D98 煤矿专用设备器材 标准查询与下载

MT/T 946-2005 煤矿用增安型高压电缆接线盒

本标准规定了煤矿用增安型高压电缆接线盒的分类与命名、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿用增安型高压电缆接线盒(以下简称接线盒)。

Increased safety high-voltage cables connecting box for coal mine

DIN 22434-10:2005 无烟煤开采的井下照明.照明技术设计原则.第10部分:车间和特殊房屋

This standard specifies the ergonomic and lighting fundamentals for the planning of lighting installations for workshops and special premises in underground hardcoal mining.

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 10: Workshops and special premises

MT 26-2004 KS型矿灯

本标准规定了KS型矿灯的产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KS型矿灯(以下简称矿灯)。

Model KS cap lamp

MT/T 140-2004 采煤机滚筒连接方式及其参数

本标准规定了采煤机螺旋滚筒的连接方式及其相关参数 本标准适用于煤矿采煤机螺旋滚筒的设计、生产及用户对产品的验收。

The mounting type and its parameter for shearer drums

MT/T 321-2004 采煤机螺旋滚筒

本标准规定了采煤机螺旋滚筒的术语和定义、分类和型号命名、要求、试验方法、检验规则、标志、包装与运输。 本标准适用于煤矿地下开采用的采煤机螺旋滚筒(以下简称“滚筒”)。

Helical drum for shearers

MT 927-2004 KL型矿灯

本标准规定了KL型矿灯的产品分类;要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KL型矿灯(以下简称矿灯)。

Model KL cap lamp

MT/T 776-2004 煤矿机械液压系统总成出厂检验规范

本标准规定了煤矿机械液压系统总成出厂检验的技术要求、试验方法、检验规则、标志、包装及运输。 本标准适用于以液压油为工作介质，工作压力不高于31.5MPa 的煤矿机械液压系统总成的出厂检验。

Specification for routine inspection of coal mining machine-hydraulic system assembly

MT 242-2004 KJ型矿灯

本标准规定了KJ型矿灯的产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KJ型矿灯(以下简称矿灯)。

Model KJ cap lamp

AIR FORCE A-A-59603-2004 检测试剂盒,石油,燃料系统结冰抑制剂

The Testing Kit is a complete kit providing a quick, easy method for determining the volume percent of fuel system icing inhibitor (FSII).

TESTING KIT, PETROLEUM, FUEL SYSTEM ICING INHIBITOR

DIN 22434-8:2004 无烟煤矿井下照明.照明工艺设计原理.第8部分:建筑工地用

The document specifies the ergonomic and lighting fundamentals for the planning of lighting installations for building sites in underground hardcoal mining. This standard describes requirements for the illuminance and the arrangement of lighting. The terms building site and motional area are defined.

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 8: For building sites

AIR FORCE A-A-59164-2003 ASTM D56方法中的闪点检测器

This Commercial Item Description (CID), describes Tester, Flash Point, ASTM D56 Method. The flash point tester is used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory

TESTER, FLASH POINT, ASTM D56 METHOD

DIN 22434-2:2003 无烟煤地下开采照明.照明.技术规划基础.第2部分:带防护支架的采煤工作面

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 2: Coalfaces with shield support

DIN 22434-6:2003 无烟煤地下开采照明.照明.技术规划基础.第6部分:巷道掘进操作区

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 6: Area of roadway-driving operation

DIN 22434-5:2003 无烟煤地下开采照明.照明.技术规划基础.第5部分:物料输送区

The document specifies the ergonomic and lighting fundamentals for the planning of lighting installations for material handling places. It defines the term material handling places. Lighting installations shall fulfil the following requirements: clearness of the driveway, working place and transportation area and to facilitate hazard identification especially while working with machines and mechanical equipment as well as to identify people and objects from an adequate distance.#,,#

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 5: Material handling places

DIN 22434-3:2003 无烟煤地下开采照明.照明.技术规划基础.第3部分:T 形接头

This document specifies the ergonomic and lighting fundamentals for the planning of lighting installations in the T-junction area. Lighting installations shall fulfil the following requirements: clearness of the driveway, working place and transportation area and to facilitate hazard identification especially while working on roadway supports and in the back of the conveyor as well as to identify people and objects from an adequate distance. Furthermore, they should be able to identify hazards caused by surmounting transported material and to facilitate controlling operating elements and realizing maintenance work on the equipment.

Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 3: T-junctions

ANSI/UL 198M-2003 矿山用熔断器的安全标准

The July 20, 2007 bulletin is a reaffirmation of the Fourth Edition of the Standard for Safety for Mine-Duty Fuses, UL 198M as an American National Standard, with no changes to the current requirements.

Standard for Safety for Mine-Duty Fuses

MT/T 919-2002 电子数显式收敛计

本标准规定了煤矿本质安全型电子数显式收敛计(以下简称“收敛计”)， 的基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于对煤矿井巷工程进行变形量测的本质安全型收敛计。

Electronic digital display convergence device

AIR FORCE MIL-DTL-7700 G-2002 小型检测列表及空中加油程序飞行手册

This detail specification covers the requirements for the preparation of four (4) types of flight manuals and three (3) types of abbreviated flight manual checklists for all types of aircraft. This specification also includes air refueling procedures that

FLIGHT MANUALS, AIR REFUELING PROCEDURES, AND ABBREVIATED CHECKLISTS [Use In Lieu Of: AIR FORCE MIL-M-007700 B (1)]

MT/T 913-2002 矿用液压螺母及其高强度紧固件

本标准规定了螺纹规格为M24~M48的液压螺母及其配套使用的高强度螺柱、高强度螺母、高强度垫圈的型式尺寸、技术要求、试验方法、检验规则以及标志、包装。 本标准适用于矿用大中型机械设备上有防松要求处的高强度螺栓联接。

Hydraulic nuts and high-strength fasteners for coal mining machinery

MT/T 906-2002 煤矿用隔爆型多功能灯铃信号装置

本标准规定了煤矿用隔爆型多功能灯铃信号装置的产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于煤矿用隔爆型多功能灯铃信号装置(以下简称信号装置)。

Flameproof multifunction lamp-ring signal device for coal machine