C66 安全控制技术 标准查询与下载

KS B ISO 13855:2003 机械安全性.与人体部位接近速度相关的安全防护装置的定位

이 규격은 손과 팔 등 신체 일부의 치수와 접근 속도에 기초한 설계 변수와 보호 장비의

Safety of machinery-Positioning of protective equipment with respect to the approach speeds of parts of the human body

ISO 22846-1:2003 个人防跌落保护性设备.绳索接近系统.第1部分:工作系统的基本原理

This part of ISO 22846 gives the fundamental principles for the use of rope-access methods for work at height. It is intended for use by employers, employees and self-employed persons who use rope-access methods, by those commissioning rope-access work and by rope-access associations. This part of ISO 22846 is applicable to the use of rope-access methods on buildings, other structures (on- or offshore) or natural features (such as cliff faces), during which ropes are suspended from or connected to a structure or natural feature. It is applicable to situations where ropes are used as the primary means of access, egress or support and as the primary means of protection against a fall. This part of ISO 22846 is not intended to apply to the use of rope-access methods for leisure activities, arboriculture, general steeplejack methods or emergency personal-evacuation systems, or to the use of rope-access (line rescue) techniques by the fire brigade and other emergency services for rescue work or for rescue training. Nevertheless, those engaged in other similar activities are likely to benefit from the advice given in this part of ISO 22846, as many of the principles do apply to, and offer good practice for, activities outside this formally defined scope. NOTE This is the first of a planned multi-part series of International Standards for rope access.

Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work

BS 8406:2003 事件管理及群众安全服务.实施规程

This British Standard gives recommendations for the infrastructure, staffing, operation and management of organizations providing stewarding and safety personnel at either indoor or outdoor events. The recommendations of this British Standard do not apply to the provision of security services such as static site guarding and mobile patrol services, and door supervisors/stewards. NOTE Recommendations for static site guarding and mobile patrol services, and door supervisors/stewards are given in BS 7499 and BS 7960 respectively.

Event stewarding and crowd safety services - Code of practice

IEC 60825-4:2003 激光产品的安全.第4部分:激光防护器

Specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. Applies to all component parts of a guard includ

Safety of laser products - Part 4: Laser guards

ISO 14698-1:2003 洁净室和相关可控环境.生物污染控制.第1部分:一般原理和方法

This part of ISO 14698 establishes the principles and basic methodology of a formal system of biocontamination control (Formal System) for assessing and controlling biocontamination when cleanroom technology is applied for that purpose. This part of ISO 14698 specifies the methods required for monitoring risk zones in a consistent way and for applying control measures appropriate to the degree of risk involved. In zones where risk is low, it can be used as a source of information. Application-specific requirements are not given. Neither are fire and safety issues addressed; for these, see regulatory requirements and other national or local documentation.

Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods

IEC 60825-4/AMD2:2003 激光产品的安全.第4部分:激光防护器.修改件2

This amendment to IEC 60825-4 is a new informative annex on guidelines on the arrangement and installation of laser guards.

Safety of laser products - Part 4: Laser guards; Amendment 2

ANSI/ASSE Z590.2-2003 职业安全位置的范围和功能的确定标准

Establishes the scope and functions of the professional safety position to consolidate in a clear and consistent manner an objective assessment of the position.

Criteria For Establishing the Scope and Functions of the Professional Safety Position

SY/T 10046-2003 船舶靠泊平台作业规范

Operation rules for vessel berthing platform

ANSI Z117.1-2003 有限空间的安全要求

Provides minimum safety requirements to be followed while entering, exiting and working in confined spaces at normal atmospheric pressure.

Safety Requirements for Confined Spaces

ANSI/IEEE 1584:2002 电弧闪光危害计算的实施导则

Provides techniques for designers and facility operators to apply in determining the arc flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment.

Guide for Performing Arc Flash Hazard Calculations

IEC 61032:1997/COR1:2003 外壳对人体和设备的防护.检验用探头

This standard is about Protection of persons and equipment by enclosures - Probes for verification; Corrigendum 1

Protection of persons and equipment by enclosures - Probes for verification; Corrigendum 1

ANSI/ASSE Z244.1-2003 危险能源控制.上锁/挂牌和替代方法

This standard establishes requirements for the control of hazardous energy associated with machines, equipment, or processes that could cause injury to personnel.

Control of Hazardous Energy - Lockout/Tagout and Alternative Methods

ASTM E2318-03 军事部署用环境卫生现场评估方法标准指南

1.1 Purpose8212;The purpose of this guide is to describe a scientific methodology for conducting environmental health site assessments (EHSAs) for military deployments. EHSAs are prepared to evaluate potential environmental exposures that may impact the health of deployed personnel as directed by Presidential Review Directive 5; Chairman, Joint Chiefs of Staff memorandum MCM-0006-02; and Department of Defense Instruction 6490.3. This guide is intended to assist the user in developing conceptual site models (CSMs) for deployment sites. CSMs are used to define the exposure pathways. The exposure pathways assist in the evaluation of potential health impacts. The goal of this guide is to identify complete and potentially complete exposure pathways that may affect the health of deployed personnel.1.2 This guide provides a series of steps designed to obtain sufficient information to evaluate potential environmental exposures that may affect the health of deployed personnel. It is most applicable when only a limited amount of information about the deployment area is available. If it becomes apparent to the environmental health professional in predeployment planning activities that sufficient information exists to evaluate the health significance of potential environmental exposures, it will not be necessary to complete the data collection activities described in this process. In this event, the environmental health professional will document their justification for not completing the data collection activities. An obvious example would be deployment to a major city in a developed county.1.3 Information generated by this process will be used for environmental health risk assessments. Environmental health risk assessments are beyond the scope of this guide.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Environmental Health Site Assessment Process for Military Deployments

