C66 安全控制技术 标准查询与下载

DIN EN ISO 13850 Berichtigung 1:2009 机械安全.紧急制动.设计原理.技术勘误DIN EN ISO 13850-2008-09

Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006); German version EN ISO 13850:2008, Corrigendum to DIN EN ISO 13850:2008-09

DIN EN ISO 14159 Berichtigung 1:2009 机械安全.机械设计用卫生要求.技术勘误DIN EN ISO 14159-2008-07

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002); German version EN ISO 14159:2008, Corrigendum to DIN EN ISO 14159:2008-07

DIN EN 349 Berichtigung 1:2009 机械安全.避免身体部位受到挤压的最小距离.技术勘误DIN EN 349-2008

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body; German version EN 349:1993+A1:2008, Corrigendum to DIN EN 349:2008-09

DIN EN 1005-4:2009 机械安全.人体特性.第4部分:与机械有关的运动和工作姿势的评估

This European Standard presents guidance when designing machinery or its component parts in assessing and affecting health risks due only to machine-related postures and movements, i.e. during assembly, installation, operation, adjustment, maintenance, cleaning, repair, transport, and dismantlement. This European Standard specifies requirements for postures and movements without any or with only minimal external force exertion. The requirements are intended to reduce the health risks for nearly all healthy adults. This European Standard is not applicable to the machinery, which is manufactured before the date of publication of this European Standard by CEN.

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery(includes Amendment A1:2008); English version of DIN EN 1005-4:2009-01

DIN EN ISO 13849-2 Berichtigung 1:2009 机械安全.控制系统的安全相关部件.第2部分:鉴定.技术勘误DIN EN ISO 13849-2-2008-09

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003); German version EN ISO 13849-2:2008, Corrigendum to DIN EN ISO 13849-2:2008-09

ASTM E2682-09 医疗转移科和职业用灾祸恢复方案开发的标准指南

This guide acknowledges the importance of a well-designed disaster recovery plan that will protect health information and business information from damage, minimize disruption, ensure integrity of data, and provide for orderly recovery. This guide suggests methods to protect the confidentiality and security of healthcare documentation during a disaster. It is intended that this guide will contribute to compliance with laws and regulations to improve protection of health information documentation and data integrity with the development of the contingency plan requirement. This guide will explain key points to include in preparing a disaster recovery plan to resume operations and minimize losses due to unscheduled interruption of critical services if a disaster would occur. This guide is intended to assist in the development of appropriate policies and procedures that provide protection for individually identifiable health information in a secure environment in the event of a disaster.1.1 This guide applies across multiple medical transcription settings in which healthcare documents are generated and stored: medical transcription departments, home offices, and medical transcription service organizations (MTSOs). Currently there is no standard disaster recovery plan in the medical transcription industry to provide guidelines for individuals, departments, and businesses to use for designing a disaster recovery plan for their medical transcription environment. 1.2 A disaster is when a sudden event brings great damage, loss, destruction, or interruption of critical services. These guidelines could assist in developing an organized response to reduce the time for loss of services, maintain continuity of workflow, and speed the overall business recovery process. 1.3 This guide supports the HIPAA Security Rule for ensuring data integrity with a contingency plan to include a data backup plan, a disaster recovery plan, and an emergency mode operational plan. 1.4 This guide is consistent with the requirement for disaster planning and recovery procedures as stated in Guide E 1959. 1.5 This guide is not intended as a disaster recovery plan for Health Information Management Departments or for an entire healthcare facility.

Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses

DIN EN ISO 13849-1:2008 机械安全.控制系统的安全相关部件.第1部分:设计用一般原理(ISO 13849-1-2006).英文版本DIN EN ISO 13849-1-2008

This part of ISO 13849 provides safety requirements and guidance on the principles for the design and integration of safety-related parts of control systems (SRP/CS), including the design of software. For these parts of SRP/CS, it specifies characteristics that include the performance level required for carrying out safety functions. It applies to SRP/CS, regardless of the type of technology and energy used (electrical, hydraulic, pneumatic, mechanical, etc.), for all kinds of machinery. It does not specify the safety functions or performance levels that are to be used in a particular case. This part of ISO 13849 provides specific requirements for SRP/CS using programmable electronic system(s). It does not give specific requirements for the design of products which are parts of SRP/CS. Nevertheless, the principles given, such as categories or performance levels, can be used. NOTE 1 Examples of products which are parts of SRP/CS: relays, solenoid valves, position switches, PLCs, motor control units, two-hand control devices, pressure sensitive equipment. For the design of such products, it is important to refer to the specifically applicable International Standards, e.g. ISO 13851, ISO 13856-1 and ISO 13856-2. NOTE 2 For the definition of required performance level, see 3.1.24. NOTE 3 The requirements provided in this part of ISO 13849 for programmable electronic systems are compatible with the methodology for the design and development of safety-related electrical, electronic and programmable electronic control systems for machinery given in IEC 62061. NOTE 4 For safety-related embedded software for components with PLr = e see IEC 61508-3:1998, Clause 7. NOTE 5 See also Table 1.

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006); English version of DIN EN ISO 13849-1:2008-12

PAS 1023 T.4-2008 工作设备工业安全指示执行方针. 第4部分: 工业管道

Guideline for the implementation of the industrial safety order work equipment — Part 4: Industrial piping

PAS 1023 T.2-2008 工作设备工业安全指示执行方针. 第2部分: 工场的组装

Guideline for the implementation of the industrial safety order work equipment — Part 2: Plant assembly

PAS 1023 T.1-2008 工作设备工业安全指示执行方针. 第1部分: 设备及总要求

Guideline for the implementation of the industrial safety order work equipment — Part 1: Equipment, general requirements

PAS 1023 T.3-2008 工作设备工业安全指示执行方针. 第3部分: 压力容器

Guideline for the implementation of the industrial safety order work equipment — Part 3: Pressure vessels

DIN EN 813:2008 人员防坠落设备.座椅安全带

This European Standard specifies requirements, testing, marking and information to be supplied by the manufacturer for sit harnesses to be used in restraint, work positioning and rope access systems, where a low point of attachment is required. Sit harnesses are not suitable to be used for fail arrest purposes.

Personal fall protection equipment - Sit harnesses; German version EN 813:2008

NF E09-051:2008 机器的安全性.与分离保护装置相关的联锁装置.设计和选择的原则

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection.

NF E09-051/IN2:2008 机械安全.与防护装置互连的连锁装置.设计和选择用原则

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection.

ISO 18436-4:2008 机器的状态监控和诊断.操作人员的认证和评估要求.第4部分:振动场润滑剂分析

Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 4: Field lubricant analysis

ISO 18436-7:2008 机器状态监控和诊断.操作人员认证和评估要求.第7部分:温度记录法

Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 7: Thermography

ISO 18436-6:2008 机器的状态监控和诊断.操作人员的认证和评估要求.第6部分:声发射

Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 6: Acoustic emission

DIN EN 61310-3:2008 机械安全.指示、标记和驱动.第3部分:驱动器的定位和操作要求

Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators (IEC 61310-3:2007); German version EN 61310-3:2008

DIN EN ISO 13850:2008 机械安全.紧急制动.设计原则

This International Standard specifies functional requirements and design principles for the emergency stop function on machinery, independent of the type of energy used to control the function. It is applicable to all machinery except for: -- machines in which the provision of emergency stop would not lessen the risk; -- hand-held portable machines and hand-guided machines. It does not deal with functions such as reversal or limitation of motion, deflection, shielding, braking or disconnecting, which can be part of the emergency stop function.

Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006); English version of DIN EN ISO 13850:2008-09

DIN EN 349:2008 机械安全.避免人身体部分被挤压的最小间隙

The object of this European Standard is to enable the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method. This European Standard is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in. NOTE For e.g. impact, shearing, drawing-in hazards, additional or other measures need to be taken.

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body(includes Amendment A1:2008); English version of DIN EN 349:2008-09