D21 煤炭分析方法 标准查询与下载

NB/T 10736-2021 煤泥干燥工艺系统能耗测试方法

Test method for energy consumption of coal slime drying process system

NF X34-101-9*NF EN ISO 17225-9:2021 固体生物燃料. 燃料规范和类别. 第9部分: 工业用分级粉状燃料和木屑

Solid biofuels - Fuel specifications and classes - Part 9 : graded hog fuel and wood chips for industrial use

NF X34-208*NF EN ISO 21654:2021 固体回收燃料的热值测定

Solid recovered fuels - Determination of calorific value

SN/T 5304-2021 煤中全硫、磷的测定 电感耦合等离子体原子发射光谱法

Determination of total sulfur and phosphorus in coal by inductively coupled plasma atomic emission spectrometry

T/CECS 792-2020 火场爆炸残留物提取及典型无机离子色谱法检验技术标准

主要技术内容包括：总则、术语、试剂、仪器设备、样品提取和样品检验等。

Technical standards for extraction of fire and explosion residues and inspection of typical inorganic ion chromatography

ISO 21663:2020 固体回收燃料. 通过仪器方法测定碳(C),氢(H),氮(N)和硫(S)的方法

This document specifies the determination of total content of carbon, hydrogen, nitrogen and sulfur in solid recovered fuels by instrumental method. Depending on the amount of test portion, micro or macro instrumental apparatus are used. This method is applicable for concentrations on dry matter basis of C > 0,1 %, N > 0,1 %, H > 0,1 % and S > 0,05 %.

Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method

SN/T 5254-2020 煤中氟和氯的测定 高温水解-离子色谱法

Determination of fluorine and chlorine in coal by high temperature hydrolysis-ion chromatography

SN/T 5255-2020 煤中铅、镉、砷、汞、铜、铬、镍、锰、钡、硒、锌、锡、钛、锑、钴、铝、铍、钒、银、钼含量的测定 电感耦合等离子体质谱法

Determination of lead, cadmium, arsenic, mercury, copper, chromium, nickel, manganese, barium, selenium, zinc, tin, titanium, antimony, cobalt, aluminum, beryllium, vanadium, silver and molybdenum in coal by inductively coupled plasma mass spectrometry

SN/T 5256-2020 煤炭中磷含量的测定 微波灰化-分光光度法

Determination of phosphorus content in coal Microwave ashing-spectrophotometry

MT/T 1195-2020 煤中碳氢测定仪检定规程

Calibration procedures for carbon and hydrogen analyzers in coal

NB/T 10159-2019 工业型煤耐磨强度测定方法

Method for determination of wear resistance of industrial coal briquettes

DL/T 2029-2019 煤中全水分测定 自动仪器法

Automatic Instrument Method for Determination of Total Moisture in Coal

DL/T 1878-2018 燃煤电厂储煤场盘点导则

Inventory Guidelines for Coal Storage Yards of Coal-fired Power Plants

ISO 13605:2018 固体矿物燃料 硬煤灰和可口可乐火山灰中主要元素和微量元素 波长色散X射线荧光光谱法

This document sets out a wavelength dispersive X-ray fluorescence (XRF) procedure for the determination of silicon, aluminium, iron, calcium, magnesium, sodium, potassium, titanium, manganese, phosphorus and sulfur. The method is applicable to coal ashes, coke ashes and boiler ashes having components within the concentration ranges specified in Table 1. Table 1 — Ranges of application of the method Concentration range Oxide % 5 to 100 SiO2 Al2O35 to 80 Fe2O30,1 to 25 CaO 0,05 to 25 K 2O 0,05 to 5 MgO 0,05 to 25 Na2O 0,05 to 50,05 to 5 TiO2 Mn3O40,005 to 5 P2O5a 0,01 to 50,05 to 10ISO 3 NOTE 1   Additional analytes can be included in the method, provided that appropriate validation using reference materials is carried out. NOTE 2   The precision statistics can be determined using suitable reference materials. NOTE 3   The method described in this document has been tested for the following additional analytes: BaO (0,01 % to 1 %); SrO (0,01 % to 1 %) and ZnO (0,005 % to 1 %). a For information relating to phosphorus calculations, refer to Annex D.

Solid mineral fuels - Major and minor elements in coal ash and coke ash - Wavelength dispersive x-ray fluorescence spectrometric method

DB53/T 897-2018 煤中锗含量的测定 电感耦合等离子体原子发射光谱法

Determination of germanium content in coal by inductively coupled plasma atomic emission spectrometry

DL/T 1857-2018 煤中氯含量的测定 氧弹燃烧离子选择电极法

Determination of Chlorine Content in Coal Oxygen Bomb Combustion Ion Selective Electrode Method

ISO 11726:2017 固体矿物燃料.替代分析法的验证指南

This document describes procedures for validating alternative methods of analysis for coal and coke either directly by comparison with the relevant International Standard method or indirectly by comparison with reference materials that have been exhaustively analysed using the relevant International Standard method. The statistical analysis methods used are parametric, i.e. their use is possible only when the characteristic is expressed as a simple number on an approximately linear scale. The results from some methods, for example the Gray-King coke type, are not so expressed and the methods given here need to be used only if the data are converted to a parametric scale.

Solid mineral fuels - Guidelines for the validation of alternative methods of analysis

BS ISO 7404-4:2017 煤的岩相分析方法.显微煤岩类型、显微矿化类型及显微矿质类型组成测定方法

Methods for the petrographic analysis of coals. Method of determining microlithotype, carbominerite and minerite composition

DL/T 1712-2017 火力发电厂煤的自燃倾向特性测定方法

Method for determination of spontaneous combustion tendency characteristics of coal in thermal power plants

DL/T 1713-2017 煤中钾、钠测定方法

Method for Determination of Potassium and Sodium in Coal