ASTM E2292-03 一氧化碳中毒事故调查的标准规程

1.1 This practice covers guidelines for collecting and preserving information and physical evidence related to incidents involving the poisoning of individuals by carbon monoxide.1.2 This practice is not intended to be a guide for investigating carbon monoxide poisoning caused by hostile fires. Guidance on the investigation of carbon monoxide poisonings related to fire can be found in NFPA 921, Guide for Fire and Explosion Investigations.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Investigating Carbon Monoxide Poisoning Incidents

SAE J885-2003 人类对与机动车辆设计相关的冲击条件的容忍度

The purpose of this report is to assist the automotive safety designer and tester by providing them with quantitative data on the strength of the human body under impact loading conditions. This report reviews current quantitative data on human tolerance levels without recommending specific limits. Data developed on humans (including cadavers) are presented where available; however, in many cases animal data are provided where no suitable human results have been reported. this report confines itself, as much as possible, to information of direct use to the automotive designer and tester. Data of only academic interest are largely omitted; therefore, J885 should not be considered as a complete summary of all available biomechanical data. Most of the data cited in this report applies to adult males since little information is available on women or children. The summary data provided in the tables should be considered with the accompanying descriptive test. This material explains the manner in which the data were obtained and provides an insight as to their limitations.

Human Tolerance to Impact Conditions as Related to Motor Vehicle Design

ANSI S2.72, Pt 4-2003 机械振动和冲击.人体处于全身振动的评价.第4部分:在固定导轨运输系统中振动和旋转运动对乘客和乘务员舒适度影响的评定指南

Aids in the design and evaluation of fixed-guideway passenger systems with regard to the impact of vibration and repetitive motions on passenger comfort.

Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

BS EN 12198-3:2002+A1:2008 机械安全.机器发散辐射产生风险的评估和降低.第3部分:通过衰减或屏蔽降低辐射

The purpose of this European standard is to provide means to enable manufacturers of machinery concerned by a radiation hazard to design and manufacture efficient safeguards against radiations. Specific technical details of the design of shields for the different types of radiation and machines will be provided in other standards. This European standard applies to machinery as defined by EN 292. Part 1 of this standard contains the general principles of risk assessment of radiation emission by machinery. Details of the measurement of the radiation emission are given in Part 2 of this standard. This standard deals with a design strategy for reducing the radiation flux by attenuation or screening.

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening

BS EN 13980:2002 潜在爆炸性环境.质量体系的应用

1.1 General This European Standard specifies particular requirements and information for establishing and maintaining a quality system in accordance with the requirements of Annex IV and Annex VII of Directive 94/9/EC. It is intended for use by manufacturers, notified bodies and regulatory authorities. Therefore, when notified bodies assess the quality systems of manufacturers this document is intended to be the basis of the initial assessment and subsequent visits. 1.2 Application Only those requirements in clause 7 of this European Standard pertaining to the difference between Annex IV and VII of the Directive may be excluded, provided that conformity of the product can still be demonstrated. Permissible exclusions with respect to Annex VII of Directive 94/9/EC are as follows: 7.1 Planning of product realisation; 7.2.3 Customer communication; 7.4 Purchasing; 7.5.1 Control of production and service provision; 7.5.2 Validation of processes for production and service provision; 7.5.3 Identification and traceability. No explicit requirements in Annex IV and VII relate to the concept of “continuous improvement”. As a consequence, references in this European Standard to the requirements of EN ISO 9001:2000 exclude this concept.

Potentially explosive atmospheres - Application of quality systems

BS EN 13821:2002 潜在爆炸性环境.防爆.粉尘/空气混合物的最低点火能量的测定

This European Standard specifies a method of test to determine the minimum ignition energy of a dust/air mixture by an electrically-generated spark. The test method is not suitable for use with recognised explosives, gunpowder, dynamite, explosives which do not require oxygen for combustion; pyrophoric substances, or substances or mixtures of substances which can under some circumstances behave in a similar manner. Where any doubt exists about the existence of a hazard due to explosive properties, expert advice should be sought. WARNING — It is essential that precautions are taken to safeguard the health of personnel conducting the

Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures

BS EN 13890:2002 工作场所空气.空气载粒子中金属和类金属物的测量程序.要求和试验方法

This European Standard specifies performance requirements and test methods for the evaluation of procedures for measuring metals and metalloids in airborne particles collected on a suitable substrate, e.g. a filter. This European Standard is not applicable to procedures for measuring metals or metalloids present in inorganic gases or vapours, e.g. mercury, arsine, etc (see EN 838 [1] and EN 1076 [2]), or to procedures for measuring metals and metalloids in compounds that could be present as a particle/vapour mixture, e.g. arsenic trioxide (see ENV 13936 [3]). This European Standard is applicable to measuring procedures in which sampling and analysis is carried out in separate stages, but it does not specify performance requirements for collection, transport and storage of samples, since these are dealt with in EN 13205. This European Standard specifies a method for determining the bias and precision of the analytical method and combining this with the bias and precision of the sampling method to estimate the overall uncertainty of the measuring procedure as a whole. If there is no procedure for measuring a particular metal or metalloid which meets the requirements of this European Standard, it is recommended to use a measuring procedure whose performance is nearest to the specified requirements.

Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods