C67 工厂防火防爆安全技术 标准查询与下载

MH 3003-2000 民用航空器维修工程爆炸危险场所安全规程

本标准规定了民用航空器维修工程爆炸危险场所的等级划分和区域范围，以及相关的防爆技术与管理要求。 本标准适用于民用航空器维修工程爆炸危险场所的防爆安全管理，也适用于这些场所的设计。

Rules for explosive hazardous restriction in civil aircraft maintenance areas

MH/T 3003-2000 民用航空器维修工程爆炸危险场所安全规程

Safety Regulations for Explosion Hazardous Locations in Civil Aircraft Maintenance Engineering

AIR FORCE A-A-59683-2000 灭火车(野地)

This commercial item description covers a commercial wildland fire truck. It shall have a 4x4 chassis with a diesel engine, an automatic transmission, and a five person cab with four doors. The wildland fire truck shall have a mounted utility body, conta

TRUCK, FIRE FIGHTING (WILDLAND)

BOCA CHAPTER 30 NFPC-1999 弹药和爆破剂,爆炸物

This eleventh edition presents the code as originally issued, with changes approved through 1989, and with certain editorial changes made to maintain the sequence of the code, to standardize the format of all 1990 BOCA National Codes, and to update the

Explosives, Ammunition and Blasting Agents

BOCA CHAPTER 12 NFPC-1999 危险粉尘爆炸

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Dust Explosion Hazards

ASTM E800-99 测量现有的或火灾中形成的气体的标准指南

1.1 Analytical methods for the measurement of carbon monoxide, carbon dioxide, oxygen, nitrogen oxides, sulfur oxides, carbonyl sulfide, hydrogen halides, hydrogen cyanide, aldehydes, and hydrocarbons are described, along with sampling considerations. Many of these gases may be present in any fire environment. Several analytical techniques are described for each gaseous species, together with advantages and disadvantages of each. The test environment, sampling constraints, analytical range, and accuracy often dictate use of one analytical method over another.1.2 These techniques have been used to measure gases under fire test conditions (laboratory, small scale, or full scale). With proper sampling considerations, any of these methods could be used for measurement in most fire environments.1.3 This document is intended to be a guide for investigators and for subcommittee use in developing standard test methods. A single analytical technique has not been recommended for any chemical species unless that technique is the only one available.1.4 The techniques described herein determine the concentration of a specific gas in the total sample taken. These techniques do not determine the total amount of fire gases that would be generated by a specimen during conduct of a fire test.1.5 This standard is used to measure and describe the response of materials, products, or assembles to heat and flame under controlled conditions but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Measurement of Gases Present or Generated During Fires

ASTM E2019-99 空气中尘雾最小点火能量的标准试验方法

1.1 This test method determines the minimum ignition energy of a dust cloud in air by a high voltage spark. This test method is intended to develop data to be used in deciding whether or not combustible dust-air mixtures are considered to be ignitable with respect to electrical discharge. Ignition energies determined by this method would be compared with ignition energies of other dusts to assess the relative hazard with regard to ignition by a pointed source, for example, electrostatic discharges, sparks from electrical equipment, friction sparks. Data obtained from this test method provide a relative data of ignition sensitivity of a dust cloud. Appendix X2 of this test method includes guidance on the significance of minimum ignition energy with respect to electrostatic discharges.

Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air

NF E09-090-1:1997 爆炸性气体.防爆.第1部分:基本原理和方法

Explosive atmospheres. Explosion prevention and protection. Part 1 : basic concepts and methodology.

