C66 安全控制技术 标准查询与下载

ISO 4126-7:2004/Cor 1:2006 过压保护用安全装置.第7部分:公共数据.技术勘误1

This standard is about Safety devices for protection against excessive pressure — Part 7:Common data; TECHNICAL CORRIGENDUM 1

Safety devices for protection against excessive pressure - Part 7: Common data; Technical Corrigendum 1

DIN EN 12841:2006 个人防跌落设备.绳索接近系统.绳索调整设备

This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, making and information supplied by the manufacturer. Rope adjustment devices conforming to this European Standard may be designed for the use of one person, or in case of rescue, for two persons simultaneously. The rope adjustment devices as specified are not suitable for use in a fall arrest system.

Personal fall protection equipment - Rope access systems - Rope adjustment devices; English version of DIN EN 12841:2006-11

SANS 14159:2006 机械安全性．机械设备设计的保健要求

Specifies hygiene requirements of machines and provides information for the intended use to be provided by the manufacturer. It applies to all types of machines and associated equipment used in applications where hygiene risks to the consumer of the prod

Safety of machinery - Hygiene requirements for the design of machinery

AQ/T 9002-2006 生产经营单位安全生产事故应急预案编制导则

本标准规定了生产经营单位编制安全生产事故应急预案的程序、内容和要素等基本要求。 本标准适用于中华人民共和国领域内从事生产经营活动的单位。 生产经营单位结合本单位的组织结构、管理模式、风险种类、生产规模等特点，可以对应急预案框架结构等要素进行调整。

Guiding principle for production and operation units to draw up contingency plans to deal with production safety accidents

BS 7858:2006 安全环境下各个工作人员的安全隔离.实施规程

This British Standard gives recommendations for the security screening of individuals to be employed in an environment where the security and safety of people, goods or property is a requirement of the employing organization’s operations and/or where such security screening is in the public interest.

Security screening of individuals employed in a security environment - Code of practice

BS 7858:2006+A2:2009 安全环境使用人员的安全屏蔽.操作规范

This British Standard gives recommendations for the security screening of individuals to be employed in an environment where the security and safety of people, goods or property is a requirement of the employing organization’s operations and/or where such security screening is in the public interest. NOTE 1 Property includes intellectual and physical property.

Security screening of individuals employed in a security environment - Code of practice

IEC 60825-4:2006 激光产品的安全.第4部分:激光防护器

This part of IEC 60825 specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This standard applies to all component parts of a guard including clear (visibly transmitting) screens and viewing windows, panels, laser curtains and walls. Requirements for beam path components, beam stops and those other parts of a protective housing of a laser product which do not enclose the process zone are contained in IEC 60825-1. In addition this part of IEC 60825 indicates: a) how to assess and specify the protective properties of a laser guard; and b) how to select a laser guard.

Safety of laser products - Part 4: Laser guards

DIN EN ISO 16000-1:2006 室内空气.第1部分:抽样方法的一般问题

General and substance-specific aspects of the measurement strategy to be taken into account before and during sampling as well as measurement procedures for individual substances or groups of substances in indoor air are described in the single parts of DIN EN ISO 16000. DIN EN ISO 16000 Part 1 deals with the general aspects of the measurement strategy. This standard is of special importance as principle procedures for ventilation and the setting of the room temperature before and during sampling are specified. Indoor air measurements are mainly undertaken for the following five reasons, of which the first may be unrelated to, or may evoke the other four: a) complaints by users about poor air quality, b) the need to determine the exposure of occupants to certain substances, c) the need to measure whether specified limit or Guideline values are being maintained, d) testing the effectiveness of remedial treatment, e) observed or suspected health effects of the occupants. In the standard the corresponding procedures for sampling and the boundary conditions to be observed are described in detail.

Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004); English version EN ISO 16000-1:2006-06

DIN EN ISO 16000-2:2006 室内空气.第2部分:甲醛的抽样方法

General and substance-specific aspects of the measurement strategy to be taken into account before and during sampling as well as measurement procedures for individual substances or groups of substances in indoor air are described in the single parts of DIN EN ISO 16000. DIN EN ISO 16000-2 deals with the specific aspects of the measurement strategy to be taken into account for the determination of formaldehyde. Especially the requirements for ventilation, humidity, setting of the room temperature, sampling duration as well as screening tests are considered. Before an indoor air measurement can be carried out, its objective has to be defined clearly. The measurement is usually required because of one of the following objectives: a) to check compliance with the guideline value, b) to determine maximum concentrations, c) to check the efficiency of remediation, d) to determine the average concentration over a longer period of time. In the standard the corresponding procedures for sampling and the boundary conditions to be observed are described in detail.#,,#

Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004); English version of DIN EN ISO 16000-2:2006-06

BS 8454:2006 高处作业和营救培训和教育交付的实施规程

This British Standard gives recommendations and guidance on the delivery of training and education for work at height, including rescue. The standard is applicable to training for work which falls within the scope of the Work at Height Regulations 2005. The standard is applicable to training for work at height in an industrial context, including work at height in factories and in the construction, civil engineering and cleaning sectors. NOTE The Work at Height Regulations 2005 specifically exclude “the provision of instruction or leadership to one or more persons in connection with their engagement in caving or climbing by way of sport, recreation, team building or similar activities”. The standard is not applicable to the provision of training for low level work at height, such as the use of small stepladders or “hop-ups” in retail environments or libraries. It is also not applicable to training which consists of just the provision of simple instruction or product familiarization or site induction. It is applicable to all training and education for work at height, including training involving practical experience of a work method or experience of exposure to height. This also includes “train-the-trainer” type situations in which an employer engages a training provider, or employs a trainer, to deliver training for a single specific task, or on a specific product, to some of their employees who then in turn provide training to other employees. The standard is intended for use by all organizations and individuals providing such training and/or education, including organizations which provide such training to their own employees. The standard is applicable to all locations where such training is provided, whether at a dedicated training facility or at other training sites. The standard is intended to apply to course-based training and education. It is not intended to apply to the provision by an employer of ongoing experience-based training and education in the workplace, where the subject matter of the training being provided is the job itself, for example as provided by an apprenticeship. This standard does not give a detailed specification of course content.

Code of practice for the delivery of training and education for work at height and rescue

BS DD IEC/TS 60479-1:2006 电流对人类和家畜的影响.一般问题

Effects of current on human beings and livestock - General aspects

ANSI/UL 913-2006 在I、II、III级1区危险场所使用的内在安全装置和附属装置的安全标准

These requirements cover: Apparatus or parts of app. for install. & use in Cl I, II or III, Div 1 haz. (classified) loc. in accordance with the NEC, NFPA 70. Associated app. outside Cl I, II or III, Div 1 loc. whose design & constr. may influence the intrinsic safety of an elect. circuit within Cl 1, II or III, Div 1 loc. And are based on consideration of ignition in loc. class. as haz. loc. by the presence of flammable or combustible mat. under the foll. atmos. cond: a) Min. ambient temperature of ambient temperature of 50鳦 (186鳩) b) oxygen concentration not greater than 21% by vol., & c) Nom. barometric pressure of 1 atmosphere.

Standard for Safety for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations

GOST ISO 13855-2006 机械安全.保护设备相对于人体部位接近速度的定位

Safety of machinery. Positioning of protective equipment with respect to the approach speeds of parts of the human body

ASTM F2621-06 电弧暴露法测定电弧额定成品的响应特性和设计完整性的标准实施规范

This practice can be used for a range of purposes including incident replication, development of improved arc rated protective products, and the determination of the response characteristics and design integrity of new or used arc rated finished products intended for use as protection for workers exposed to electric arcs. 5.1.1 In-service garments can have very different wash and wear histories. Caution must be used when applying test results from a particular used garment to other used garments. Factors to consider include the garments’ wear histories, work environments, and tasks for which the garments were worn; the methods and facilities for garment maintenance; the number of launderings or processings the garments have been subjected to; and other factors that could impact the protective performance of different garments. Test results from specific used garments should be considered only an approximation of results that might be obtained from other used garments of the same type. 5.1.2 Because of the variability of the arc exposure, different heat transmission values may result for individual sensors. The results of each sensor are evaluated in accordance with Section 12. This practice maintains the specimen in a static, vertical position and does not involve movement except that resulting from the exposure.1.1 This practice provides procedural guidelines for conducting arc testing on finished products intended for use as thermal protection by workers who may be exposed to electric arcs. 1.1.1 This practice is intended to provide procedural guidelines to improve consistency across testing groups. This practice is not intended to define the end points, parameters, or measures to be studied by the tester.1.1.2 This practice is supplemental to Test Methods F 1959/F 1959M and F 2178. Protective materials used to manufacture arc rated finished products shall be tested according to Test Method F 1959/F 1959M prior to being tested according to this practice, and face protective products shall be tested according to Test Method F 2178 prior to being tested according to this practice. Test Methods F 1959/F 1959M and F 2178 provide definitive numeric arc ratings for materials intended for use in finished products worn by workers exposed to electric arcs.Discussion-Face protective products such as face shields and hoods are tested as finished products using Test Method F 2178. These items may be subsequently tested using this practice in order to determine the performance of the interface area between the face protective product and the arc flash PPE worn on the torso.1.1.3 The test specimens used in this practice shall be in the form of arc-rated finished products. These arc-rated finished products may include, but are not limited to, single layer garments, multi-layer garments or ensembles, cooling vests, gloves, chaps, rainwear, balaclavas, faceshields, and hood assemblies with hood shield windows. Non-arc rated finished products shall not be used except that flammable under-layers may be included when part of a flame resistant system or for detecting heat transmission level through the finished product and flammable finished products may in some cases be appropriate for incident reenactment.1.1.4 The arc rated finished product specimens are new products as sold or products which have been used for the intended purpose for a designated time period.1.1.5 Fabrics, fabric layered systems, sewing thread, findings and closures used in arc rated finished products tested under this practice shall meet the requirements of Specification F 1506.1.1.6 Rainwear materials, findings and closures tested under this practice shall meet the requirements of Specification F 1891.1.2 This practice shall be used to measure and describe the response characteristic......

Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure

ASTM F819-06 工人用电气防护设备的相关标准术语

Standard Terminology Relating to Electrical Protective Equipment for Workers

ANSI/IEEE 1528a:2005 人脑对无线通信设备的峰值空间-平均绝对吸收率(SAR)测定的推荐规程:测量技术.修改1：包括人脑模型(SAM 模型)的CAD文件

Addresses ambiguity in the language of certain sections of the base document and provides a compact disk with a CAD data file of the original project's human head model.

Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques - Amendment 1: Include CAD File for Human Head Model (SAM Phantom)

BS PD 5304:2005 机械设备安全使用指南

This Published Document provides guidance on the safe use of machinery supplied prior to the Supply of Machinery (Safety) Regulations 1992 [3] (normally machines supplied before 1995). It also provides guidance for users on: — machinery designed to and manufactured in accordance with harmonized European machinery safety standards insofar as it is necessary, when following the instructions supplied for use; and — basic principles of safeguarding, with reference to current harmonized European machinery safety standards. It is intended that this guidance can be applied to any particular machinery during its modification, refurbishment, upgrading or change of use in order to satisfy the Provision and Use of Work Equipment Regulations 1998 [2]. See also the approved code of practice Safe use of work equipment [4]. However significant modification, refurbishment, upgrading or change of use to existing machinery that results in, for example changes of the measures used to control a hazard(s) or the introduction of a new hazard(s), can make it necessary to satisfy relevant requirements from the Supply of Machinery (Safety) Regulations 1992 [3] in particular Schedule 3. NOTE 1 PD 5304 is not intended to be used as an alternative to the current harmonized European machinery safety standards for machinery supplied in accordance with the Supply of Machinery (Safety) Regulations 1992 [3]. NOTE 2 Attention is drawn to the Supply of Machinery (Safety) Regulations 1992 [3] for machinery which has been subject to significant modification, refurbishment, upgrading or change of use and is intended to be made available for supply to a third party.

Guidance on safe use of machinery

BS 7883:2005 符合BS EN 795标准的固定装置的设计、选择安装、使用和维护的实用规程

This British Standard gives recommendations for design,selection,installation,use and maintenance of anchor devices conforming to BS EN 795,and for the design of anchor systems for installation at specific sites. It also gives guidance on the manufacture of anchor dibices and systems to assist the manufacturer in ensuring conformity to BS EN 795. This standard gives recommendations for the installation of anchor devices in existing buildings and in new construction.It also gives advice on methods for assessing the suitability of installed anchor devices and anchor systems. This standard is intended for use by designers, manufacturers, installers and users of anchor devices and anchor systems. It is also intended for use by other designers,e.g.architects and structural engineers, including those who are responsible for the design of safe access routes on buildings and structures.

Code of practice for the design, selection, installation, use andmainten ance of anchor devices conforming to BS EN 795

DIN V VDE V 0140-479-4:2005 电流对人和家畜的影响.第4部分:雷击对人和家畜的影响

Effects of current on human beings and livestock - Part 4: Effects of lightning strokes on human beings and livestock (IEC/TR 60479-4:2004)

DIN-Fachbericht 144:2005 安全、预防和技术上避免

The aim of this DIN technical report is to become familiar with the nature of safety, precaution and avoidance and to provide the knowledge required for the construction of new products and machinery in fields where no specific standard exists at present.#,,#

Safety, precaution and avoidance in technique