D42 重金属矿 标准查询与下载

YS/T 1115.7-2016 铜原矿和尾矿化学分析方法 第7部分：锰量的测定 火焰原子吸收光谱法

Methods for chemical analysis of copper ores and tailings Part 7: Determination of manganese content Flame atomic absorption spectrometry

SN/T 4501.1-2016 镍精矿化学分析方法 第1部分：镍、钴、铜、锰、镁、钙元素含量的测定 电感耦合等离子体原子发射光谱法

Methods for chemical analysis of nickel concentrates Part 1: Determination of elemental contents of nickel, cobalt, copper, manganese, magnesium and calcium by inductively coupled plasma atomic emission spectrometry

BS ISO 10378:2016 铜、铅和硫化锌精矿.金和银含量测定.火试金法和火焰原子吸收光谱法

Copper, lead and zinc sulfide concentrates. Determination of gold and silver. Fire assay gravimetric and flame atomic absorption spectrometric method

GOST R 56857-2016 铜和复杂矿石和其加工产品. 二氧化硅重量分数的测量方法

Copper and complex ores, and products of their processing. Methods of measurement of silicon dioxide weight fraction

GOST R 56856-2016 铜和复杂矿石和其加工产品. 铜重量分数的测量方法

Copper and complex ores, and products of their processing. Methods of measurement of copper weight fraction

GOST R 56859-2016 铜和复杂矿石和其加工产品. 金和银的重量分数的测量方法

Copper and complex ores, and products of their processing. Methods of measurement of gold and silver weight fraction

GOST R 56858-2016 铜和复杂矿石和其加工产品. 锌重量分数的测量方法

Copper and complex ores and products of their processing. Methods of zinc weight fraction measurement

BS ISO 9599:2015 铜, 铅, 锌和硫化镍精矿. 分析样本中湿存水分含量的测定. 重量分析法

Copper, lead, zinc and nickel sulfide concentrates. Determination of hygroscopic moisture content of the analysis sample. Gravimetric method

ISO 9599:2015 硫化铜, 铅, 锌和镍精矿. 分析样本中吸附水分含量的测定. 重量法

This International Standard specifies a gravimetric loss-in-mass method for the determination of the hygroscopic moisture content in analysis samples of copper, lead, zinc, and nickel sulfide concentrates. The method is applicable to copper, lead, zinc, and nickel sulfide concentrates free from volatile organic flotation reagents, for example kerosene, and with hygroscopic moisture contents between 0,05 % (m/m) and 2 % (m/m). The hygroscopic moisture content is used to correct the analysis results from the equilibrated moisture level to the dry basis. NOTE The result of the determination of hygroscopic moisture content using this International Standard should not be reported as part of the analysis of a concentrate sample. Whenever the bulk moisture content of a commercial shipment of concentrate is required, ISO 10251 should be used. The determination of hygroscopic moisture content and the determination of bulk moisture content are connected with each other. In both determinations, the same state of dryness has to be achieved, in order to ascertain the correct metal content of a lot. This method is not applicable to sulfide concentrates that are susceptible to oxidation (see 6.3, note 2). Annex A sets out a modified procedure, which can be used for sulfide concentrates that are susceptible to oxidation.

Copper, lead, zinc and nickel sulfide concentrates - Determination of hygroscopic moisture content of the analysis sample - Gravimetric method

DB43/T 1122-2015 贵铅中铅量的测定Na2EDTA滴定法

Determination of lead content in precious lead Na2EDTA titration method

BS ISO 15247:2015 硫化锌精矿. 银含量的测定. 酸溶解和火焰原子吸收光谱法

Zinc sulfide concentrates. Determination of silver content. Acid dissolution and flame atomic absorption spectrometric method

SN/T 2763.9-2015 红土镍矿化学分析方法 第9部分:交货批水分含量的测定

SN/T 2763的本部分规定了红土镍矿交货批水分含量的测定方法。 本部分适用于红土镍矿交货批水分含量的测定。

Chemical analysis of nickel laterite ores.Part 9:Determination of moisture content of a consignment

DB53/T 707-2015 铜冶炼企业单位产品能源消耗限额及计算方法

本标准规定了铜冶炼企业单位产品的能源消耗（以下简称能耗）限额的技术要求、统计范围和计算方法。 本标准适用于以铜精矿为原料的铜冶炼企业单位产品能耗的计算与考核。

Copper smelting enterprises energy consumption limit and calculation method per unit product

DB53/T 709-2015 电解铝企业单位产品能源消耗限额及计算方法

本标准规定了电解铝企业单位产品能源消耗（以下简称能耗）限额的术语和定义、技术要求、统计范围和计算方法。 本标准适用于电解铝企业单位产品能耗的计算与考核。

Energy Consumption Quota and Calculation Method for Unit Product of Electrolytic Aluminum Enterprises

DB53/T 705-2015 铅冶炼企业单位产品能源消耗限额及计算方法

本标准规定了铅冶炼企业单位产品能源消耗（以下简称能耗）限额的技术要求、统计范围和计算方法。 本标准适用于以铅精矿为原料的铅冶炼企业单位产品能耗的计算与考核。

Energy consumption quota and calculation method per unit product of lead smelting enterprises

DB53/T 708-2015 锡冶炼企业单位产品能源消耗限额及计算方法

本标准规定了锡冶炼企业单位产品的能源消耗(以下简称能耗)限额的技术要求、统计范围和计算方法。 本标准适用于以含锡物料为原料的所有锡冶炼企业的单位产品能耗的计算与考核。

Energy consumption quota and calculation method per unit product of tin smelting enterprises

DB53/T 706-2015 锌冶炼企业单位产品能源消耗限额及计算方法

本标准规定了锌冶炼企业单位产品能源消耗（以下简称能耗）限额的技术要求、统计范围和计算方法。 本标准适用于以锌精矿或铅锌混合精矿为原料的湿法锌冶炼企业单位产品能耗的计算与考核。

Energy Consumption Quota per Unit Product of Zinc Smelting Enterprises and Calculation Method

YS/T 1050.6-2015 铅锑精矿化学分析方法 第6部分:铁量的测定 硫酸铈滴定法

YS/T 1050的本部分规定了铅锑精矿中铁量的测定方法。 本部分适用于铅锑精矿中铁量的测定，测定范围(质量分数)为5.00%～20.00%。

Methods for chemical analysis of lead antimony concentrates.Part 6:Determination of iron content.Cerium sulfate titration method

YS/T 1050.5-2015 铅锑精矿化学分析方法 第5部分:硫量的测定 重量法

YS/T 1050的本部分规定了铅锑精矿中硫量的测定方法。 本部分适用于铅锑精矿中硫量的测定，测定范围(质量分数)为15.00%～30.00%。

Methods for chemical analysis of lead antimony concentrates.Part 5:Determination of sulfur content.Gravimetric method

YS/T 1050.4-2015 铅锑精矿化学分析方法 第4部分:锌量的测定 Na2EDTA滴定法

YS/T 1050的本部分规定了铅锑精矿中锌量的测定方法。 本部分适用于铅锑精矿中锌量的测定，测定范围(质量分数)为1.00%～10.00%。

Methods for chemical analysis of lead antimony concentrates.Part 4:Determination of zinc content.Na₂EDTA titration method