SY/T 6230-1997 石油天然气加工.工艺危害管理

本标准规定了石油天然气加工设施的设计、施工、开工、操作、验收、维护和改造过程中的工艺危害管理的基本原则。 本标准适用于使用、生产、加工或储存具有潜在灾害性泄漏的石油、天然气或其中间产品及易燃、易爆、有毒、有害危险物质的设施。 本标准不适用于： a)用于分配、批发、零售的商业经营； b)液化天然气(LNG)设施和管道以及运输作业； c)油和气的钻井、服务、生产设施和经营； d)不包括在附录B(标准的附录)中的天然气加工设施； e)作为燃料就地使用的烃类储存设施； f)在常压未经冷却或冷冻情况下不起反应的易燃和可燃散装液体物料的储存和转运。 液化石油气的储存设施包括地下储罐的地面设施都在本标准范围之内。除非专门注明不包括在上述d)中。

Petroleum and natural gas processing.Management of process hazards

SY 6278-1997 天然气净化厂安全规范

本标准规定了天然气净化厂设计、试运投产、生产、装置检修等工作的安全要求。 本标准适用于石油企业天然气处理能力达到50×10^(4)m^(3)/d及以上的净化厂，处理能力较小的天然气净化站亦可参照执行。

Safety code for natural gas conditioning plant

DIN 21577:1996 地下煤矿煤尘易爆性.煤尘空气混合气体和混合物的试验和评定

This document contains instructions for the determination of the explosibility of coal dust in underground hard coal mining. First the methods of sampling and preparation of the required coal samples are indicated. Arrangement, execution and interpretation of tests in an explosion vessel and in an explosion gallery are described and criteria for the assessment are stated.#,,#

Explosibility of coal dust in underground hard coal mining - Tests and assessments of coal dust-air-mixtures and hybrid mixtures

NF E09-081-4:1996 机械的安全性.空气中有害物质散发评估.第4部分:排气系统俘获系数.示踪方法

Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 4 : capture efficiency of an exhaust system. Tracer method.

BOCA CHAPTER 12 NFPC-1996 危险粉尘爆炸

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Dust Explosion Hazards

LD 52-1994 气瓶防震圈

本标准规定了气瓶防震圈的技术要求、检验方法、验收规则、包装和贮运要求。 本标准适用于制造装配在气瓶上的胶质防震圈。

Gas cylinder shock ring

LD 55-1994 溶解乙炔气瓶质量保证控制要点

本标准规定了钢质焊接式溶解乙炔气瓶制造企业应具备的基本条件、原材料与外购件的质量保证、制造质量与质量检验的控制。 本标准适用于基准温度15℃时的限定充装压力小于1.52MPa，最高许用温度40℃，公称容积10~60L，内含多孔填料和溶剂，移动式、可重复充气的钢质焊接式溶解乙炔气瓶。

Key Points of Quality Assurance Control for Dissolved Acetylene Cylinders

LD 54-1994 钢质无缝气瓶质量保证控制要点

本标准规定了钢质无缝气瓶的质量控制要点。 本标准适用于按照GB5099《钢质无缝气瓶》组织生产的气瓶制造企业。

Key Points of Quality Assurance Control for Steel Seamless Gas Cylinders

LD 53-1994 液化氟氯烷瓶阀

本标准规定了液化氟氯烷瓶阀的型式、技术要求、试验方法、检验规则等。 本标准适用于公称工作压力不大于15MPa的液化氯氟烷瓶阀。

Liquefied chlorofluorocarbon bottle valve

LD 57-1994 溶解乙炔气瓶填料用硅藻土 技术条件

本标准规定了溶解乙炔气瓶填料用硅藻土的技术要求、试验方法、验收规则、包装和标志。 本标准适用于溶解乙炔气瓶填料用硅藻土。

Specifications for dissolving diatomaceous earth for acetylene cylinder packing

BOCA CHAPTER 12 NFPC-1993 危险粉尘爆炸

It shall be unlawful to interfere with, attempt to interfere with, conspire to interfere with, obstruct or restrict the mobility of or block the path of travel of any fire department emergency vehicle in any way, or to interfere with, attempt to inter

Dust Explosion Hazards

BOCA CHAPTER 12 NFPC COMM-1993 危险粉尘爆炸

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Dust Explosion Hazards