E43 石油沥青 标准查询与下载

DIN EN 1430:2009 沥青和沥青粘合剂.沥青乳剂粒子极性的测定.英文版本DIN EN 1430-2009-07

This European Standard specifies a method for the determination of the particle polarity of bituminous emulsions.

Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions; English version of DIN EN 1430:2009-07

NF T66-036:2009 沥青和沥青结合剂.通过蒸馏法测定沥青乳液中的残余粘合剂和石油馏分的含量

Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation.

NF T66-043-1:2009 沥青和沥青粘合剂.利用浸水试验测定减少和稀释的沥青结合料粘合性.总合法

Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method.

DIN EN 13108-21 Berichtigung 1:2009 沥青混合物.材料规范.第21部分:工厂生产控制.技术勘误DIN EN 13108-21-2006

Bituminous mixtures - Material specifications - Part 21: Factory Production Control; German version EN 13108-21:2006, Corrigendum to DIN EN 13108-21:2006-07; German version EN 13108-21:2006/AC:2008

DIN EN 13108-20 Berichtigung 1:2009 沥青混合物.材料规范.第20部分:类型试验.技术勘误DIN EN 13108-20-2006

Bituminous mixtures - Material specifications - Part 20: Type Testing; German version EN 13108-20:2006, Corrigendum to DIN EN 13108-20:2006-07; German version EN 13108-20:2006/AC:2008

BS EN 1429:2009 沥青和沥青粘合剂.沥青乳液的筛余物和筛分存储稳定性的测定

This European Standard specifies methods utilizing sieving for the determination of the quantity of coarse particles of binder present in bitumen emulsions, and for the determination of storage stability.

Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving

BS EN 13303:2009 沥青及沥青粘合剂.工业沥青受热质量损失的测定

This European Standard specifies a method for the determination of the loss in mass of industrial bitumen after heating. The method is used to detect volatile components. NOTE The users of the method are encouraged to gather comparative information on binders using this standard, EN 13303 and EN 12607-2 [1] at 163 °C to facilitate the withdrawal of EN 13303 at the next systematic review.

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen

BS EN 12848:2009 沥青和沥青粘合剂 沥青乳液与水泥混合稳定性的测定

This European Standard specifies a method for the determination of mixing stability of bituminous emulsions with cement. It applies to overstabilized cationic bituminous emulsions and to slow-setting and overstabilized anionic bituminous emulsions.

Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions

BS EN 13305:2009 沥青和沥青粘合剂.工业硬沥青规范的框架

This European Standard provides a framework for the specification of hard industrial bitumens used mainly in flooring, varnishes, mineral rubber, roofing and mastic. Within Europe several types of hard industrial bitumen are used, and dependent upon traditional practices, different grades may be used for the same purpose. The framework given in this European standard provides a basis for quality agreements to be established between supplier and client. The hard industrial bitumen products are graded by the limits of the ring and ball softening point values, expressed as multiples of 5, and are characterised by an H in front of the values.

Bitumen and bituminous binders - Framework for specification of hard industrial bitumens

BS EN 12849:2009 沥青和沥青粘合剂 沥青乳液渗透力的测定

This European Standard specifies a method for the determination of the penetration power of bituminous emulsions, through reference filler. This test method is applicable to low-viscosity bituminous emulsions.

Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions

BS EN 12850:2009 沥青和沥青粘合剂.沥青乳化液pH值的测定

This European Standard specifies a method for measuring the pH value of bituminous emulsions. It is applicable to anionic, cationic bituminous emulsions and bituminous emulsions prepared by means of non – ionic surfactant. NOTE In certain circumstances, the pH value can provide an indication of the ionic character of a bitumen emulsion. However, this indication should be confirmed by a particle polarity test conforming to EN 1430.

Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions

BS EN 1431:2009 沥青和沥青粘合剂.使用蒸馏法测定从沥青乳液中得到的残余粘合剂和油馏分

This European Standard specifies a method for the quantitative determination of residual binder and oil distillate in bituminous emulsions. The method can also be used to obtain residue and oil distillate for further testing. NOTE The properties of the material recovered in the test are not necessarily the same as those of the original materials from which the emulsion was produced, especially for polymer modified bitumens.

Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation

BS EN 13075-1:2009 沥青和沥青粘合剂.破损行为的测定.第1部分:使用矿物填料法测定阳离子沥青乳剂的断裂值测定

This European Standard specifies a method for the determination of the breaking value of cationic bituminous emulsions.

Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method

BS EN 15626:2009 沥青和沥青粘合剂.用水浸试验测定稀释沥青和助溶沥青粘合剂的粘合性

This document specifies a method for the determination of the adhesivity of cut-back and fluxed bituminous binders coated onto aggregate when immersed in water.

Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method

BS EN 1430:2009 沥青和沥青粘合剂 沥青乳液颗粒极性的测定

This European Standard specifies a method for the determination of the particle polarity of bituminous emulsions.

Bitumen and bituminous binders. Determination of particle polarity of bituminous emulsions

BS EN 13304:2009 沥青及沥青粘合剂.氧化沥青的规范框架

This European Standard provides a framework for the specification of oxidised bitumens used mainly in roofing, waterproofing, adhesives and thermal and phonic insulations. Within Europe several types of oxidised bitumens are used and, dependent on climatic conditions, type of building construction and traditional practices, different grades may be used for the same purpose. The framework given in this European standard provides a basis for quality agreements to be established between supplier and client. The oxidised bitumen products are graded by a combination of the values of ring and ball softening point, and penetration at 25 °C, expressed as multiples of 5.

Bitumen and bituminous binders - Framework for specification of oxidised bitumen

DB65/T 2956-2009 彩色沥青基料

Color Asphalt Base Material

JIS K 2208 AMD 1:2009 沥青乳剂(修改件1)

This translation has been made based on the Amendment to th~ origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS K 2208:2000 is partially replaced with this Amend- ment.

Asphalt emulsion (Amendment 1)

ASTM D140/D140M-09 沥青材料的抽样标准实施规程

Sampling is as important as testing, and precautions shall be taken to obtain samples to show the true nature and condition of the materials. Samples are taken for either of the following two purposes: To represent as nearly as possible an average of the bulk of the materials sampled, or To ascertain the maximum variation in characteristics which the material possesses.1.1 This practice applies to the sampling of bituminous materials at points of manufacture, storage, or delivery. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling Bituminous Materials

ASTM D7403-09 标准的乳化沥青残留测定的标准试验方法低温真空蒸馏

This test method can be used for quantitative determination of residue in emulsified asphalts at a temperature of 135°C (275°F) with a 60 minute distillation test using current distillation apparatus. This method is suitable to obtain residues for service evaluation, quality control, and research. This distillation method is not intended to produce residues equivalent to the Test Method D 6997 260°C (500°F) distillation procedure.1.1 This method covers the quantitative determination of residue in emulsified asphalts composed principally of a semisolid or liquid asphaltic base, water, and an emulsifying agent. The emulsified asphalts will generally contain polymeric materials. It is especially suitable for emulsified asphalt residue properties that may be altered at the high temperature 260°C (500°F) distillation. Since there is currently not a precision statement for this procedure, it is recommended to the user that this procedure not be used for buy/sell purposes at the present time. 1.2 The values stated in SI units are to be regarded as the standard. Values in parentheses in inch-pound units are provided for informational purposes only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation