C66 安全控制技术 标准查询与下载

ANSI/ASTM D4276:1996 限行区惯例

This practice covers recognized procedures necessary to protect the health and safety of workers required to enter confined spaces. These procedures are particularly applicable to entry into the confined areas associated with the use of halogenated organic solvents. Confined areas addressed in this practice include, but are not limited to: vapor degreasers, cold cleaning tanks, storage vessels, tank cars and trucks, van trailers, ships or barges, pits or sumps, and unventilated rooms. This practice does not necessarily address entry into all confined spaces nor does it address the decision strategy involved in requiring such entry. Although this practice describes specific safety steps to be taken for entry into confined spaces, it is not intended to preclude the use of any additional measures that may be deemed necessary for a particular situation. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Practice for Confined Area Entry

ANSI/ISO 10819:1996 机械振动和冲击.手臂振动.手掌上手套振动传递率的测量和评估用方法

Specifies method for laboratory measurement, data analysis and reporting of vibration transmissibility of gloves in terms of vibration transmission from handle to palm of hand in frequency range 31.5-1250 Hz. Intended to define screening test for vibration transmission through gloves. Many factors influence transmission of vibration through gloves, so transmissibility value according to this standard isn't sufficient to assess health risk due to vibration.

Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the plam of the hand

LD 82-1995 高温作业分级检测规程

本标准规定了高温作业分级的测定内容及方法。 本标准适用于室内有生产性热源的作业危害程度的分级测定。

Rules of inspect for classification of works in heat environment

UL 698-1995 危险场所用工业控制设备

Industrial control equipment for use in hazardous (classified) locations

BS EN 626-1:1994+A1:2008 机械安全.降低机械排放的有害物质对健康的危害.机械制造原理和规范

This European Standard deals with principles for the control of risks to health due to hazardous substances from machinery. This European Standard is not applicable to hazardous substances which are a hazard to health solely because of explosive, flammable, high or low temperature, high or low pressure or radioactive properties.

Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers

PD 6519-1-1995 电流通过人体时的影响指南.一般情况

Guide to effects of current on human beings and livestock. General aspects

ASTM D4276-95 有限通道面积的标准规程

1.1 This practice covers recognized procedures necessary to protect the health and safety of workers required to enter confined spaces. These procedures are particularly applicable to entry into the confined areas associated with the use of halogenated organic solvents.1.2 Confined areas addressed in this practice include, but are not limited to: vapor degreasers, cold cleaning tanks, storage vessels, tank cars and trucks, van trailers, ships or barges, pits or sumps, and unventilated rooms.1.3 This practice does not necessarily address entry into all confined spaces nor does it address the decision strategy involved in requiring such entry.1.4 Although this practice describes specific safety steps to be taken for entry into confined spaces, it is not intended to preclude the use of any additional measures that may be deemed necessary for a particular situation.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Confined Area Entry

DIN EN 364 Berichtigung 1:1994 DIN EN 364:1993-02 技术勘误; 德文版本 EN 364:1992/AC:1993

Personal protective equipment against falls from a height; test methods

DIN 25478:1994 临界安全评估的计算机代码应用

Application of computer codes for the assessment of criticality safety

ANSI/ESD S5.2-1994 静电放电(ESD)敏感试验机器模型元件水平

Establishes the procedure for testing, evaluating and classifying the ESD sensitivity of components to the defined MM.

Electrostatic discharge (ESD) Sensitivity Testing Machine Model (MM) Component Level

ANSI/ESD S7.1-1994 静电放电(ESD)敏感产品的防护.材料的耐静电特性.地板材料

Protection of Electrostatic Discharge Susceptible Items - Resistive Characterization of Materials - Floor Materials

BS 7660:1993 通用安全销规范

This British Standard specifies dimensions, material, performance and marking requirements for safety pins for general use made from steel, stainless steel and brass. It does not cover safety pins for specialist applications, e.g. the aerospace industry, or nappy pins.

Specification for safety pins for general use

DIN EN 364:1993 防止人员从高空坠落的保护装置.试验方法

The document specifies test methods for materials, components and systems associated with equipment for protections falls from a height, as follows: a) static testing apparatus and static test methods, b) dynamic testing apparatus, including a torso dummy, c) test methods for dynamic performance and dynamic strength testing of components and systems, d) corrosion testing of metal components, e) test apparatus and test methods for conditioning tests and endurance tests. The document also makes recommendations for the scheduling of tests.#,,#

Personal protective equipment against falls from a height; test methods; german version EN 364:1992

BOCA CHAPTER 33 NFPC COMM-1993 易燃固体

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Flammable Solids

EN 412:1993 用于手工刀的防护挡板

Protective aprons for use with hand knives

BS EN 418:1992 机械安全.功能紧急制动设备.设计原理

This standard specifies design principles for emergency stop equipment for machinery. No account is taken of the nature of the energy source. A functional demarcation of the emergency stop equipment is shown in figure 1. Figure 2 illustrates the location of this equipment in machinery.

Safety of machinery - Emergency stop equipment, functional aspects - Principles for design

EN 361:1992 人员防高处坠落保护设备.整体装具

Personal protective equipment against falls from a height; full body harnesses

EN 353-1:1992 人员防高处坠落保护设备.刚性锚链上的导向型防坠档板

Personal protective equipment against falls from a height; guided type fall arresters on a rigid anchorage line

EN 353-2:1992 人员防高处坠落保护设备.挠性锚链上的导向型防坠档板

Personal protective equipment against falls from a height; guided type fall arresters on a flexible anchorage line

EN 354:1992 人员防高处坠落保护设备.牵索

Personal protective equipment against falls from a height; lanyards