C80 消防综合 标准查询与下载

GA/T 1249-2015 火灾现场照相规则

本标准规定了火灾现场照相的术语和定义、照相器材、基本要求、拍照程序、拍照内容与方法、注意事项。本标准适用于火灾现场勘验中的照相工作。

Fire scene photography rules

GA/T 1250-2015 消防产品分类及型号编制导则

本标准规定了消防产品的术语和定义、分类及型号编制。本标准适用于消防产品的分类和型号编制。

Guidelines for the classification and model compilation of fire protection products

DB63/T 1379-2015 消防控制室标准化建设指南

本标准给出了消防控制室的一般要求、管理制度、记录及档案管理、值班、维护保养等指导意见,本标准适用于设置消防控制室的单位对消防控制室的建设与管理，上级主管部门和消防监督部门对单位进行检查指导。

Guidelines for Standardized Construction of Fire Control Room

DB63/T 1380-2015 火灾高危单位消防安全评估导则

本标准给出了火灾高危单位消防安全评估工作的一般要求以及评估内容、评估程序、评估等级、评估结果应用、监督检查等基本要求。本标准适用于青海省范围内火灾高危单位的消防安全评估工作，社会单位、上级主管部门和消防监督部门亦可参照执行。

Guidelines for fire safety assessment of high-fire risk units

DB63/T 1378-2015 消防监督视频监控系统建设指南

本标准给出消防监督视频监控系统的前端、存储以及消防监督视频监控系统和终端监督管理中心平台的设置要求和基本功能。本标准适用于拟设置和已设置消防监督视频监控系统的单位和场所

Guidelines for Construction of Video Surveillance System for Fire Protection Supervision

ANSI/NFPA 701-2015 纺织品和薄膜火焰传播用防火试验的标准方法

Standard Methods of Fire Tests for Flame Propagation of Textiles and Films (Effective Date: 12/1/2004)

DIN EN 60695-2-13:2015 火险试验.第2-13部分:灼热丝/发热丝试验法.对材料进行的灼热丝易燃性指数(GWFI)试验法(IEC 60695-2-13-2010+Cor.-2012+A1-2014);德文版本EN 60695-2-13-2010+A1-2014

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials (IEC 60695-2-13:2010 + Cor.:2012 + A1:2014); German version EN 60695-2-13:2010 + A1:2014

DIN EN 60695-2-12:2015 火险试验.第2-12部分:灼热丝/发热丝试验法.对材料进行的灼热丝易燃性指数(GWFI)试验法(IEC 60695-2-12-2010+A1-2014);德文版本EN 60695-2-12-2010+A1-2014

Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials (IEC 60695-2-12:2010 + A1:2014); German version EN 60695-2-12:2010 + A1:2014

JIS A 1306:2014 光衰减法检测烟浓度的测量方法

Measuring method of smoke density using light extinction method

DIN EN 60695-9-2:2014 着火危险试验. 第9-2部分: 表面火焰蔓延. 试验方法总结和相关 (IEC 60695-9-2-2014); 德文版本EN 60695-9-2-2014

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods (IEC 60695-9-2:2014); German version EN 60695-9-2:2014

ISO 17554:2014 燃烧试验反应.质量损失测量

This International Standard specifies a small-scale method for assessing the mass loss rate of essentially flat specimens exposed in the horizontal orientation to controlled levels of radiant heating with an external igniter under well-ventilated conditions. The mass loss rate is determined by measurement of the specimen mass and is derived numerically. The time to ignition (sustained flaming) is also measured in this test. Mass loss rate can be used as an indirect measure of heat release rate for many products. However, this is not an apparatus for determining heat release rates, and the measured mass loss rates for some products are not so closely linked to their heat release rates. Such products need to be tested in accordance with ISO 5660-1 for correct assessment of heat release.

Reaction to fire tests - Mass loss measurement

ANSI/ASTM E800:2014 火灾时现有气体或所产生气体的测量指南

Standard Guide for Measurement of Gases Present or Generated During Fires

DB36/T 807-2014 养老机构消防安全管理规范

Regulations on Fire Safety Management of Elderly Care Institutions

DB36/T 806-2014 医院消防安全管理规范

Hospital Fire Safety Management Regulations

DB36/T 805-2014 学校消防安全管理规范

School Fire Safety Management Regulations

DIN EN 60695-1-40:2014 着火危险试验.第1-40部分:电工产品火灾危险评估导则.绝缘液(IEC 60695-1-40-2013);德文版本EN 60695-1-40-2014

Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids (IEC 60695-1-40:2013); German version EN 60695-1-40:2014

DIN EN 60695-11-10:2014 着火危险试验.第11-10部分:试验火焰:50W水平和垂直火焰的试验方法(IEC 60695-11-10-2013).德文版本EN 60695-11-10-2013

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods (IEC 60695-11-10:2013); German version EN 60695-11-10:2013

IEC 60695-1-11:2014 火灾隐患试验.第1-10部分:电工产品的火灾隐患评估指南.火灾隐患评估

Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment

DIN EN 60695-11-3:2014 着火危险试验. 第11-3部分: 试验火焰. 500 W火焰. 设备和验证试验方法 (IEC 60695-11-3-2012); 德文版本EN 60695-11-3-2012

Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods (IEC 60695-11-3:2012); German version EN 60695-11-3:2012

BS EN 13381-2:2014 测定结构薄板耐火性的试验方法.垂向防火薄板

Test methods for determining the contribution to the fire resistance of structural members. Vertical protective membranes