D10 地质矿产勘察与开发综合 标准查询与下载

EJ/T 1070-1998 铀矿岩矿心管理规定

Management stipulation of uranium drilling core

EJ/T 363-1998 地面伽玛能谱测量规范

Code on ground γ-ray spectrometric survey

ASTM D6236-98 取芯和测井水泥或石灰稳定土壤的标准指南

1.1 This guide covers guidance for obtaining cores of cement or lime stabilized soil for use in determining compressive strength, lift thickness and bond strength, and other physical properties. This guide is primarily for use in coring through shallow (0.3 to 3 meter (1 to 10ft) thick) layers of cement or lime stabilized soils containg particles 060 50 mm (2 in.) in diameter to the underlying foundation. Note 1-This guide could be used for some Class C in self cementing fly ash materials which may also stabilize soil. 1.2 This guide does not cover material of less than 2070 kPa (300 psi) compressive strength such as cement-soil-bentonite mixtures or some controlled low strength materials (CLSM). 1.3 The values stated in SI units are to be regarded as the standard. Other values are examples or for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8. 1.5 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.

Standard Guide for Coring and Logging Cement- or Lime-Stabilized Soil

ASTM D6236-98(2004) 取芯和测井水泥或石灰稳定土壤的标准指南

Coring is performed to evaluate construction control and physical properties of stabilized soil. Coring is conducted to determine the quality and the total thickness of the stabilized soil and to evaluate bonding between lifts. Coring stabilized soil before it has curved to at least 2070 kPa (300 psi) compressive strength can cause excessive breakage in the core. If lab-cured specimens are prepared, samples may be cored to correlate with specified break intervals of the lab-cured specimens. Typical time intervals are 7, 28, 60, and/or 90 days after placement. Twenty-eight (28) days after placement is the most common time interval for first drilling cores.1.1 This guide covers guidance for obtaining cores of cement or lime-stabilized soil for use in determining compressive strength, lift thickness and bond strength, and other physical properties. This guide is primarily for use in coring through shallow (0.3 to 3 m (1 to 10 ft) thick) layers of cement or lime-stabilized soils containing particles 60; 50 mm (2 in.) in diameter to the underlying foundation.Note 18212;This guide could be used for some Class C in self-cementing fly ash materials, which may also stabilize soil.1.2 This guide does not cover material of less than 2070 kPa (300 psi) compressive strength such as cement-soil-bentonite mixtures or some controlled low strength materials (CLSM).1.3 The values stated in SI units are to be regarded as the standard. Other values are examples or for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.1.5 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This guide cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this guide be applied without consideration of a project's many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.

Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

DZ/T 0191-1997 1:250000地质图地理底图 编绘规范

本规范规定了1:250000地质图地理底图(以下简称底图)的性质、用途、数学基础、精度要求、编辑准备工作、编绘方法和技术要求、地图内容各要素的制图综合及审校验收的要求。 本规范适用于1:250000底图的编绘.是该底图工作设计编制、成果验收和质量监控的依据。同比例尺其他地质图件的地理底图编绘也应参照执行。

1:250000 Geological Map Geographical Base Map Compilation Specification

DZ/T 0195-1997 物探化探遥感勘查技术规程规范编写规定

本标准规定了物探、化探、遥感勘查技术规程及工作规范文本编写的基本要求、内容构成及其编写格式。 本标准适用于编写物探、化探、遥感各种方法及各类勘查工作的规程、规范。

Provisions on Compilation of Technical Specifications for Geophysical and Geochemical Prospecting Remote Sensing Exploration

DZ/T 0184.3-1997 颗粒锆石铀铅同位素地质年龄测定

本标准规定了单颗粒锆石(及斜锆石)铀一铅同位素地质年龄的测定方法。 本标准适用于单颗粒锆石(及斜锆石)铀一铅同位素地质年龄的测定。

Geological Age Determination of Granular Zircon U-Pb Isotopes

DZ/T 0184.13-1997 硅酸盐及氧化物矿物中氧同位素组成的五氟化溴法测定

本标准规定了用五氟化溴法测定硅酸盐及氧化物矿物或岩石中氧同位素的分析方法。 本标准适用于长石类、云母类、闪石类、辉石类、石榴石类、绿泥石类、高岭石类、橄榄石类、绿柱石类、蛇纹石类等硅酸盐矿物和石英、赤铁矿、金红石、锡石、黑钨矿等氧化物矿物及各种硅酸盐全岩的18O的测定。

Determination of Oxygen Isotope Composition in Silicate and Oxide Minerals by Bromine Pentafluoride Method

DZ/T 0184.14-1997 硫化物中硫同位素组成的测定

本标准规定了硫化物中硫同位素组成的测定方法。 本标准适用于各种硫化物单矿物的硫同位素组成的测定。

Determination of Sulfur Isotopic Composition in Sulfides

DZ/T 0184.15-1997 硫酸盐中硫同位素组成的测定

本标准规定了硫酸盐中硫同位素组成的分析方法。 本标准适用于各种含硫酸根的矿物、水样，以及含硫全岩和自然硫的硫同位素组成的测定。

Determination of Sulfur Isotopic Composition in Sulfate

DZ/T 0184.16-1997 硫化物中硫同位素的六氟化硫法测定

本标准规定了用六氟化硫法分析硫化物硫同位素的测定方法。 本标准适用于硫化物的硫同位素侧定。

Determination of sulfur isotope in sulfide by sulfur hexafluoride method

DZ/T 0184.17-1997 碳酸盐矿物或岩石中碳、氧同位素组成的磷酸法测定

本标准规定了用磷酸法测定碳酸盐矿物或岩石中碳、氧同位素组成的分析方法。 本标准适用于方解石、文石、白云石、菱铁矿等碳酸盐矿物、石灰岩等岩石及由碳酸盐组成的珊瑚、贝壳等化石的碳、氧同位素组成的测定。

Determination of Carbon and Oxygen Isotopic Composition in Carbonate Minerals or Rocks by the Phosphoric Acid Method

DZ/T 0184.12-1997 岩石、矿物中微量铅的同位素组成的测定

本标准规定了各类岩石及矿物中铅同位素组成的测定方法。 本标准适用于一般硫化物、氧化物、砷化物、硫酸盐、碳酸盐、硅酸盐等各类常见单矿物样品中的铅同位素组成的测定。也适用于一般火山岩、变质岩及沉积岩等非富铀岩石全岩样品的铅同位素组成的测定。

Determination of trace lead isotope composition in rocks and minerals

DZ/T 0184.11-1997 210Pb地质年龄测定

本标准规定了210Pb地质年龄和现代沉积速率的测定方法。 本标准适用于海洋、湖泊沉积物中210Pb含量及其地质年龄的测定。

210Pb Geological Age Determination

DZ/T 0184.18-1997 微量古生物化石中碳酸盐的碳、氧同位素组成的测定

本标准规定了微量古生物化石中碳酸盐的碳、氧同位素的测定方法。 本标准适用于微量(lmg以下)古生物化石(有孔虫、介形虫等)中碳酸盐的碳、氧同位素测定，也适用于微量方解石、石灰石等碳酸盐矿物中碳、氧同位素的测定。

Determination of Carbon and Oxygen Isotopic Compositions of Carbonates in Trace Paleontological Fossils

DZ/T 0184.19-1997 水中氢同位素的锌还原法测定

本标准规定了用金属锌法测定水中氢同位素的分析方法。 本标准适用于各种水样，石英、长石、方解石、白云石、萤石、重晶石、石榴子石、闪锌矿等矿物包裹体水;云母类和闪石类、辉石类、粘土类矿物的结构水;火成岩类、沉积岩类和变质岩类岩石的结晶水中的氢同位素组成的测定。

Determination of Hydrogen Isotope in Water by Zinc Reduction Method

DZ/T 0184.20-1997 水和不含氧矿物包裹体水中氧同位素 组成的五氟化溴法测定

本标准规定了用五氟化溴法测定水和不含氧矿物包裹体水中氧同位素的分析方法。 本标准适用于水、萤石、硫化物矿物(闪锌矿、方铅矿等)包裹体水氧同位素组成的测定。

Determination of Oxygen Isotopic Composition in Water and Oxygen-Free Mineral Inclusions by the Bromine Pentafluoride Method

DZ/T 0184.21-1997 天然水中氧同位素的二氧化碳 水平衡法测定

本标准规定了用二氧化碳——水平衡法测定天然水中氧同位素组成的分析方法。 本标准适用于各种水体的氧同位素组成的测定。

Determination of Oxygen Isotopes in Natural Water by Carbon Dioxide Water Balance Method

DZ/T 0184.4-1997 岩石、矿物铷锶同位素地质年龄及锶同位素比值测定

本标准规定了铷锶同位素地质年龄及锶同位素比值的测定方法。 本标准适用于全岩、单矿物的铷锶同位素年龄及锶同位素比值的测定。

Rubidium strontium isotope geological age and strontium isotope ratio determination of rocks and minerals

DZ/T 0184.22-1997 硅同位素组成的测定

本标准规定了硅同位素的分析方法。 本标准适用于各种含硅物质的硅同位素测定。

Determination of silicon isotopic composition