinery-Porable powered hedge-trimmers

LY/T 1196.2-2004 便携式脉冲烟雾机.第2部分:试验方法

本标准规定了便携式脉冲烟雾机的试验方法。 本标准适用于以脉冲发动机为动力的便携式烟雾机(简称烟雾机)。

Portable pulse fogger-Part 2:Test methods

LY/T 1196.1-2004 便携式脉冲烟雾机.第1部分:技术条件

本标准规定了便携式脉冲烟雾机的定义、分类、技术要求、检验规则、标志、包装和贮存要求。 本标准适用于以脉冲发动机为动力的便携式烟雾机(简称烟雾机)。

Portable pulse fogger-Part 1:Technical requirements

LY/T 1618-2004 园林机械.便携式风力清扫机

本标准规定了便携式风力清扫机的产品型号、基本参数、技术要求、试验方法、检验规则、标志、标签、使用说明书及包装、运输、贮存等内容。 本标准适用于汽油机驱动的便携式风力清扫机(以下简称为风力清扫机)。

Garden machinery-Porable engine-blower

LY/T 1622-2004 牵引式深栽造林钻孔机

本标准给出了牵引式深栽造林钻孔机的术语，规定了牵引式深栽造林钻孔机的使用条件、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于牵引式深栽造林钻孔机。

Trailed tree deep planting earth auger

LY/T 1620-2004 电动草坪割草机

本标准规定了电动草坪割草机的术语、型号编制方法、基本要求、技术条件、试验方法、检验规则及标志、包装、贮运。 本标准适用于单相交流额定电压不超过250V，且电动机额定功率不大于3kW的旋刀电动草坪割草机(以下简称电动草坪割草机)。 本标准未涉及电动草坪割草机对其他用电设备产生电磁干扰的影响。

Electricmotion lawn mower

AS 2726.2:2004 链锯.安全要求.第2部分:修剪树木用链锯

Specifies the safety requirements for portable, hand-held internal combustion-engine driven chainsaws intended for use in arboriculture by an operator working up in trees. Guidance on the safe use of such chainsaws is given in an appendix.

Chainsaws - Safety requirements - Chainsaws for tree service

SANS 8084:2003 林业机械．操作保护结构．实验室试验和性能要求

Establishes a laboratory test method and performance requirements for operator protective structures (OPS) on forestry machines. It is applicable to mobile forestry machines as defined in SANS 6814 engaged in felling, processing, forwarding and skidding.

Machinery for forestry - Operator protective structures - Laboratory tests and performance requirements

SANS 8082:2003 林业用自推进式机械．防倾翻结构．实验室试验和性能要求

Establishes a consistent, reproducible means of evaluating the force-deflection characteristics of roll-over protective structures (ROPS) on self-propelled forestry machines under static loading, and prescribes performance requirements for a representati

Self-propelled machinery for forestry - Roll-over protective structures - Laboratory tests and performance requirements

SANS 11512:2003 林业机械.履带式专用机械.制动系统性能标准

Specifies performance test methods and criteria to enable uniform assessment of the service, secondary and parking brake systems of tracked specially designed forestry machines. Applies to self-propelled tracked special forestry machines with a maximum design speed of 20 km/h or less.

Machinery for forestry - Tracked special machines - Performance criteria for brake systems

SANS 11169:2003 林业机械.轮式专用机械.词汇、性能试验方法及制动系统标准

Lays down the vocabulary and specifies performance test methods and criteria to enable uniform assessment of the service, secondary and parking brake systems of wheeled specially designed forestry machines. Applies to self-propelled, rubber-tyred special forestry machines defined in SANS 6814 as skidders, forwarders and the various feller-buncher combination machines.

Machinery for forestry - Wheeled special machines - Vocabulary, performance test methods and criteria for brake systems

SANS 11850:2003 林业机械．自行式机械．安全要求

Specifies safety requirements for common design aspects of mobile, ride-on, self-propelled forestry machines. It is applicable to fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors, harvesters, and multi-function versions of thes

Machinery for forestry - Self-propelled machinery - Safety requirements

BS ISO 8084:2003 林业机械.操作人员保护结构.实验室试验和性能要求

This International Standard establishes a laboratory test method and performance requirements for operator protective structures (OPS) on forestry machines. It is applicable to mobile forestry machines as defined in ISO 6814 engaged in felling, processing, forwarding and skidding. The OPS are designed to provide reasonable protection from penetrating objects such as saplings, branches, broken winch lines and poking hazards in forestry work, but not from small, thrown objects such as chain teeth. Those OPS meeting the performance criteria will not provide complete operator protection under all conceivable circumstances, but are expected to minimize the possibility of operator injury in normal operational situations.

Machinery for forestry - Operator protective structures - Laboratory tests and performance requirements

LY/T 1610.2-2003 水力喷射播种机.第2部分:射流搅拌式喷播机.技术条件

Hydraulic seeding-Part 2:Hydraulic seeding in current agitating-Technical requirements