D93 提升、贮运设备 标准查询与下载

AQ 1014-2005 煤矿在用摩擦式提升机系统安全检测检验规范

本标准规定了煤矿在用摩擦式提升机系统安全检测检验的项目和技术要求。 本标准适用于煤矿在用摩擦式提升机系统现场检测检验。

Safety inspecting-testing specification of in-service friction hoist system for coal mine

AQ 1016-2005 煤矿在用提升绞车系统安全检测检验规范

本标准规定了煤矿在用提升绞车系统安全检测检验的项目和技术要求。 本标准适用于煤矿在用矿井绞车系统(包括滚筒直径1.2m及以下严禁载人的矿用提升绞车)现场检测检验。

Safety inspecting-testing specification of in-service hoist system for coal mine

AQ 1015-2005 煤矿在用缠绕式提升机系统安全检测检验规范

本标准规定了煤矿在用缠绕式提升机系统安全检测检验的项目和技术要求。 本标准适用于煤矿在用缠绕式提升机系统(包括滚筒直径1.6m及以上煤矿在用缠绕式矿井提升机)现场检测检验。

Safety inspecting-testing specification of in-service winder system for coal mine

BS 3289:2005 地下矿井用纺织帘布层传送带(包括防火性能).规范

This British Standard specifies requirements for textile carcass conveyor belting for use in underground mines (including fire performance). NOTE 1 For guidance on storage and handling of finished belting, reference should be made to BS ISO 5285. WARNING In the overall assessment of the suitability of conveyor belting for a given use, and in particular for single entry headings, account should be taken of the flame propagation and smoke and toxic fume emission characteristics of the belting material, as well as of the fire precautionary measures, such as smoke detection, over-temperature protection, below ground ventilation, etc. embraced within the total system. NOTE 2 DD 180 describes threshold toxic atmospheres and provides methods for their assessment; reference to this publication is recommended.

Textile carcase conveyor belting for use in underground mines (including fire performance) - Specification

MT/T 926-2004 0.5t、1t矿车立井单绳罐笼

本标准规定了0.5t和1t矿车立井单绳罐笼(以下简称罐笼)的术语和定义、产品分类、技术要求、测试方法、检验规则、标志、包装、运输和贮存。 本标准适用于立井提升1t标准矿车和0.5t翻斗式矿车、材料、设备及人员的罐笼。

Single-rope cage for 0.5t, 1t mine-car in shaft

MT/T 929-2004 矿用高强度紧凑链

本标准规定了矿用高强度紧凑链的型式尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿井下刮板输送机、刮板转载机和刨煤机用高强度紧凑链。

High-tensile steel compact chains for mining

MT/T 522-2004 矿用高强度圆环链检验规范

本标准规定了矿用高强度圆环链(以下简称圆环链)的检验项目、抽样方法与数量、检验方法、检验规则和检验结果的评定。 本标准适用于矿用高强度圆环链的检验。

Inspecting specification of high-tensile steel chains (round link) for mining

DIN 20593-3:2004 矿山用单轨架空轨道.轨道.第3部分:I 140 V 和 I 250外形的直轨和轨道连接装置

This project applies for straight rails for profiles I 140 V and l 250. This rails are used in underground mining for mounting and as leading part for self- or wire-driven systems.

Monorails for mining - Rails - Part 3: Straight rails and rail-connections for profiles I 140 V and I 250

JB/T 7357-2004 耙矿绞车

本标准规定了耙矿绞车的产品分类、要求、试验方法、检验规则、标志、产品使用说明书及包装、运输和贮存。 本标准适用于电动机驱动的耙矿绞车。该绞车主要用于金属矿及其他矿场耙运矿岩,适于水平和倾角不大于44°的斜坡耙运。

Scraper winch

JB/T 3277-2004 矿井提升机和矿用提升绞车 液压站

本标准规定了矿井提升绞车液压站的基本参数、技术要求、试验方法和检验规则、标志、包装、运输和贮存。 本标准适用于非爆炸性气体环境用矿井提升机和矿用提升绞车盘形制动器及径向弹簧制动器的液压站。

Hydraulic station for mine hoists and mine hoisting winches - Hydraulic pressure station

DIN 22114 Berichtigung 1:2003 DIN 22114-2001的技术勘误

The heavy constructions for belt conveyors get mainly installed in the main haulage roads: for the transportation of coal and, by using a smaller angle of traverse, for man riding on the bottom strand

Corrigenda to DIN 22114:2001-12

DIN 22111 Berichtigung 1:2003 DIN 22111-2000的技术勘误

The light constructions for belt conveyors get mainly installed in the gangways close to the working areas: for the transportation of coal and, by using a smaller angle of transverse, for man riding on the bottom strand.

Corrigenda to DIN 22111:2000-03

DIN 22109-6:2003 煤矿用织物输送带.第6部分:检验

The document indicates the testing methods by which the requirements given in DIN 22109-1, -2 and -4 have to be tested.#,,#

Conveyor belts with textile plies for coalmining - Part 6: Testing

DIN 22115:2003 地下煤矿开采用带式输送机.托辊的涂层.要求和检验

This project applies for coating of idlers according DIN 22112-1.

Belt conveyors for underground coalmining - Coating on idlers - Requirements and testing

DIN 22116:2003 地下煤矿开采用带式输送机.DN为159的压辊.尺寸、要求和标记

This standard is valid for pressure idlers with a diameter of 159 mm which are mainly used for the diversion of conveyor belts.

Belt conveyors for underground coal mining - Pressure rollers DN 159 - Dimensions, requirements, marking

DIN 20575-1:2003 轨道运输.地下采矿用乘用车.第1部分:规范

Rail transport - Passenger cars for underground mining - Part 1: Specifications

BS EN 1889-2:2003+A1:2009 地下采矿机械.移动式机械地下作业.安全性.轨道机车

This European standard specifies the safety requirements and tests for rail locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives). 1.1 This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of locomotives when carried out in accordance with the specifications given by the manufacturer or his authorised representative. 1.2 This European standard does not address the special hazards associated with the rack drive of rack and pinion locomotives. 1.3 This European standard does not deal with radiation and vibration. It does not address remote control locomotives or operation in potentially explosive atmospheres. Hazards due to noise are excluded from this standard, but a separate standard is in preparation where hazards due to noise will be addressed. 1.4 This European standard applies to locomotives which are manufactured after the date of issue of this standard.

Machines for underground mines - Mobile machines working Underground - Safety - Rail locomotives

BS EN 12321:2003+A1:2009 地下采矿机械.铠装输送机的安全要求规范

Underground mining machinery - Specification for the safety requirements of armoured face conveyors

JB/T 10347-2002 摩擦式提升机.摩擦衬垫

本标准规定了摩擦式提升机摩擦衬垫的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 　　本标准适用于摩擦式提升机摩擦衬垫。摩擦衬垫用于摩擦式提升机摩擦轮与钢丝绳之间的动力传输，也适用于其他类似场合的动力传输。

Lining for friction hoist

MT/T 920-2002 煤矿防爆特殊型蓄电池式胶套轮电机车型式与参数

本标准规定了煤矿防爆特殊型蓄电池式胶套轮电机车的型式、基本参数和型号编制方法。 本标准适用于煤矿防爆特殊型蓄电池式胶套轮电机车。

The types and parameters of rubber tire battery-powered locomotives for underground coal mine